# Latest

**URL:** https://discourse.slicer.org/latest.md?page=420

[Latest](https://discourse.slicer.org/latest.md) · [Categories](https://discourse.slicer.org/categories.md) · [Tags](https://discourse.slicer.org/tags.md)

**Page:** 421

---

## [Segment spheres or cubes](https://discourse.slicer.org/t/segment-spheres-or-cubes/15892)

<div class="topic-metadata">

**Author:** [@Aep93](https://discourse.slicer.org/u/Aep93)\
**Replies:** 1\
**Last updated:** [February 8, 2021, 5:10am UTC](https://discourse.slicer.org/t/segment-spheres-or-cubes/15892 "2021-02-08T05:10:56Z")

</div>

Hello, How can we create segmentations of basic shapes such as a sphere or a cube with specific values of radius, length, or width in the slicer?

---

## [Gel Dosimetry Slicelet - Calibration](https://discourse.slicer.org/t/gel-dosimetry-slicelet-calibration/15739)

<div class="topic-metadata">

**Author:** [@SmHoop](https://discourse.slicer.org/u/SmHoop)\
**Replies:** 5\
**Last updated:** [February 7, 2021, 7:57pm UTC](https://discourse.slicer.org/t/gel-dosimetry-slicelet-calibration/15739 "2021-02-07T19:57:56Z")

</div>

@cpinter Hi, In the calibration step of the slicelet (from the Wiki) I see step 10: Get mean optical densities from the central cylinder of the CALIBRATION volume Must a MeV irradiation be performed down the central…

---

## [Too many slices to segment](https://discourse.slicer.org/t/too-many-slices-to-segment/15717)

<div class="topic-metadata">

**Author:** [@vidyakar555](https://discourse.slicer.org/u/vidyakar555)\
**Replies:** 3\
**Last updated:** [February 7, 2021, 6:59pm UTC](https://discourse.slicer.org/t/too-many-slices-to-segment/15717 "2021-02-07T18:59:04Z")

</div>

Hi, I am new to the community. I am facing an issue with a discrepancy in the number of slices while segmentation. The MRI sequence has 23 slices as per volume information (and also if I open it any other software like …

---

## [Transfer scene files from 3DSlicer to Unreal Engine Support](https://discourse.slicer.org/t/transfer-scene-files-from-3dslicer-to-unreal-engine-support/15884)

<div class="topic-metadata">

**Author:** [@cshreyas](https://discourse.slicer.org/u/cshreyas)\
**Replies:** 2\
**Last updated:** [February 7, 2021, 6:57pm UTC](https://discourse.slicer.org/t/transfer-scene-files-from-3dslicer-to-unreal-engine-support/15884 "2021-02-07T18:57:11Z")

</div>

Hello, I am trying to transfer 3DSlicer image to Magic leap. There doenst seem to be a direct a way to do this (as of I know). One option to explore is to transfer 3DSlicer to Unreal Engine and later import that to Mag…

---

## [Out of frame of yellow and green viewer](https://discourse.slicer.org/t/out-of-frame-of-yellow-and-green-viewer/15882)

<div class="topic-metadata">

**Author:** [@hao](https://discourse.slicer.org/u/hao)\
**Replies:** 0\
**Last updated:** [February 7, 2021, 4:34pm UTC](https://discourse.slicer.org/t/out-of-frame-of-yellow-and-green-viewer/15882 "2021-02-07T16:34:40Z")

</div>

HI, I tried to do the registration of deux CT dicom series but the images could not showed in the green and yellow view (coronal and sagittal). when I put the mouse in these windows, il shows in the left corner that it "…

---

## [Problems with the SPHARM-PDM on Slicer-4.8.0-linux-amd64 (Command-Line Tool, the step GenParaMesh)](https://discourse.slicer.org/t/problems-with-the-spharm-pdm-on-slicer-4-8-0-linux-amd64-command-line-tool-the-step-genparamesh/15877)

<div class="topic-metadata">

**Author:** [@Daisy\_Xiong](https://discourse.slicer.org/u/Daisy_Xiong)\
**Replies:** 0\
**Last updated:** [February 7, 2021, 4:31am UTC](https://discourse.slicer.org/t/problems-with-the-spharm-pdm-on-slicer-4-8-0-linux-amd64-command-line-tool-the-step-genparamesh/15877 "2021-02-07T04:31:43Z")

</div>

Hello, everyone, I tried to utilize the software Slicer(Slicer-4.8.0-linux-amd64) and the method SPHARM-PDM to get the some SPHARM Mesh ( such as the output files \*para.vtk and \*SPHARM\_Ellalign.vtk). If I use the main …

---

## [Reformat module Values not resetting](https://discourse.slicer.org/t/reformat-module-values-not-resetting/15873)

<div class="topic-metadata">

**Author:** [@manjula](https://discourse.slicer.org/u/manjula)\
**Replies:** 1\
**Last updated:** [February 6, 2021, 5:22pm UTC](https://discourse.slicer.org/t/reformat-module-values-not-resetting/15873 "2021-02-06T17:22:56Z")

</div>

Hi, Why the values in reformat module do not reset by default? Even if I close the scene (Ctlr W) still the what ever the rotation values remain there in the next scene. Also when I change the rotation value in red sli…

