# Latest

**URL:** https://discourse.slicer.org/latest.md?page=322

[Latest](https://discourse.slicer.org/latest.md) · [Categories](https://discourse.slicer.org/categories.md) · [Tags](https://discourse.slicer.org/tags.md)

**Page:** 323

---

## [Wrong message in extracting radiomics about 64-bit float](https://discourse.slicer.org/t/wrong-message-in-extracting-radiomics-about-64-bit-float/11669)

<div class="topic-metadata">

**Author:** [@zhangqw](https://discourse.slicer.org/u/zhangqw)\
**Replies:** 6\
**Last updated:** [March 11, 2022, 8:53am UTC](https://discourse.slicer.org/t/wrong-message-in-extracting-radiomics-about-64-bit-float/11669 "2022-03-11T08:53:02Z")

</div>

When I extracted from 3D segment, some could be extracted but some failed, the wrong messgae is as follows: \[2020-05-22 21:40:45\] E: radiomics.script: Feature extraction failed! Traceback (most recent call last): File…

---

## [How Can I convert the levelsets segment results(can use marchingcube get surface) to volume mask?](https://discourse.slicer.org/t/how-can-i-convert-the-levelsets-segment-results-can-use-marchingcube-get-surface-to-volume-mask/22304)

<div class="topic-metadata">

**Author:** [@gang\_fang](https://discourse.slicer.org/u/gang_fang)\
**Replies:** 1\
**Last updated:** [March 11, 2022, 6:40am UTC](https://discourse.slicer.org/t/how-can-i-convert-the-levelsets-segment-results-can-use-marchingcube-get-surface-to-volume-mask/22304 "2022-03-11T06:40:48Z")

</div>

Hi, I have used the fastmarching to get the levelset surface, but I want to use the segmentation mask. How can I convert ? any advice? Best, gang

---

## [FreeSurfer output loading on slicer via command line](https://discourse.slicer.org/t/freesurfer-output-loading-on-slicer-via-command-line/22055)

<div class="topic-metadata">

**Author:** [@Tejasvi0409](https://discourse.slicer.org/u/Tejasvi0409)\
**Replies:** 5\
**Last updated:** [March 11, 2022, 4:36am UTC](https://discourse.slicer.org/t/freesurfer-output-loading-on-slicer-via-command-line/22055 "2022-03-11T04:36:51Z")

</div>

I have been able to load freesurfer volume outputs on the slicer, import segmentations, and perform radiomic feature extraction using the slicer application. However, I would like to do the same using the command line in…

---

## [Slicer 4 reaches 1 million downloads](https://discourse.slicer.org/t/slicer-4-reaches-1-million-downloads/22439)

<div class="topic-metadata">

**Author:** [@jamesobutler](https://discourse.slicer.org/u/jamesobutler)\
**Replies:** 1\
**Last updated:** [March 11, 2022, 4:35am UTC](https://discourse.slicer.org/t/slicer-4-reaches-1-million-downloads/22439 "2022-03-11T04:35:06Z")

</div>

According to the download stats page looks like Slicer 4 passed 1 million downloads on February 20th 2022 :tada: . Currently the count is 1,010,048 as of March 10th 2022. cc: @jcfr @pieper @lassoan

---

## [SlicerDMRI cannot be installed.](https://discourse.slicer.org/t/slicerdmri-cannot-be-installed/22441)

<div class="topic-metadata">

**Author:** [@lizhihong](https://discourse.slicer.org/u/lizhihong)\
**Replies:** 1\
**Last updated:** [March 10, 2022, 9:27pm UTC](https://discourse.slicer.org/t/slicerdmri-cannot-be-installed/22441 "2022-03-10T21:27:16Z")

</div>

version 4.13.0 revision 30691 built 2022-03-10

---

## [how to change line color?](https://discourse.slicer.org/t/how-to-change-line-color/22440)

<div class="topic-metadata">

**Author:** [@wiselyfox](https://discourse.slicer.org/u/wiselyfox)\
**Replies:** 0\
**Last updated:** [March 10, 2022, 9:25pm UTC](https://discourse.slicer.org/t/how-to-change-line-color/22440 "2022-03-10T21:25:46Z")

