# Latest

**URL:** https://discourse.slicer.org/latest.md?page=399

[Latest](https://discourse.slicer.org/latest.md) · [Categories](https://discourse.slicer.org/categories.md) · [Tags](https://discourse.slicer.org/tags.md)

**Page:** 400

---

## [creating mesh surface or volume (vtk, vtp) from binary images ](https://discourse.slicer.org/t/creating-mesh-surface-or-volume-vtk-vtp-from-binary-images/17324)

<div class="topic-metadata">

**Author:** [@parvaneh.a](https://discourse.slicer.org/u/parvaneh.a)\
**Replies:** 11\
**Last updated:** [April 27, 2021, 1:33am UTC](https://discourse.slicer.org/t/creating-mesh-surface-or-volume-vtk-vtp-from-binary-images/17324 "2021-04-27T01:33:44Z")

</div>

Operating system: macos Slicer version:4.13 Expected behavior: change nii segmentation to .vtk Actual behavior: the vtk format is not available for export mesh I have a binary 3d nii image and I am trying to make a m…

---

## [Autosave option](https://discourse.slicer.org/t/autosave-option/17025)

<div class="topic-metadata">

**Author:** [@aldoSanchez](https://discourse.slicer.org/u/aldoSanchez)\
**Replies:** 5\
**Last updated:** [April 27, 2021, 1:25am UTC](https://discourse.slicer.org/t/autosave-option/17025 "2021-04-27T01:25:15Z")

</div>

hi guys I’m wondering if slicer haves autosave? its anyone that can guide me pleas or maybe use some python code for autosave

---

## [Trying to create custom DTI volume](https://discourse.slicer.org/t/trying-to-create-custom-dti-volume/17318)

<div class="topic-metadata">

**Author:** [@haz\_lanz](https://discourse.slicer.org/u/haz_lanz)\
**Replies:** 3\
**Last updated:** [April 26, 2021, 11:26pm UTC](https://discourse.slicer.org/t/trying-to-create-custom-dti-volume/17318 "2021-04-26T23:26:51Z")

</div>

Hello, I am trying to use the diffusion tractography capabilities of 3DSlicer to visualise some data I have collected from my PhD research. It is similar to diffusion weighted MRI but does not produce diffusion weighted…

---

## [Can 3D slicer reach transparency in volume rendering like syngo do?](https://discourse.slicer.org/t/can-3d-slicer-reach-transparency-in-volume-rendering-like-syngo-do/17329)

<div class="topic-metadata">

**Author:** [@chendong9416](https://discourse.slicer.org/u/chendong9416)\
**Replies:** 5\
**Last updated:** [April 26, 2021, 11:00pm UTC](https://discourse.slicer.org/t/can-3d-slicer-reach-transparency-in-volume-rendering-like-syngo-do/17329 "2021-04-26T23:00:09Z")

</div>

it is crucial for vascular surgeon to confirm the position of intimal tear in aortic dissection even in low quality CTA

---

## [Elastix AND Python Scripting](https://discourse.slicer.org/t/elastix-and-python-scripting/15923)

<div class="topic-metadata">

**Author:** [@HodaGH](https://discourse.slicer.org/u/HodaGH)\
**Replies:** 3\
**Last updated:** [April 26, 2021, 10:23pm UTC](https://discourse.slicer.org/t/elastix-and-python-scripting/15923 "2021-04-26T22:23:36Z")

</div>

Hi all, I want to perform groupwise registration as described here https://simpleelastix.readthedocs.io/GroupwiseRegistration.html with python scripting. Should I build Elastix from scratch or is there a way to do it wi…

---

## [Merge CAD file with segmentation](https://discourse.slicer.org/t/merge-cad-file-with-segmentation/17338)

<div class="topic-metadata">

**Author:** [@Hamid](https://discourse.slicer.org/u/Hamid)\
**Replies:** 0\
**Last updated:** [April 26, 2021, 3:30pm UTC](https://discourse.slicer.org/t/merge-cad-file-with-segmentation/17338 "2021-04-26T15:30:50Z")

</div>

Hi, I want to import the .stl or part format file from solidworks and then connect it to my lumen and finally merge them as a one .stl file. Is it possible to do? if so could you please help me with that and show me the…

