# Latest

**URL:** https://discourse.slicer.org/latest.md?page=147

[Latest](https://discourse.slicer.org/latest.md) · [Categories](https://discourse.slicer.org/categories.md) · [Tags](https://discourse.slicer.org/tags.md)

**Page:** 148

---

## [Converting a 2D numpy array to a VTK image](https://discourse.slicer.org/t/converting-a-2d-numpy-array-to-a-vtk-image/34825)

<div class="topic-metadata">

**Author:** [@yaraabdelazim](https://discourse.slicer.org/u/yaraabdelazim)\
**Replies:** 4\
**Last updated:** [March 12, 2024, 1:51pm UTC](https://discourse.slicer.org/t/converting-a-2d-numpy-array-to-a-vtk-image/34825 "2024-03-12T13:51:52Z")

</div>

Hello, I am trying to detect edges in a volume and therefore, I use OpenCV. After converting my slice to a numpy array and detecting the edges, I am able to display it in my Jupyter notebook. Here is the result I get: …

---

## [How to calculate the signal-to-noise ratio of magnetic resonance image](https://discourse.slicer.org/t/how-to-calculate-the-signal-to-noise-ratio-of-magnetic-resonance-image/34845)

<div class="topic-metadata">

**Author:** [@chonglou](https://discourse.slicer.org/u/chonglou)\
**Replies:** 0\
**Last updated:** [March 12, 2024, 12:22pm UTC](https://discourse.slicer.org/t/how-to-calculate-the-signal-to-noise-ratio-of-magnetic-resonance-image/34845 "2024-03-12T12:22:25Z")

</div>

Operating system: Slicer version:5.2.1 Expected behavior:How to calculate the signal-to-noise ratio of magnetic resonance image Actual behavior:

---

## [Lung vessels model](https://discourse.slicer.org/t/lung-vessels-model/34743)

<div class="topic-metadata">

**Author:** [@Vikram](https://discourse.slicer.org/u/Vikram)\
**Replies:** 5\
**Last updated:** [March 12, 2024, 12:06pm UTC](https://discourse.slicer.org/t/lung-vessels-model/34743 "2024-03-12T12:06:54Z")

</div>

I segmented lung vessels model by using 3d slicer but the problem is that i want to print this model but vessels are connected to each other , what i can do there is any other way to do. please help me struck in my resea…

---

## [IGT volume reconstruction: Output spacing](https://discourse.slicer.org/t/igt-volume-reconstruction-output-spacing/34253)

<div class="topic-metadata">

**Author:** [@Olivier](https://discourse.slicer.org/u/Olivier)\
**Replies:** 3\
**Last updated:** [March 12, 2024, 10:55am UTC](https://discourse.slicer.org/t/igt-volume-reconstruction-output-spacing/34253 "2024-03-12T10:55:00Z")

</div>

Hello, I am using the Volume reconstruction feature from the IGT module and have a question about the Output spacing parameter specifically. I am using ultrasound data obtained from manual sweeps, about in the same dir…

---

## [Is there a way to segment the pelvic floor muscles?](https://discourse.slicer.org/t/is-there-a-way-to-segment-the-pelvic-floor-muscles/34826)

<div class="topic-metadata">

**Author:** [@Benny\_Zamir](https://discourse.slicer.org/u/Benny_Zamir)\
**Replies:** 1\
**Last updated:** [March 12, 2024, 4:17am UTC](https://discourse.slicer.org/t/is-there-a-way-to-segment-the-pelvic-floor-muscles/34826 "2024-03-12T04:17:53Z")

</div>

Hi Is there a way to segment the pelvic floor muscles?

---

## [How to access the threshold slider in volume rendering module through python?](https://discourse.slicer.org/t/how-to-access-the-threshold-slider-in-volume-rendering-module-through-python/34820)

<div class="topic-metadata">

**Author:** [@ebin1234](https://discourse.slicer.org/u/ebin1234)\
**Replies:** 2\
**Last updated:** [March 12, 2024, 4:09am UTC](https://discourse.slicer.org/t/how-to-access-the-threshold-slider-in-volume-rendering-module-through-python/34820 "2024-03-12T04:09:16Z")

</div>

Hello, I would like to know how to access the threshold slider in volume rendering module through python. By changing the threshold values in the code will change the upper and lower limits of the slider. The scalar opa…