</div>

I use ‘vtkMRMLMarkupsLineNode’ function to define five lines,but how to change these lines’s color? use python complete this job . slicer.util.loadMarkupsFiducialList(“D:\\m.fcsv”) import numpy as np def file2array(…

---

## [Annotation of two different volumes at the same time](https://discourse.slicer.org/t/annotation-of-two-different-volumes-at-the-same-time/22292)

<div class="topic-metadata">

**Author:** [@Karl-Philippe](https://discourse.slicer.org/u/Karl-Philippe)\
**Replies:** 6\
**Last updated:** [March 10, 2022, 5:01pm UTC](https://discourse.slicer.org/t/annotation-of-two-different-volumes-at-the-same-time/22292 "2022-03-10T17:01:27Z")

</div>

Hi, I’m new to Slicer and was wondering if it’s possible to annotate two different volumes (in a three-by-three view, for example) at the same time for registration purposes? In other words, is it possible to display tw…

---

## [getFirstNodeByName() returns None when '(' or ')' is in the name](https://discourse.slicer.org/t/getfirstnodebyname-returns-none-when-or-is-in-the-name/22437)

<div class="topic-metadata">

**Author:** [@koeglfryderyk](https://discourse.slicer.org/u/koeglfryderyk)\
**Replies:** 1\
**Last updated:** [March 10, 2022, 4:56pm UTC](https://discourse.slicer.org/t/getfirstnodebyname-returns-none-when-or-is-in-the-name/22437 "2022-03-10T16:56:17Z")

</div>

Is it a feature or a bug that slicer.util.getFirstNodeByName() returns None when parentheses are in the name of a node?

---

## [Except to reconstruction VTA like LEAD-DBS by using 3D Slicer model NetStim](https://discourse.slicer.org/t/except-to-reconstruction-vta-like-lead-dbs-by-using-3d-slicer-model-netstim/22388)

<div class="topic-metadata">

**Author:** [@zhang](https://discourse.slicer.org/u/zhang)\
**Replies:** 3\
**Last updated:** [March 10, 2022, 4:29am UTC](https://discourse.slicer.org/t/except-to-reconstruction-vta-like-lead-dbs-by-using-3d-slicer-model-netstim/22388 "2022-03-10T04:29:08Z")

</div>

Operating system:win 10 Slicer version:4.13(2022-02-28) Expected behavior: Actual behavior:How to use 3D Slicer for DBS tissue activation area (VTA) reconstruction?

---

## [Slicer Module import error: dll load failed](https://discourse.slicer.org/t/slicer-module-import-error-dll-load-failed/22417)

<div class="topic-metadata">

**Author:** [@jiachaoliang](https://discourse.slicer.org/u/jiachaoliang)\
**Replies:** 1\
**Last updated:** [March 10, 2022, 1:59am UTC](https://discourse.slicer.org/t/slicer-module-import-error-dll-load-failed/22417 "2022-03-10T01:59:24Z")

</div>

I got an error when to use “import cv2”. “ModuleNotFoundError: No Module named ‘cv2’” But I had opencv-python-4.5.5.64 successfully installed right before this error code. Any further clue? Many thanks!

---

## [Incorrect number of segments when loading DICOM segmentation file](https://discourse.slicer.org/t/incorrect-number-of-segments-when-loading-dicom-segmentation-file/22387)

<div class="topic-metadata">

**Author:** [@DeepaKrishnaswamy](https://discourse.slicer.org/u/DeepaKrishnaswamy)\
**Replies:** 4\
**Last updated:** [March 10, 2022, 1:07am UTC](https://discourse.slicer.org/t/incorrect-number-of-segments-when-loading-dicom-segmentation-file/22387 "2022-03-10T01:07:03Z")

</div>

Hi, I created and saved a DICOM segmentation file: I checked the logs, and it seems to have exported successfully. However, when I load this file, it seems that the number of regions is doubled: Checking the logs,…

---

## [Is there any way to somehow hover over an obj in Slicer and see its name](https://discourse.slicer.org/t/is-there-any-way-to-somehow-hover-over-an-obj-in-slicer-and-see-its-name/22422)

<div class="topic-metadata">

**Author:** [@NoobForSlicer](https://discourse.slicer.org/u/NoobForSlicer)\
**Replies:** 1\
**Last updated:** [March 10, 2022, 12:47am UTC](https://discourse.slicer.org/t/is-there-any-way-to-somehow-hover-over-an-obj-in-slicer-and-see-its-name/22422 "2022-03-10T00:47:33Z")