---

## [Why the the tool of scissor become slower after I undated my computer?](https://discourse.slicer.org/t/why-the-the-tool-of-scissor-become-slower-after-i-undated-my-computer/10887)

<div class="topic-metadata">

**Author:** [@researchtomliu](https://discourse.slicer.org/u/researchtomliu)\
**Replies:** 14\
**Last updated:** [April 26, 2021, 8:20pm UTC](https://discourse.slicer.org/t/why-the-the-tool-of-scissor-become-slower-after-i-undated-my-computer/10887 "2021-04-26T20:20:25Z")

</div>

I have updated my computer to make the 3D-Slicer run faster. The new CPU is AMD 2950X and the GPU is RTX 2080Ti. But when I performed the software to deal with the DICOM data, I found that running of scissor tool in the …

---

## [Relocation of factory-south-macos build build machine (April 26th, 2021)](https://discourse.slicer.org/t/relocation-of-factory-south-macos-build-build-machine-april-26th-2021/17336)

<div class="topic-metadata">

**Author:** [@jcfr](https://discourse.slicer.org/u/jcfr)\
**Replies:** 3\
**Last updated:** [April 26, 2021, 6:35pm UTC](https://discourse.slicer.org/t/relocation-of-factory-south-macos-build-build-machine-april-26th-2021/17336 "2021-04-26T18:35:03Z")

</div>

The build machine factory-south-macos.kitware will be relocated to a different room this afternoon, disruption of macOS build for remaining nightly extension builds should be expected.

---

## [Elastix registration error](https://discourse.slicer.org/t/elastix-registration-error/17335)

<div class="topic-metadata">

**Author:** [@Bence\_Horvath](https://discourse.slicer.org/u/Bence_Horvath)\
**Replies:** 4\
**Last updated:** [April 26, 2021, 4:58pm UTC](https://discourse.slicer.org/t/elastix-registration-error/17335 "2021-04-26T16:58:21Z")

</div>

Hi, I want to registrate preoperative CT with postoperative CT , but Elastix always give me this error, when try to generate output: Failed to load output transform from C:/Users/HORVIR~1/AppData/Local/Temp/Slicer/E…

---

## [Copy contour to adjacent slices](https://discourse.slicer.org/t/copy-contour-to-adjacent-slices/17239)

<div class="topic-metadata">

**Author:** [@ferhue](https://discourse.slicer.org/u/ferhue)\
**Replies:** 3\
**Last updated:** [April 26, 2021, 1:54pm UTC](https://discourse.slicer.org/t/copy-contour-to-adjacent-slices/17239 "2021-04-26T13:54:45Z")

</div>

Hello, I was wondering what is the best way to exactly copy a contour from one slice to the adjacent one. I would find such a plugin or feature useful when I am designing 3D printed supports for phantoms. This would al…

---

## [Using other Qt modules in loadable extension](https://discourse.slicer.org/t/using-other-qt-modules-in-loadable-extension/17250)

<div class="topic-metadata">

**Author:** [@LorenzE](https://discourse.slicer.org/u/LorenzE)\
**Replies:** 2\
**Last updated:** [April 26, 2021, 12:43pm UTC](https://discourse.slicer.org/t/using-other-qt-modules-in-loadable-extension/17250 "2021-04-26T12:43:51Z")

</div>

I am trying to include the QtConcurrent module into my loadable extension. So far I tried to set find\_package(Qt5 COMPONENTS Concurrent REQUIRED) in my module’s CMakeLists file. I know that Slicer does not use this modul…

---

## [Segmentation visible only in 3D](https://discourse.slicer.org/t/segmentation-visible-only-in-3d/5530)

<div class="topic-metadata">

**Author:** [@David\_M](https://discourse.slicer.org/u/David_M)\
**Replies:** 26\
**Last updated:** [April 26, 2021, 12:28pm UTC](https://discourse.slicer.org/t/segmentation-visible-only-in-3d/5530 "2021-04-26T12:28:54Z")

</div>

Operating system: Windows 10 Slicer version:4.10.1 (tried also with 4.10.0) Expected behavior: see segmentation in 2D Actual behavior: can see only in 3D! Hi please help me. Unfortunately, the software does not s…

