# Latest

**URL:** https://discourse.slicer.org/latest.md?page=351

[Latest](https://discourse.slicer.org/latest.md) · [Categories](https://discourse.slicer.org/categories.md) · [Tags](https://discourse.slicer.org/tags.md)

**Page:** 352

---

## [“Notes” module?](https://discourse.slicer.org/t/notes-module/20455)

<div class="topic-metadata">

**Author:** [@hherhold](https://discourse.slicer.org/u/hherhold)\
**Replies:** 5\
**Last updated:** [November 2, 2021, 8:30pm UTC](https://discourse.slicer.org/t/notes-module/20455 "2021-11-02T20:30:11Z")

</div>

Would there be any interest in a general purpose “notes” module? I often wind up taking notes on a scan during segmenting, threshold ranges used for this (anatomical) feature or that, and so on. It seems like a quick and…

---

## [Segment Editor : Extra Effects — Watershed effect should not recompute upon change of colour](https://discourse.slicer.org/t/segment-editor-extra-effects-watershed-effect-should-not-recompute-upon-change-of-colour/20447)

<div class="topic-metadata">

**Author:** [@DIV](https://discourse.slicer.org/u/DIV)\
**Replies:** 3\
**Last updated:** [November 2, 2021, 8:26pm UTC](https://discourse.slicer.org/t/segment-editor-extra-effects-watershed-effect-should-not-recompute-upon-change-of-colour/20447 "2021-11-02T20:26:33Z")

</div>

The Watershed (extra) effect in the Segment Editor module appeared to recompute upon a change of a segment’s colour (aka “color”), or possibly it was the segment’s Property type. This seemed to happen automatically when…

---

## [Slicermarkupstomodel failing because of unauthenticated git protocol on port 9418 is no longer supported](https://discourse.slicer.org/t/slicermarkupstomodel-failing-because-of-unauthenticated-git-protocol-on-port-9418-is-no-longer-supported/20467)

<div class="topic-metadata">

**Author:** [@Shazam\_L](https://discourse.slicer.org/u/Shazam_L)\
**Replies:** 2\
**Last updated:** [November 2, 2021, 8:02pm UTC](https://discourse.slicer.org/t/slicermarkupstomodel-failing-because-of-unauthenticated-git-protocol-on-port-9418-is-no-longer-supported/20467 "2021-11-02T20:02:51Z")

</div>

Hello to whoever wants to help, I was building and got this error in the title. I was wondering how to solve this. Thanks, Shazam L

---

## [Exporting planned trajectories from Slicer to Stealth System](https://discourse.slicer.org/t/exporting-planned-trajectories-from-slicer-to-stealth-system/20458)

<div class="topic-metadata">

**Author:** [@punadkat13](https://discourse.slicer.org/u/punadkat13)\
**Replies:** 1\
**Last updated:** [November 2, 2021, 7:33pm UTC](https://discourse.slicer.org/t/exporting-planned-trajectories-from-slicer-to-stealth-system/20458 "2021-11-02T19:33:33Z")

</div>

Hello Everyone, I was wondering if anyone has an already established workflow to importing planned trajectories on 3D slicer to the Stealth Navigation system. Once I have my trajectories set using Path explorer what’s t…

---

## [Build failure on Mac using git:// protocol](https://discourse.slicer.org/t/build-failure-on-mac-using-git-protocol/20460)

<div class="topic-metadata">

**Author:** [@hherhold](https://discourse.slicer.org/u/hherhold)\
**Replies:** 4\
**Last updated:** [November 2, 2021, 6:54pm UTC](https://discourse.slicer.org/t/build-failure-on-mac-using-git-protocol/20460 "2021-11-02T18:54:40Z")

</div>

I haven’t built from scratch (clean) in a while, so apologies if this was mentioned elsewhere (didn’t see it in a quick search). It looks like as of Nov 2, the “brownout” of the git:// protocol is beginning. Cloning of …

---

## [macOS build #error "Unknown architecture !" associated with DynamicModeler/Logic/FastMarching](https://discourse.slicer.org/t/macos-build-error-unknown-architecture-associated-with-dynamicmodeler-logic-fastmarching/20463)

<div class="topic-metadata">

**Author:** [@hherhold](https://discourse.slicer.org/u/hherhold)\
**Replies:** 4\
**Last updated:** [November 2, 2021, 6:48pm UTC](https://discourse.slicer.org/t/macos-build-error-unknown-architecture-associated-with-dynamicmodeler-logic-fastmarching/20463 "2021-11-02T18:48:56Z")