</div>

LEt’s assume you are dealing with a huge number of objs and you want to see which one you are currently hovering over with your cursor… You would have to go and toggle on and off visibility of every single obj file to s…

---

## [About different versions of PRISM Rendering](https://discourse.slicer.org/t/about-different-versions-of-prism-rendering/22390)

<div class="topic-metadata">

**Author:** [@qiqi5210](https://discourse.slicer.org/u/qiqi5210)\
**Replies:** 1\
**Last updated:** [March 10, 2022, 12:14am UTC](https://discourse.slicer.org/t/about-different-versions-of-prism-rendering/22390 "2022-03-10T00:14:21Z")

</div>

Hello，everyone！ I have a problem using the PRISM Rendering in the software version 2022-02-05, as shown in the following figure I operate according to the sequence in the figure. When initializing the center, the vo…

---

## [Changing mouse modes from Python](https://discourse.slicer.org/t/changing-mouse-modes-from-python/22371)

<div class="topic-metadata">

**Author:** [@vanlangk](https://discourse.slicer.org/u/vanlangk)\
**Replies:** 4\
**Last updated:** [March 10, 2022, 12:08am UTC](https://discourse.slicer.org/t/changing-mouse-modes-from-python/22371 "2022-03-10T00:08:55Z")

</div>

Hello guys, I am new to Slicer and I am currently developing an extension. As part of this extension, I need to be able to switch between mouse interaction modes (e.g., ruler, fiducial, angle), from my Python script. Is …

---

## [Generating surface triangulation (mesh) based on sequence of segmentation](https://discourse.slicer.org/t/generating-surface-triangulation-mesh-based-on-sequence-of-segmentation/22324)

<div class="topic-metadata">

**Author:** [@BraveDistribution](https://discourse.slicer.org/u/BraveDistribution)\
**Replies:** 3\
**Last updated:** [March 10, 2022, 12:03am UTC](https://discourse.slicer.org/t/generating-surface-triangulation-mesh-based-on-sequence-of-segmentation/22324 "2022-03-10T00:03:30Z")

</div>

Hi all, I have a motion dataset tracking liver with segmentation available throughout the whole sequence. I’d like to generate a mesh from the first segmentation and then continuously deform it throughout the time. Of c…

---

## [Slicer translation workflow using crowdin](https://discourse.slicer.org/t/slicer-translation-workflow-using-crowdin/21601)

<div class="topic-metadata">

**Author:** [@lassoan](https://discourse.slicer.org/u/lassoan)\
**Replies:** 4\
**Last updated:** [March 9, 2022, 8:43pm UTC](https://discourse.slicer.org/t/slicer-translation-workflow-using-crowdin/21601 "2022-03-09T20:43:30Z")

</div>

During the project week we explored crowding and various options for implementing a translation workflow. I’ve read up on various documentations and see how other projects do this and tested a couple of approaches and ca…

---

## [1. Working directory, 2. Recording rotating 3D-reconstructions](https://discourse.slicer.org/t/1-working-directory-2-recording-rotating-3d-reconstructions/22418)

<div class="topic-metadata">

**Author:** [@Kim\_Geboers](https://discourse.slicer.org/u/Kim_Geboers)\
**Replies:** 3\
**Last updated:** [March 9, 2022, 8:31pm UTC](https://discourse.slicer.org/t/1-working-directory-2-recording-rotating-3d-reconstructions/22418 "2022-03-09T20:31:28Z")

</div>

Hi everyone, I have been using Slicer for a while and bought a new laptop, so I installed Slicer and We-transferred my data from my old laptop. The problem is, when I open the .mrml file, it is blank. When I add a worki…

---

## [Change series name](https://discourse.slicer.org/t/change-series-name/22406)

<div class="topic-metadata">

**Author:** [@TommyTurner](https://discourse.slicer.org/u/TommyTurner)\
**Replies:** 3\
**Last updated:** [March 9, 2022, 4:47pm UTC](https://discourse.slicer.org/t/change-series-name/22406 "2022-03-09T16:47:50Z")