---

## [Where can I find code for functionalities like segmentation, registration etc](https://discourse.slicer.org/t/where-can-i-find-code-for-functionalities-like-segmentation-registration-etc/34831)

<div class="topic-metadata">

**Author:** [@Arun03Kumar](https://discourse.slicer.org/u/Arun03Kumar)\
**Replies:** 1\
**Last updated:** [March 12, 2024, 4:04am UTC](https://discourse.slicer.org/t/where-can-i-find-code-for-functionalities-like-segmentation-registration-etc/34831 "2024-03-12T04:04:14Z")

</div>

Dear 3D slicer family. I am learning the codebase for learning purpose, I learned some UI implementation techniques, but I want to create a toggle button in segmentation or in functionality tools section so that it init…

---

## [I cannot load the .mat file.](https://discourse.slicer.org/t/i-cannot-load-the-mat-file/34840)

<div class="topic-metadata">

**Author:** [@Leitbe](https://discourse.slicer.org/u/Leitbe)\
**Replies:** 1\
**Last updated:** [March 12, 2024, 3:14am UTC](https://discourse.slicer.org/t/i-cannot-load-the-mat-file/34840 "2024-03-12T03:14:02Z")

</div>

Operating system:Windows11 Slicer version:5.6.1 Expected behavior:Load successful Actual behavior:load failed.

---

## [2024.03.12 Weekly Meeting](https://discourse.slicer.org/t/2024-03-12-weekly-meeting/34830)

<div class="topic-metadata">

**Author:** [@Sam\_Horvath](https://discourse.slicer.org/u/Sam_Horvath)\
**Replies:** 0\
**Last updated:** [March 11, 2024, 5:44pm UTC](https://discourse.slicer.org/t/2024-03-12-weekly-meeting/34830 "2024-03-11T17:44:49Z")

</div>

Tomorrow, we will be having our next weekly hangout at 10:00 AM ET until 11:00 AM ET . Anyone is welcome to join at this link: https://bit.ly/slicer-googlemeet-hosted-by-kitware Agenda: Extension dashboard status P…

---

## [A problem about the feature extraction of 3D dose distribution](https://discourse.slicer.org/t/a-problem-about-the-feature-extraction-of-3d-dose-distribution/34824)

<div class="topic-metadata">

**Author:** [@fanfan](https://discourse.slicer.org/u/fanfan)\
**Replies:** 0\
**Last updated:** [March 11, 2024, 2:24pm UTC](https://discourse.slicer.org/t/a-problem-about-the-feature-extraction-of-3d-dose-distribution/34824 "2024-03-11T14:24:21Z")

</div>

Hi teachers,as a novice, I already know that medical images can be extracted with image features by 3Dslicer ,but I want to use 3D slicer to extract dose data features from 3D radiotherapy dose images. Is it possible? Th…

---

## [DICOM load failure](https://discourse.slicer.org/t/dicom-load-failure/34823)

<div class="topic-metadata">

**Author:** [@ahmed\_barakat](https://discourse.slicer.org/u/ahmed_barakat)\
**Replies:** 1\
**Last updated:** [March 11, 2024, 2:23pm UTC](https://discourse.slicer.org/t/dicom-load-failure/34823 "2024-03-11T14:23:45Z")

</div>

Operating system: win 11 Slicer version: 5.4.0 Expected behavior: loading dicom files Actual behavior: error occured while loading certain files I am trying to load dicom files as usual by dragging and dropping and I…

---

## [radiomics problem](https://discourse.slicer.org/t/radiomics-problem/34809)

<div class="topic-metadata">

**Author:** [@mhs](https://discourse.slicer.org/u/mhs)\
**Replies:** 3\
**Last updated:** [March 11, 2024, 11:56am UTC](https://discourse.slicer.org/t/radiomics-problem/34809 "2024-03-11T11:56:03Z")

</div>

why i use radiomics to image feature extraction but no data

---

## [Slicer Segmentation inverted normals for closed surface representation](https://discourse.slicer.org/t/slicer-segmentation-inverted-normals-for-closed-surface-representation/34762)

<div class="topic-metadata">

**Author:** [@Thibault\_Pelletier](https://discourse.slicer.org/u/Thibault_Pelletier)\
**Replies:** 4\
**Last updated:** [March 11, 2024, 7:22am UTC](https://discourse.slicer.org/t/slicer-segmentation-inverted-normals-for-closed-surface-representation/34762 "2024-03-11T07:22:08Z")