</div>

I get as far as: In file included from /opt/SB/debug/SurfaceToolbox/DynamicModeler/Logic/FastMarching/gw\_core/../gw\_maths/GW\_Maths.h:13: /opt/SB/debug/SurfaceToolbox/DynamicModeler/Logic/FastMarching/gw\_core/../gw\_maths…

---

## [Problem loading VolDICOM](https://discourse.slicer.org/t/problem-loading-voldicom/18640)

<div class="topic-metadata">

**Author:** [@TKhienwad](https://discourse.slicer.org/u/TKhienwad)\
**Replies:** 14\
**Last updated:** [November 2, 2021, 2:04pm UTC](https://discourse.slicer.org/t/problem-loading-voldicom/18640 "2021-11-02T14:04:48Z")

</div>

Hi all, I have a question regarding importing the VolDICOM format from echo images with 3D slicer. Does anyone know how to do that? Best,

---

## [2021.11.02 Weekly Meeting](https://discourse.slicer.org/t/2021-11-02-weekly-meeting/20436)

<div class="topic-metadata">

**Author:** [@rbumm](https://discourse.slicer.org/u/rbumm)\
**Replies:** 5\
**Last updated:** [November 2, 2021, 1:45pm UTC](https://discourse.slicer.org/t/2021-11-02-weekly-meeting/20436 "2021-11-02T13:45:37Z")

</div>

Hello, I am planning to attend tomorrow to discuss the topic of “Add intuitive volume presets” as referenced here which resulted in a PR here.

---

## [Multiple sessions of Slicer are launched in a loop](https://discourse.slicer.org/t/multiple-sessions-of-slicer-are-launched-in-a-loop/20454)

<div class="topic-metadata">

**Author:** [@lb123](https://discourse.slicer.org/u/lb123)\
**Replies:** 1\
**Last updated:** [November 2, 2021, 12:39pm UTC](https://discourse.slicer.org/t/multiple-sessions-of-slicer-are-launched-in-a-loop/20454 "2021-11-02T12:39:08Z")

</div>

Hi, I built Slicer 4.13.0 in Ubuntu 20.04.3 LTS. It worked properly and I was able to use Slicer. Then I built SlicerIGT following these steps: $ git clone https://github.com/SlicerIGT/SlicerIGT.git $ mkdir SlicerIGT-…

---

## [Dicom segmentation object Q/R](https://discourse.slicer.org/t/dicom-segmentation-object-q-r/12762)

<div class="topic-metadata">

**Author:** [@Krishna\_Nanda](https://discourse.slicer.org/u/Krishna_Nanda)\
**Replies:** 2\
**Last updated:** [November 2, 2021, 12:22pm UTC](https://discourse.slicer.org/t/dicom-segmentation-object-q-r/12762 "2021-11-02T12:22:52Z")

</div>

Hello, We have setup the 3D Slicer dicom browser to be able to Q/R into a vendor software. The query shows all the series, including a dicom segmentation object (modality SEG). The retrieve is successful in pulling all …

---

## [Segment statistics for each slice of segmented volume](https://discourse.slicer.org/t/segment-statistics-for-each-slice-of-segmented-volume/20421)

<div class="topic-metadata">

**Author:** [@Michel\_Atieh](https://discourse.slicer.org/u/Michel_Atieh)\
**Replies:** 9\
**Last updated:** [November 1, 2021, 9:07pm UTC](https://discourse.slicer.org/t/segment-statistics-for-each-slice-of-segmented-volume/20421 "2021-11-01T21:07:05Z")

</div>

Hello, to calculate the radiation dose received by the fetus during a CT exam, I need to know the mean Hounsfield Unit for each slice of my segmented volume (the uterus). However, I am only able to obtain statistics for…

---

## [veterinary dog bone model](https://discourse.slicer.org/t/veterinary-dog-bone-model/20432)

<div class="topic-metadata">

**Author:** [@rameshvet2000](https://discourse.slicer.org/u/rameshvet2000)\
**Replies:** 1\
**Last updated:** [November 1, 2021, 8:50pm UTC](https://discourse.slicer.org/t/veterinary-dog-bone-model/20432 "2021-11-01T20:50:11Z")

</div>

veterinary dog bone model creation from dicom file from ct scan

---

## [Image after registration doesn't have the same dimension of the fixed image](https://discourse.slicer.org/t/image-after-registration-doesnt-have-the-same-dimension-of-the-fixed-image/20442)