</div>

Hello everyone ! I am a French student in biomechanical engineering and i am new to the DICOM images treatment field. I am using 3D Slicer for bone segmentation and I wanted to export some image series to ImageJ from Sli…

---

## [FSL transfer to nrrd have no output file](https://discourse.slicer.org/t/fsl-transfer-to-nrrd-have-no-output-file/22412)

<div class="topic-metadata">

**Author:** [@talelee](https://discourse.slicer.org/u/talelee)\
**Replies:** 0\
**Last updated:** [March 9, 2022, 2:51pm UTC](https://discourse.slicer.org/t/fsl-transfer-to-nrrd-have-no-output-file/22412 "2022-03-09T14:51:01Z")

</div>

The only hint in my dialog box Diffusion-weighted DICOM Import (DWIConvert) standard output: ======= DWI Convert Tool Program========= INPUT VOLUME: /home/lee/100417/data/data.nii.gz

---

## [download.slicer.org down?](https://discourse.slicer.org/t/download-slicer-org-down/22407)

<div class="topic-metadata">

**Author:** [@karischoonbee](https://discourse.slicer.org/u/karischoonbee)\
**Replies:** 1\
**Last updated:** [March 9, 2022, 1:44pm UTC](https://discourse.slicer.org/t/download-slicer-org-down/22407 "2022-03-09T13:44:28Z")

</div>

I’m unable to access download.slicer.org today and my old download I tried yesterday failed and keeps failing when I try to restart it. Are there any alternative download links? I’m looking for the latest stable OS X dmg…

---

## [MONAILabel / 3D Slicer for cloud computing workshop Jan 12, 2022, 2-4 EST](https://discourse.slicer.org/t/monailabel-3d-slicer-for-cloud-computing-workshop-jan-12-2022-2-4-est/21152)

<div class="topic-metadata">

**Author:** [@pieper](https://discourse.slicer.org/u/pieper)\
**Replies:** 6\
**Last updated:** [March 2, 2022, 6:53pm UTC](https://discourse.slicer.org/t/monailabel-3d-slicer-for-cloud-computing-workshop-jan-12-2022-2-4-est/21152 "2022-03-02T18:53:18Z")

</div>

To help prepare for the upcoming Project Week 36, experts from AWS and the MONAILabel community have offered to provide a workshop demonstrating medical imaging AI using 3D Slicer, MONAILabel, OHIF Viewer, and AWS servic…

---

## [What does a semi-landmark point without name mean? ](https://discourse.slicer.org/t/what-does-a-semi-landmark-point-without-name-mean/22375)

<div class="topic-metadata">

**Author:** [@yyl](https://discourse.slicer.org/u/yyl)\
**Replies:** 2\
**Last updated:** [March 9, 2022, 8:23am UTC](https://discourse.slicer.org/t/what-does-a-semi-landmark-point-without-name-mean/22375 "2022-03-09T08:23:26Z")

</div>

i have some questions,I’ll be appreciate if you help me out 1、in marksup module,i use resample to generate semi-landmark,but some of those have not names,does this mean anything special? 2、are pseudo-landmarks the same…

---

## [Slicer download page down](https://discourse.slicer.org/t/slicer-download-page-down/22397)

<div class="topic-metadata">

**Author:** [@mangotee](https://discourse.slicer.org/u/mangotee)\
**Replies:** 1\
**Last updated:** [March 9, 2022, 8:18am UTC](https://discourse.slicer.org/t/slicer-download-page-down/22397 "2022-03-09T08:18:57Z")

</div>

Hi all! The Slicer download page (https://download.slicer.org/) is currently down, not just for me (checked via https://downforeveryoneorjustme.com/). Hope it can be restored to its old glory soon! :slight\_smile:

---

## [Fiducials in Slicer-4.11. / 4.10 "R" and "A" flipped coordinates?](https://discourse.slicer.org/t/fiducials-in-slicer-4-11-4-10-r-and-a-flipped-coordinates/22342)

<div class="topic-metadata">

**Author:** [@CST](https://discourse.slicer.org/u/CST)\
**Replies:** 3\
**Last updated:** [March 9, 2022, 7:04am UTC](https://discourse.slicer.org/t/fiducials-in-slicer-4-11-4-10-r-and-a-flipped-coordinates/22342 "2022-03-09T07:04:02Z")