---

## [Data is not in center of slicer views after JumpSlicesToLocation process](https://discourse.slicer.org/t/data-is-not-in-center-of-slicer-views-after-jumpslicestolocation-process/17252)

<div class="topic-metadata">

**Author:** [@luxiaoyang9999](https://discourse.slicer.org/u/luxiaoyang9999)\
**Replies:** 4\
**Last updated:** [April 26, 2021, 4:25am UTC](https://discourse.slicer.org/t/data-is-not-in-center-of-slicer-views-after-jumpslicestolocation-process/17252 "2021-04-26T04:25:35Z")

</div>

Hi all I use the JumpSlicesToLocation to change data in slicer view when mouse position changed, but images in slicer view will not be in view center, how can I solve the problm, this is my code def jumpToCursor(self):…

---

## [Volume mesh with uniform element size](https://discourse.slicer.org/t/volume-mesh-with-uniform-element-size/17319)

<div class="topic-metadata">

**Author:** [@michxu98](https://discourse.slicer.org/u/michxu98)\
**Replies:** 1\
**Last updated:** [April 26, 2021, 1:45am UTC](https://discourse.slicer.org/t/volume-mesh-with-uniform-element-size/17319 "2021-04-26T01:45:05Z")

</div>

Hello, I am trying to generate a volume mesh with uniform element size from a segmentation using Cleaver in the Segment Mesher module, however the output mesh does not seem to have uniform element sizes: Slicer vers…

---

## [3D Slicer and Antikythera Mechanism, A new publication](https://discourse.slicer.org/t/3d-slicer-and-antikythera-mechanism-a-new-publication/17316)

<div class="topic-metadata">

**Author:** [@Icarus](https://discourse.slicer.org/u/Icarus)\
**Replies:** 0\
**Last updated:** [April 25, 2021, 10:43pm UTC](https://discourse.slicer.org/t/3d-slicer-and-antikythera-mechanism-a-new-publication/17316 "2021-04-25T22:43:16Z")

</div>

Our sixth publication of our team The Functional Reconstruction of Antikythera Mechanism-The FRAMe Project , which just published in the Mediterranean Archaeology and Archaeometry Journal . Our paper entitled " Renumbe…

---

## [Could not find WebEngineProcess.exe](https://discourse.slicer.org/t/could-not-find-webengineprocess-exe/17035)

<div class="topic-metadata">

**Author:** [@wujie](https://discourse.slicer.org/u/wujie)\
**Replies:** 12\
**Last updated:** [April 25, 2021, 9:56pm UTC](https://discourse.slicer.org/t/could-not-find-webengineprocess-exe/17035 "2021-04-25T21:56:27Z")

</div>

when I debug the Slicer programe,and run the extension manager,make a error “Could not find QtWebEngineProcess.exe”，how can I address it?

---

## [Crash when right-click changing markup point name - 4/15 nightly](https://discourse.slicer.org/t/crash-when-right-click-changing-markup-point-name-4-15-nightly/17312)

<div class="topic-metadata">

**Author:** [@hherhold](https://discourse.slicer.org/u/hherhold)\
**Replies:** 4\
**Last updated:** [April 25, 2021, 6:43pm UTC](https://discourse.slicer.org/t/crash-when-right-click-changing-markup-point-name-4-15-nightly/17312 "2021-04-25T18:43:03Z")

</div>

MacOS 10.15.7. This is an annoyingly intermittent crash. Sometimes when I right-click on a markup point to change the name, after modifying the name and hitting OK, Slicer seg faults. I’m guessing the best course of ac…

---

## [Delete or inactivated some images](https://discourse.slicer.org/t/delete-or-inactivated-some-images/17291)

<div class="topic-metadata">

**Author:** [@Valentina\_Mejia\_Gall](https://discourse.slicer.org/u/Valentina_Mejia_Gall)\
**Replies:** 1\
**Last updated:** [April 25, 2021, 2:08pm UTC](https://discourse.slicer.org/t/delete-or-inactivated-some-images/17291 "2021-04-25T14:08:35Z")

</div>

Hello!, i’m working in a project where we have to reconstruct the same bone but we are changing the number or slices we’re using. Achieving this with a CT scan with about 30000 images, so we want to make the same recon…