<div class="topic-metadata">

**Author:** [@S\_Arbabi](https://discourse.slicer.org/u/S_Arbabi)\
**Replies:** 2\
**Last updated:** [November 1, 2021, 8:40pm UTC](https://discourse.slicer.org/t/image-after-registration-doesnt-have-the-same-dimension-of-the-fixed-image/20442 "2021-11-01T20:40:21Z")

</div>

Hi, I’m going to register a moving image to a fixed image and save the registered in a file. I load the two images in two nodes, do the registration (Elastix), and then call the SetAndObserveTransformNodeID on moving i…

---

## [Calculating Second Moment of Area from Segment](https://discourse.slicer.org/t/calculating-second-moment-of-area-from-segment/16459)

<div class="topic-metadata">

**Author:** [@jmhuie](https://discourse.slicer.org/u/jmhuie)\
**Replies:** 4\
**Last updated:** [November 1, 2021, 7:36pm UTC](https://discourse.slicer.org/t/calculating-second-moment-of-area-from-segment/16459 "2021-11-01T19:36:51Z")

</div>

In the SlicerMorph workshop yesterday, @muratmaga and I briefly talked about the steps needed to measure second moment of area from a long bone image stack/volume. Currently I do this using ImageJ with BoneJ, but it’d be…

---

## [Team needed to develop a Magnetic Ressonance segmentation of the spinal column](https://discourse.slicer.org/t/team-needed-to-develop-a-magnetic-ressonance-segmentation-of-the-spinal-column/20189)

<div class="topic-metadata">

**Author:** [@Ricardoneuro](https://discourse.slicer.org/u/Ricardoneuro)\
**Replies:** 4\
**Last updated:** [October 31, 2021, 8:13pm UTC](https://discourse.slicer.org/t/team-needed-to-develop-a-magnetic-ressonance-segmentation-of-the-spinal-column/20189 "2021-10-31T20:13:49Z")

</div>

I have been using a very efficient column volumetric magnetic resonance protocol for the past 5 years. I’m looking for a group of people interested in a segmentation protocol that can extract and segment bone tissue from…

---

## [Perform gamma analysis with slicerRT using python scripting](https://discourse.slicer.org/t/perform-gamma-analysis-with-slicerrt-using-python-scripting/20423)

<div class="topic-metadata">

**Author:** [@Cedric\_Belanger](https://discourse.slicer.org/u/Cedric_Belanger)\
**Replies:** 1\
**Last updated:** [October 31, 2021, 12:32pm UTC](https://discourse.slicer.org/t/perform-gamma-analysis-with-slicerrt-using-python-scripting/20423 "2021-10-31T12:32:15Z")

</div>

Hello, I am quite new to the slicer community. I would like to know how to perform a 3D gamma analysis using python scripting with slicerRT dose comparison tool. Are there any tutorials on this? Any insights would be m…

---

## [Can’t cut away unwanted tissue](https://discourse.slicer.org/t/can-t-cut-away-unwanted-tissue/20417)

<div class="topic-metadata">

**Author:** [@mdear](https://discourse.slicer.org/u/mdear)\
**Replies:** 2\
**Last updated:** [October 30, 2021, 11:51pm UTC](https://discourse.slicer.org/t/can-t-cut-away-unwanted-tissue/20417 "2021-10-30T23:51:51Z")

</div>

Newbie question. I pull in DICOM data, go to data module and drag the data series into the 3D window. I then go to the segmentation editor and select threshold tool and select all voxels. I then select the box to allow …

---

## [Perfusion MRI-3DSlicer](https://discourse.slicer.org/t/perfusion-mri-3dslicer/17790)

<div class="topic-metadata">

**Author:** [@SantosCNEURO](https://discourse.slicer.org/u/SantosCNEURO)\
**Replies:** 3\
**Last updated:** [October 30, 2021, 11:27pm UTC](https://discourse.slicer.org/t/perfusion-mri-3dslicer/17790 "2021-10-30T23:27:37Z")

</div>

Hi everyone, my name is Yusniel Santos Rodríguez, I am a Cuban neuroscientist and currently I work on issues related to the pre-surgical planning of brain tumors. Recently i have turned my attention to MRI perfusion imag…

---

## [How to update Slicer's Python version from 3.6.7 to 3.7?](https://discourse.slicer.org/t/how-to-update-slicers-python-version-from-3-6-7-to-3-7/20409)