</div>

Dear all, I use Slicer to create Fiducials/annotate landmarks in nifti images for a project. I have multiple computers to work on. After annotating them on computer 1 with Slicer 4.11. I open them on computer 2 with Sli…

---

## [Including modules from external extension in my own custom extension](https://discourse.slicer.org/t/including-modules-from-external-extension-in-my-own-custom-extension/15732)

<div class="topic-metadata">

**Author:** [@DhruvKoolRajamani](https://discourse.slicer.org/u/DhruvKoolRajamani)\
**Replies:** 12\
**Last updated:** [March 9, 2022, 12:20am UTC](https://discourse.slicer.org/t/including-modules-from-external-extension-in-my-own-custom-extension/15732 "2022-03-09T00:20:11Z")

</div>

I’m working on creating a Slicer Extension that combines various modules available in slicer and the nvidia segmentation tool, all in one extension. I’m not sure how I can include the widgets and logic created by the nvi…

---

## [Unexpected behavior of curve resampling](https://discourse.slicer.org/t/unexpected-behavior-of-curve-resampling/22188)

<div class="topic-metadata">

**Author:** [@smrolfe](https://discourse.slicer.org/u/smrolfe)\
**Replies:** 7\
**Last updated:** [March 8, 2022, 11:52pm UTC](https://discourse.slicer.org/t/unexpected-behavior-of-curve-resampling/22188 "2022-03-08T23:52:09Z")

</div>

I used the “Resample” menu in the Markups module to resample a curve and constrain it to a surface model. Unlike in previous versions, the curve was not constrained to the surface, as seen below: If I set “Constrain …

---

## [Errors in Windows build of preview version](https://discourse.slicer.org/t/errors-in-windows-build-of-preview-version/22320)

<div class="topic-metadata">

**Author:** [@smrolfe](https://discourse.slicer.org/u/smrolfe)\
**Replies:** 3\
**Last updated:** [March 8, 2022, 11:42pm UTC](https://discourse.slicer.org/t/errors-in-windows-build-of-preview-version/22320 "2022-03-08T23:42:41Z")

</div>

I’m getting the following VTK-related errors while trying to build the Preview version of Slicer for Windows 10. I just updated to CMake 3.23.0-rc2, although I believe this should be fine? I’m not able to find the lib f…

---

## [Color bar in slice viewers](https://discourse.slicer.org/t/color-bar-in-slice-viewers/6291)

<div class="topic-metadata">

**Author:** [@fedorov](https://discourse.slicer.org/u/fedorov)\
**Replies:** 7\
**Last updated:** [March 8, 2022, 11:41pm UTC](https://discourse.slicer.org/t/color-bar-in-slice-viewers/6291 "2022-03-08T23:41:29Z")

</div>

I wanted to visualize color bar in slice views today, and I was reminded how difficult it is to find this functionality. I think the only reason I was able to find it is because I knew it was possible to do that, I know …

---

## [Couldn't find SlicerRadiomics](https://discourse.slicer.org/t/couldnt-find-slicerradiomics/22361)

<div class="topic-metadata">

**Author:** [@xackey](https://discourse.slicer.org/u/xackey)\
**Replies:** 2\
**Last updated:** [March 8, 2022, 10:07pm UTC](https://discourse.slicer.org/t/couldnt-find-slicerradiomics/22361 "2022-03-08T22:07:13Z")

</div>

I couldn’t find SlicerRadiomics in the extension manager of the latest 3D Slicer (preview release). Could you tell me how to install the extension?

---

## [Mailing list mode turned itself on?](https://discourse.slicer.org/t/mailing-list-mode-turned-itself-on/22367)

<div class="topic-metadata">

**Author:** [@dzenanz](https://discourse.slicer.org/u/dzenanz)\
**Replies:** 3\
**Last updated:** [March 8, 2022, 9:50pm UTC](https://discourse.slicer.org/t/mailing-list-mode-turned-itself-on/22367 "2022-03-08T21:50:16Z")

</div>

Yesterday, I started getting emails for each message on the forum. This morning I tried to explain it to myself. I thought I accidentally created a new account and new accounts had “mailing list mode” turned on by defaul…

[Previous page](https://discourse.slicer.org/latest.md?page=321)

[Next page](https://discourse.slicer.org/latest.md?page=323)