---

## [Showing Arteries](https://discourse.slicer.org/t/showing-arteries/17288)

<div class="topic-metadata">

**Author:** [@IzzyRobb](https://discourse.slicer.org/u/IzzyRobb)\
**Replies:** 2\
**Last updated:** [April 25, 2021, 2:01pm UTC](https://discourse.slicer.org/t/showing-arteries/17288 "2021-04-25T14:01:05Z")

</div>

I’m trying to locate the Circle of Willis within a brain scan (just using sample data for now) but am finding it hard to segment the arteries from the rest of the scan. Is there a specific module or method to use to show…

---

## [Want to make this vtkMRMLSegmentEditorNode::PaintAllowedOutsideAllLockedSegments](https://discourse.slicer.org/t/want-to-make-this-vtkmrmlsegmenteditornode-paintallowedoutsidealllockedsegments/17292)

<div class="topic-metadata">

**Author:** [@Shazam\_L](https://discourse.slicer.org/u/Shazam_L)\
**Replies:** 1\
**Last updated:** [April 25, 2021, 1:35pm UTC](https://discourse.slicer.org/t/want-to-make-this-vtkmrmlsegmenteditornode-paintallowedoutsidealllockedsegments/17292 "2021-04-25T13:35:44Z")

</div>

Hello, I want to pass individual segments that cannot be painted over. Where can I access the segmentation mask so I can specify which segments can be painted over? Thanks, Harsh

---

## [Skull sutures in CT](https://discourse.slicer.org/t/skull-sutures-in-ct/12875)

<div class="topic-metadata">

**Author:** [@Mohamed\_Attia](https://discourse.slicer.org/u/Mohamed_Attia)\
**Replies:** 7\
**Last updated:** [April 25, 2021, 1:27pm UTC](https://discourse.slicer.org/t/skull-sutures-in-ct/12875 "2021-04-25T13:27:54Z")

</div>

Hello everyone, I am new to 3D slicer. I am working on a research project that needs to extract the skull sutures. I was able to used manually to approximate them. I used “shift” to make the sutures more evident. I was …

---

## [Problems with 3D slicer 4.11](https://discourse.slicer.org/t/problems-with-3d-slicer-4-11/17301)

<div class="topic-metadata">

**Author:** [@aseman](https://discourse.slicer.org/u/aseman)\
**Replies:** 1\
**Last updated:** [April 25, 2021, 1:16pm UTC](https://discourse.slicer.org/t/problems-with-3d-slicer-4-11/17301 "2021-04-25T13:16:57Z")

</div>

Slicer version:4.11 Hi 3D slicer experts and all I want to use 3D slicer 4.11, but when I load RT plan , its error is: could not loud RT PLAN as a RT. Also, when I want to install new extensions such as “Longitudinal…

---

## [2D fetal ultrasound to 3D print](https://discourse.slicer.org/t/2d-fetal-ultrasound-to-3d-print/17307)

<div class="topic-metadata">

**Author:** [@pengkelly](https://discourse.slicer.org/u/pengkelly)\
**Replies:** 0\
**Last updated:** [April 25, 2021, 1:02pm UTC](https://discourse.slicer.org/t/2d-fetal-ultrasound-to-3d-print/17307 "2021-04-25T13:02:26Z")

</div>

Hi everyone, I’m a newbie to this forum and I’m interested in turning 2D fetal ultrasound volume into 3D STL file. The machine I use is Hitachi arietta 70 and I’ve attached the exported volume file below. I really don’t…

---

## [R6034 Error using 3dSlicer](https://discourse.slicer.org/t/r6034-error-using-3dslicer/17300)

<div class="topic-metadata">

**Author:** [@MarioGQ](https://discourse.slicer.org/u/MarioGQ)\
**Replies:** 0\
**Last updated:** [April 24, 2021, 11:00pm UTC](https://discourse.slicer.org/t/r6034-error-using-3dslicer/17300 "2021-04-24T23:00:51Z")

</div>

Hi everyone. I am having trouble trying to use 3D Slicer to work with pyradiomics, specifically i get the Runtime Error R6034 (An application has made attemp to load the C runtime library incorrectly. Please contact the …