</div>

Hi everyone, We have recently noticed a problem when exporting STL and OBJ from segmentations in Slicer. Depending on the Volume’s affine, the generated normals can point inside instead of outside. This doesn’t cause a…

---

## [How to map the volume of bladder tumor](https://discourse.slicer.org/t/how-to-map-the-volume-of-bladder-tumor/34817)

<div class="topic-metadata">

**Author:** [@mhs](https://discourse.slicer.org/u/mhs)\
**Replies:** 0\
**Last updated:** [March 11, 2024, 4:49am UTC](https://discourse.slicer.org/t/how-to-map-the-volume-of-bladder-tumor/34817 "2024-03-11T04:49:45Z")

</div>

I want to use 3d slicer to extract image data from bladder cancer ct, such as tumor volume. Do you have any good extensions recommendatons

---

## [Unspecified Error Opening Python-Generated DICOM File in 3D Slicer](https://discourse.slicer.org/t/unspecified-error-opening-python-generated-dicom-file-in-3d-slicer/34813)

<div class="topic-metadata">

**Author:** [@rcapozza](https://discourse.slicer.org/u/rcapozza)\
**Replies:** 1\
**Last updated:** [March 10, 2024, 6:40pm UTC](https://discourse.slicer.org/t/unspecified-error-opening-python-generated-dicom-file-in-3d-slicer/34813 "2024-03-10T18:40:55Z")

</div>

Hello, I’ve created a DICOM file using a Python script that processes a pixel array. This file opens without any issues in applications like Fiji and ezDICOM, indicating that the data is intact and correctly formatted a…

---

## [Segmenting outer heart walls & septum for developing heart mold](https://discourse.slicer.org/t/segmenting-outer-heart-walls-septum-for-developing-heart-mold/34808)

<div class="topic-metadata">

**Author:** [@Marthe](https://discourse.slicer.org/u/Marthe)\
**Replies:** 0\
**Last updated:** [March 10, 2024, 1:52pm UTC](https://discourse.slicer.org/t/segmenting-outer-heart-walls-septum-for-developing-heart-mold/34808 "2024-03-10T13:52:17Z")

</div>

Dear all For my Master Thesis I need an ± anatomically correct, physical heart phantom and for this I should produce a heart mold. I intended to make a heart mold based on ideas described in the work of Tibamoso-Pedraza…

---

## [Save view slices to .PNG or .jpeg](https://discourse.slicer.org/t/save-view-slices-to-png-or-jpeg/34806)

<div class="topic-metadata">

**Author:** [@joanne40226](https://discourse.slicer.org/u/joanne40226)\
**Replies:** 0\
**Last updated:** [March 10, 2024, 7:01am UTC](https://discourse.slicer.org/t/save-view-slices-to-png-or-jpeg/34806 "2024-03-10T07:01:22Z")

</div>

Hi community! I now need to save all of the slices from the Red node view. I can only do it by copy image manually. I’m wondering if I can do it in the python interactor to save all slices in a command? Thank you.

---

## [loading failed: Unable to allocate 113 GiB](https://discourse.slicer.org/t/loading-failed-unable-to-allocate-113-gib/34801)

<div class="topic-metadata">

**Author:** [@aochaoyu](https://discourse.slicer.org/u/aochaoyu)\
**Replies:** 2\
**Last updated:** [March 9, 2024, 10:41pm UTC](https://discourse.slicer.org/t/loading-failed-unable-to-allocate-113-gib/34801 "2024-03-09T22:41:52Z")

</div>

I use the Image Stacks module, and a Slicer error window pops up. The content is “loading failed: Unable to allocate 113 GiB for an array with shape (206,19200,30720) and data type uint8”. I would like to ask the seniors…

---

## [Exit code to terminate SPHARM-PDM upon completion in CLI?](https://discourse.slicer.org/t/exit-code-to-terminate-spharm-pdm-upon-completion-in-cli/34803)

<div class="topic-metadata">

**Author:** [@kmadi](https://discourse.slicer.org/u/kmadi)\
**Replies:** 0\
**Last updated:** [March 9, 2024, 5:20pm UTC](https://discourse.slicer.org/t/exit-code-to-terminate-spharm-pdm-upon-completion-in-cli/34803 "2024-03-09T17:20:12Z")