<div class="topic-metadata">

**Author:** [@andieku](https://discourse.slicer.org/u/andieku)\
**Replies:** 3\
**Last updated:** [October 29, 2021, 10:39pm UTC](https://discourse.slicer.org/t/how-to-update-slicers-python-version-from-3-6-7-to-3-7/20409 "2021-10-29T22:39:52Z")

</div>

Hi, is there a way to upgrade my Slicer’s (v. 4.11) Python version from 3.6.7 to 3.7 (or newer) without updating the slicer itself? I would like to use skimage’s skimage.segmentation.expand\_labels() function and it requi…

---

## [Sandbox extension needed for mandible reconstruction extension and it is not available](https://discourse.slicer.org/t/sandbox-extension-needed-for-mandible-reconstruction-extension-and-it-is-not-available/20413)

<div class="topic-metadata">

**Author:** [@mau\_igna\_06](https://discourse.slicer.org/u/mau_igna_06)\
**Replies:** 5\
**Last updated:** [October 29, 2021, 10:18pm UTC](https://discourse.slicer.org/t/sandbox-extension-needed-for-mandible-reconstruction-extension-and-it-is-not-available/20413 "2021-10-29T22:18:23Z")

</div>

Hi. Users are telling me that they cannot finish surgical planning because they cannot make boolean operations because the CombineModels module is not found, because the extension manager cannot install Sandbox extension…

---

## [How to update Python version from 3.67 to 3.8](https://discourse.slicer.org/t/how-to-update-python-version-from-3-67-to-3-8/16650)

<div class="topic-metadata">

**Author:** [@full\_stack\_master](https://discourse.slicer.org/u/full_stack_master)\
**Replies:** 4\
**Last updated:** [October 29, 2021, 3:55pm UTC](https://discourse.slicer.org/t/how-to-update-python-version-from-3-67-to-3-8/16650 "2021-10-29T15:55:45Z")

</div>

I want to update My slicer’s Python version from 3.6.7 to 3.8 because I am going to use Torch package As you know, this package is working on Python 3.8 Can you help me?

---

## [Segment comparison module (Dice and Hausdorff) - but with markup points](https://discourse.slicer.org/t/segment-comparison-module-dice-and-hausdorff-but-with-markup-points/20358)

<div class="topic-metadata">

**Author:** [@mk.kassai](https://discourse.slicer.org/u/mk.kassai)\
**Replies:** 3\
**Last updated:** [October 29, 2021, 2:14pm UTC](https://discourse.slicer.org/t/segment-comparison-module-dice-and-hausdorff-but-with-markup-points/20358 "2021-10-29T14:14:33Z")

</div>

Hi, I want to evaluate segmentation by comparing them to markup points. I would be interested in the Dice metrics; however, the only module I found with Dice is the segment comparison which works only with segments. I…

---

## [How to run MS Lesion Simulator module ?](https://discourse.slicer.org/t/how-to-run-ms-lesion-simulator-module/20335)

<div class="topic-metadata">

**Author:** [@MouSah](https://discourse.slicer.org/u/MouSah)\
**Replies:** 5\
**Last updated:** [October 29, 2021, 12:20pm UTC](https://discourse.slicer.org/t/how-to-run-ms-lesion-simulator-module/20335 "2021-10-29T12:20:21Z")

</div>

Operating system: Windows Slicer version: 3D Slicer 4.5.0-1 Expected behavior: Actual behavior: I didn’t found the MS Lesion Simulator module in my 3D installed slicer. May be this is due to the slicer version. Could…

---

## [Volume with negative spacing turns in strange behaviour (bug?)](https://discourse.slicer.org/t/volume-with-negative-spacing-turns-in-strange-behaviour-bug/20408)

<div class="topic-metadata">

**Author:** [@keri](https://discourse.slicer.org/u/keri)\
**Replies:** 7\
**Last updated:** [October 29, 2021, 11:54am UTC](https://discourse.slicer.org/t/volume-with-negative-spacing-turns-in-strange-behaviour-bug/20408 "2021-10-29T11:54:43Z")

</div>

Hi, When I try to add volume with negative spacing in X direction to Slicer I get strange behavior. For example here is the python code to generate volume and add it to the Slicer (based on example in script repo): no…

---

## [How to distinguish between translation, scaling and reduction by DIR](https://discourse.slicer.org/t/how-to-distinguish-between-translation-scaling-and-reduction-by-dir/20412)