---

## [University of Minnesota banned from contributing to Linux kernel](https://discourse.slicer.org/t/university-of-minnesota-banned-from-contributing-to-linux-kernel/17290)

<div class="topic-metadata">

**Author:** [@manjula](https://discourse.slicer.org/u/manjula)\
**Replies:** 2\
**Last updated:** [April 24, 2021, 3:06pm UTC](https://discourse.slicer.org/t/university-of-minnesota-banned-from-contributing-to-linux-kernel/17290 "2021-04-24T15:06:10Z")

</div>

I hope no one willfully and unethically experimenting and submitting deliberate bugs that render false results, at least in the Slicer-Core which will make our research publications useless. https://cse.umn.edu/cs/state…

---

## [segmentation issues ](https://discourse.slicer.org/t/segmentation-issues/17297)

<div class="topic-metadata">

**Author:** [@ensieh](https://discourse.slicer.org/u/ensieh)\
**Replies:** 0\
**Last updated:** [April 24, 2021, 1:23pm UTC](https://discourse.slicer.org/t/segmentation-issues/17297 "2021-04-24T13:23:21Z")

</div>

Hi, I am going to segment my STL file which I have segmented in axial view and smoothed it, i coronal view. but the lines appear and the smooshing is disappeared. As in the attached video. how can I fix it? thank you. …

---

## [What finite element systems do you use with Slicer?](https://discourse.slicer.org/t/what-finite-element-systems-do-you-use-with-slicer/17278)

<div class="topic-metadata">

**Author:** [@pieper](https://discourse.slicer.org/u/pieper)\
**Replies:** 4\
**Last updated:** [April 23, 2021, 10:07pm UTC](https://discourse.slicer.org/t/what-finite-element-systems-do-you-use-with-slicer/17278 "2021-04-23T22:07:21Z")

</div>

Hi - We are doing large deformation mechanical simulation project that currently uses matlab and comsol and would like to switch to something more Slicer-like (free, python-based, extendable, etc). What packages have p…

---

## [ADC values on a DWI scan](https://discourse.slicer.org/t/adc-values-on-a-dwi-scan/1352)

<div class="topic-metadata">

**Author:** [@faraz1368](https://discourse.slicer.org/u/faraz1368)\
**Replies:** 11\
**Last updated:** [April 23, 2021, 9:09pm UTC](https://discourse.slicer.org/t/adc-values-on-a-dwi-scan/1352 "2021-04-23T21:09:35Z")

</div>

Hi, I wanted to know if it is possible to load a DWI scan into slicer, draw a ROI and find the ADC values (in 10-6 mm2/s) (average and a distribution curve) corresponding to that ROI. Thank you for your responses Fara…

---

## [Fiducial awol under 2D view but not 3D](https://discourse.slicer.org/t/fiducial-awol-under-2d-view-but-not-3d/17282)

<div class="topic-metadata">

**Author:** [@njeffery123](https://discourse.slicer.org/u/njeffery123)\
**Replies:** 2\
**Last updated:** [April 23, 2021, 6:17pm UTC](https://discourse.slicer.org/t/fiducial-awol-under-2d-view-but-not-3d/17282 "2021-04-23T18:17:11Z")

</div>

Dear All, Just upgraded from 4.10 to latest stable version 4.11.20210226 My old 4.10 scenes open up ok but strangely I can not see my fiducial markers in the 2D views. They do appear ok in the 3D view, just missing alt…

---

## [3D surface model color](https://discourse.slicer.org/t/3d-surface-model-color/17253)

<div class="topic-metadata">

**Author:** [@anromero](https://discourse.slicer.org/u/anromero)\
**Replies:** 7\
**Last updated:** [April 23, 2021, 5:37pm UTC](https://discourse.slicer.org/t/3d-surface-model-color/17253 "2021-04-23T17:37:41Z")

</div>

I’ve imported .ply files to do some landmarking for a geometric morphometrics project. Is there a way to set the surface to be the image collected from the surface scanner? This is an option in the old software Landmark …

[Previous page](https://discourse.slicer.org/latest.md?page=398)

[Next page](https://discourse.slicer.org/latest.md?page=400)