</div>

Hello! I’ve spoken to a couple of the developers in person but I figured I’d ask here for a wider reach. I’m currently using a python script to execute the SPHARM-PDM module in a command line interface (CLI) via python’…

---

## [Rabbit brain parcellation by Slicer](https://discourse.slicer.org/t/rabbit-brain-parcellation-by-slicer/34802)

<div class="topic-metadata">

**Author:** [@Kousno](https://discourse.slicer.org/u/Kousno)\
**Replies:** 0\
**Last updated:** [March 9, 2024, 5:20pm UTC](https://discourse.slicer.org/t/rabbit-brain-parcellation-by-slicer/34802 "2024-03-09T17:20:03Z")

</div>

Operating system:PC Slicer version:3.6.1 Expected behavior: Actual behavior:

---

## [Regarding the issue of different rendering results in various versions:](https://discourse.slicer.org/t/regarding-the-issue-of-different-rendering-results-in-various-versions/34794)

<div class="topic-metadata">

**Author:** [@slicer365](https://discourse.slicer.org/u/slicer365)\
**Replies:** 2\
**Last updated:** [March 9, 2024, 12:56pm UTC](https://discourse.slicer.org/t/regarding-the-issue-of-different-rendering-results-in-various-versions/34794 "2024-03-09T12:56:31Z")

</div>

Why do the rendering results differ between recent new versions and stable versions? In fact, the rendering in the previous versions was better. Has the renderer been redesigned in the new version?

---

## [How to access Labelmap indexes and change them?](https://discourse.slicer.org/t/how-to-access-labelmap-indexes-and-change-them/34797)

<div class="topic-metadata">

**Author:** [@apparrilla](https://discourse.slicer.org/u/apparrilla)\
**Replies:** 0\
**Last updated:** [March 9, 2024, 12:29pm UTC](https://discourse.slicer.org/t/how-to-access-labelmap-indexes-and-change-them/34797 "2024-03-09T12:29:39Z")

</div>

Hi everyone! I´m trying to manage imports from mask volumes and have some trouble with index of segments inside them. For example: I have a mask.nii.gz with 3 segments inside (1:bone, 2:fat , 3:muscle) I also have a …

---

## [Failed to fetch models from remote server. make sure server address is correct and \<server\_uri\>/v1/models is accessible in browser](https://discourse.slicer.org/t/failed-to-fetch-models-from-remote-server-make-sure-server-address-is-correct-and-server-uri-v1-models-is-accessible-in-browser/26015)

<div class="topic-metadata">

**Author:** [@platanus](https://discourse.slicer.org/u/platanus)\
**Replies:** 9\
**Last updated:** [March 9, 2024, 5:20am UTC](https://discourse.slicer.org/t/failed-to-fetch-models-from-remote-server-make-sure-server-address-is-correct-and-server-uri-v1-models-is-accessible-in-browser/26015 "2024-03-09T05:20:50Z")

</div>

Hello. 3D-Slicer members. I have used well NVIDIA AIAA module in 3d-slicer since June first, 2022. However, it occurred some error nvidia aiaa module in 3d-slicer yesterday. The occurred error is as following. When …

---

## [Fixing image spacing for ultrasound images](https://discourse.slicer.org/t/fixing-image-spacing-for-ultrasound-images/34487)

<div class="topic-metadata">

**Author:** [@Arian\_Amini](https://discourse.slicer.org/u/Arian_Amini)\
**Replies:** 10\
**Last updated:** [March 8, 2024, 10:35pm UTC](https://discourse.slicer.org/t/fixing-image-spacing-for-ultrasound-images/34487 "2024-03-08T22:35:19Z")

</div>

Hello, I recently began using 3D Slicer to measure ultrasound images, but the ruler isn’t at a 1:1 scale with the ultrasound images (see attached). Other forum posts state that this is an image spacing issue that can be…

---

## [Wayland: \[VTK\] GLEW could not be initialized: Unknown error](https://discourse.slicer.org/t/wayland-vtk-glew-could-not-be-initialized-unknown-error/34788)