<div class="topic-metadata">

**Author:** [@toyama](https://discourse.slicer.org/u/toyama)\
**Replies:** 0\
**Last updated:** [October 29, 2021, 10:59am UTC](https://discourse.slicer.org/t/how-to-distinguish-between-translation-scaling-and-reduction-by-dir/20412 "2021-10-29T10:59:30Z")

</div>

I want to distinguish between translation, enlargement, and reduction by DIR for each contour. When I asked about this before, I was told that there is a tool called bounding box that can be used to determine scaling, a…

---

## [Labelmap volume rendering preset (default) is not available from preset dropdown](https://discourse.slicer.org/t/labelmap-volume-rendering-preset-default-is-not-available-from-preset-dropdown/20375)

<div class="topic-metadata">

**Author:** [@DIV](https://discourse.slicer.org/u/DIV)\
**Replies:** 8\
**Last updated:** [October 29, 2021, 4:52am UTC](https://discourse.slicer.org/t/labelmap-volume-rendering-preset-default-is-not-available-from-preset-dropdown/20375 "2021-10-29T04:52:10Z")

</div>

If I create a volume from the Simple Region Growing Segmentation module, then I suppose it is a binary labelmap. It can be viewed in 3D through the Volume Rendering module. By default this comes up with a kind of colo…

---

## [New physician-annotated .dcm files not loading](https://discourse.slicer.org/t/new-physician-annotated-dcm-files-not-loading/20359)

<div class="topic-metadata">

**Author:** [@BoneArtist](https://discourse.slicer.org/u/BoneArtist)\
**Replies:** 3\
**Last updated:** [October 29, 2021, 2:11am UTC](https://discourse.slicer.org/t/new-physician-annotated-dcm-files-not-loading/20359 "2021-10-29T02:11:25Z")

</div>

The original .dcm files work fine, but my client recently annotated new versions of the study with color demarcations. Although these new versions are also .dcm files, they will not load as a scalar volume. The original…

---

## [Text node: new lines not restored](https://discourse.slicer.org/t/text-node-new-lines-not-restored/20404)

<div class="topic-metadata">

**Author:** [@chir.set](https://discourse.slicer.org/u/chir.set)\
**Replies:** 1\
**Last updated:** [October 29, 2021, 12:34am UTC](https://discourse.slicer.org/t/text-node-new-lines-not-restored/20404 "2021-10-29T00:34:06Z")

</div>

New lines are not restored when opening a saved scene. If the scene project file has the following : \<Text id="vtkMRMLTextNode2" name="Text\_1" hideFromEditors="false" selectable="true" selected="false" userTags="" te…

---

## [Error Using nVIDIA AIAA - Prostate Model ](https://discourse.slicer.org/t/error-using-nvidia-aiaa-prostate-model/20367)

<div class="topic-metadata">

**Author:** [@mario.boccia1992](https://discourse.slicer.org/u/mario.boccia1992)\
**Replies:** 2\
**Last updated:** [October 28, 2021, 12:31pm UTC](https://discourse.slicer.org/t/error-using-nvidia-aiaa-prostate-model/20367 "2021-10-28T12:31:17Z")

</div>

Dear all, Unfortunately I’m facing issue using nVIDIA AIAA module: prostate MRI segmentation. Running the AI I get this error: " Traceback (most recent call last): File “C:/Users/M/AppData/Local/NA-MIC/Slicer 4.11.20…

---

## [Build Plus Toolkit in Ubuntu 20.04.3 LTS](https://discourse.slicer.org/t/build-plus-toolkit-in-ubuntu-20-04-3-lts/20389)

<div class="topic-metadata">

**Author:** [@lb123](https://discourse.slicer.org/u/lb123)\
**Replies:** 1\
**Last updated:** [October 28, 2021, 2:05am UTC](https://discourse.slicer.org/t/build-plus-toolkit-in-ubuntu-20-04-3-lts/20389 "2021-10-28T02:05:48Z")

</div>

Hi, I’m trying to build Plus Toolkit 2.8 in Ubuntu 20.04.3 LTS. I have followed the information of this page PlusBuild/BuildInstructionsLinux.md at master · PlusToolkit/PlusBuild · GitHub The only thing I did in a dif…

[Previous page](https://discourse.slicer.org/latest.md?page=350)

[Next page](https://discourse.slicer.org/latest.md?page=352)