<div class="topic-metadata">

**Author:** [@chir.set](https://discourse.slicer.org/u/chir.set)\
**Replies:** 2\
**Last updated:** [March 8, 2024, 9:24pm UTC](https://discourse.slicer.org/t/wayland-vtk-glew-could-not-be-initialized-unknown-error/34788 "2024-03-08T21:24:57Z")

</div>

Hi all, KDE on Arch Linux is now at version 6 and uses Wayland by default. X11 is still available but support seems decreased, and it will probably stop some day. The problem with Slicer is the appearance of this messa…

---

## [Having trouble to fuse MRI PET images from mice brain-newbie](https://discourse.slicer.org/t/having-trouble-to-fuse-mri-pet-images-from-mice-brain-newbie/34770)

<div class="topic-metadata">

**Author:** [@Aurorasp](https://discourse.slicer.org/u/Aurorasp)\
**Replies:** 1\
**Last updated:** [March 8, 2024, 9:20pm UTC](https://discourse.slicer.org/t/having-trouble-to-fuse-mri-pet-images-from-mice-brain-newbie/34770 "2024-03-08T21:20:52Z")

</div>

Operating system: Windows11 pro Slicer version: 5.4 Expected behavior: Actual behavior: Hi all I am very new to all this, and Slicer was the only tool I found online for Windows. I know very well the neuropathology …

---

## [Trimming normal to boundary](https://discourse.slicer.org/t/trimming-normal-to-boundary/34791)

<div class="topic-metadata">

**Author:** [@Beth\_Thompson](https://discourse.slicer.org/u/Beth_Thompson)\
**Replies:** 2\
**Last updated:** [March 8, 2024, 8:49pm UTC](https://discourse.slicer.org/t/trimming-normal-to-boundary/34791 "2024-03-08T20:49:08Z")

</div>

Hi, I have a 3D model of a pulmonary artery generated in SimVascular. I am trying to add extensions to it, but first I need to clip the ends to open it. I would like to trim the ends just the tiniest bit to open them, a…

---

## [Python code controls the display of a certain layer of slices in the view](https://discourse.slicer.org/t/python-code-controls-the-display-of-a-certain-layer-of-slices-in-the-view/34781)

<div class="topic-metadata">

**Author:** [@petit223](https://discourse.slicer.org/u/petit223)\
**Replies:** 0\
**Last updated:** [March 8, 2024, 3:05pm UTC](https://discourse.slicer.org/t/python-code-controls-the-display-of-a-certain-layer-of-slices-in-the-view/34781 "2024-03-08T15:05:01Z")

</div>

In the development of the 3D Slicer plug-in, I want to automatically display the corresponding slice on the Green view based on the serial number of the magnetic resonance image entered by the user (I don’t care about th…

---

## [Looking for old Slicer 3D source code with wxWidgets and VTK](https://discourse.slicer.org/t/looking-for-old-slicer-3d-source-code-with-wxwidgets-and-vtk/34752)

<div class="topic-metadata">

**Author:** [@keri](https://discourse.slicer.org/u/keri)\
**Replies:** 17\
**Last updated:** [March 8, 2024, 9:11am UTC](https://discourse.slicer.org/t/looking-for-old-slicer-3d-source-code-with-wxwidgets-and-vtk/34752 "2024-03-08T09:11:49Z")

</div>

Hi, The question is not about Slicer 3D but I remember I’ve read that Slicer used to be using wxWidgets before it was translated to Qt. Now there is a task to understand how can I combine wxWidgets with VTK (even I don…

---

## [Slicer and MonaiLabel installations - best practices for non admin user](https://discourse.slicer.org/t/slicer-and-monailabel-installations-best-practices-for-non-admin-user/34746)

<div class="topic-metadata">

**Author:** [@evaherbst](https://discourse.slicer.org/u/evaherbst)\
**Replies:** 4\
**Last updated:** [March 8, 2024, 7:34am UTC](https://discourse.slicer.org/t/slicer-and-monailabel-installations-best-practices-for-non-admin-user/34746 "2024-03-08T07:34:08Z")

</div>

Hi all, I finally acquired a computer where I can run MonaiLabel. I will have students working on segmenting the data, and I want them to be able to iteratively train the model (so use it to infer, then adjust, then us…

[Previous page](https://discourse.slicer.org/latest.md?page=146)

[Next page](https://discourse.slicer.org/latest.md?page=148)