---

## [Error when importing Matplotlib](https://discourse.slicer.org/t/error-when-importing-matplotlib/15860)

<div class="topic-metadata">

**Author:** [@11141](https://discourse.slicer.org/u/11141)\
**Replies:** 1\
**Last updated:** [February 6, 2021, 5:43am UTC](https://discourse.slicer.org/t/error-when-importing-matplotlib/15860 "2021-02-06T05:43:04Z")

</div>

Hi. I created a extension, but the following error occurred. Blockquote Traceback (most recent call last): File “”, line 1, in File “C:\\Users\\20200\\AppData\\Local\\NA-MIC\\Slicer 4.11.20200930\\lib\\Python\\Lib\\imp.py”,…

---

## [Problems with Python and meshtolabelmap with Slicer 4.11 (python module worked on Slicer 4.10)](https://discourse.slicer.org/t/problems-with-python-and-meshtolabelmap-with-slicer-4-11-python-module-worked-on-slicer-4-10/15777)

<div class="topic-metadata">

**Author:** [@Christian\_Nell](https://discourse.slicer.org/u/Christian_Nell)\
**Replies:** 2\
**Last updated:** [February 5, 2021, 8:25pm UTC](https://discourse.slicer.org/t/problems-with-python-and-meshtolabelmap-with-slicer-4-11-python-module-worked-on-slicer-4-10/15777 "2021-02-05T20:25:47Z")

</div>

I am scripting a module in 3D Slicer using python and the script worked on Slicer 4.10 but now that I’ve updated to the new version 4.11 part of the script is not working. Specifically, a part where I create a handle for…

---

## [Problem in calculating D95 using Dose Volume Histogram module](https://discourse.slicer.org/t/problem-in-calculating-d95-using-dose-volume-histogram-module/15870)

<div class="topic-metadata">

**Author:** [@aseman](https://discourse.slicer.org/u/aseman)\
**Replies:** 0\
**Last updated:** [February 5, 2021, 7:33pm UTC](https://discourse.slicer.org/t/problem-in-calculating-d95-using-dose-volume-histogram-module/15870 "2021-02-05T19:33:12Z")

</div>

Hi 3D Slicer experts and all I want to calculate dosimetric parameters such as mean dose and D95 (the percentage of the prescription dose covering 95% of the volume) for some of head and neck patients(such as larynx can…

---

## [Newbie: Overlaying .nii file with Dicom](https://discourse.slicer.org/t/newbie-overlaying-nii-file-with-dicom/15854)

<div class="topic-metadata">

**Author:** [@jberanoteh](https://discourse.slicer.org/u/jberanoteh)\
**Replies:** 4\
**Last updated:** [February 5, 2021, 5:56pm UTC](https://discourse.slicer.org/t/newbie-overlaying-nii-file-with-dicom/15854 "2021-02-05T17:56:47Z")

</div>

Operating system: Windows 10 Slicer version: 4.11.20200930 I have a DICOM file containing 1 CT scan cross-section slice and an .nii / .nii.gz file containing the tagged muscle volume of the specific DICOM file. I would…

---

## [Adding a field to JSON file from extension](https://discourse.slicer.org/t/adding-a-field-to-json-file-from-extension/15849)

<div class="topic-metadata">

**Author:** [@smrolfe](https://discourse.slicer.org/u/smrolfe)\
**Replies:** 3\
**Last updated:** [February 5, 2021, 5:54pm UTC](https://discourse.slicer.org/t/adding-a-field-to-json-file-from-extension/15849 "2021-02-05T17:54:25Z")

</div>

I would like to implement a way to distinguish anatomical landmarks from constructed landmarks such as semi-landmarks generated by curve resampling or from the modules in our SlicerMorph extension. Some methods we use ou…

---

## [Cannot load DVF](https://discourse.slicer.org/t/cannot-load-dvf/15807)

<div class="topic-metadata">

**Author:** [@toyama](https://discourse.slicer.org/u/toyama)\
**Replies:** 4\
**Last updated:** [February 5, 2021, 10:07am UTC](https://discourse.slicer.org/t/cannot-load-dvf/15807 "2021-02-05T10:07:44Z")

</div>

When I tried to import a DVF (.dcm file) created by another software, the message “Not Dicom File” was displayed. Please let me know if there is a way to import a DVF created by a software other than 3DSlicer.

---

## [About changing mouse cursor](https://discourse.slicer.org/t/about-changing-mouse-cursor/15814)

<div class="topic-metadata">

**Author:** [@forfullstack](https://discourse.slicer.org/u/forfullstack)\
**Replies:** 5\
**Last updated:** [February 5, 2021, 9:52am UTC](https://discourse.slicer.org/t/about-changing-mouse-cursor/15814 "2021-02-05T09:52:26Z")

</div>

I want to change shape of mouse cursor when mouse crosses MPR lines I’ve added function in the vtkMRMLSliceIntersectionWidget.cxx to check crossing with MPR lines. But how can I change cursor in that time? I think I ha…

---

## [Comparing Dose accumulation from TPS Varian Eclipse and 3D Slicer](https://discourse.slicer.org/t/comparing-dose-accumulation-from-tps-varian-eclipse-and-3d-slicer/15796)

<div class="topic-metadata">

**Author:** [@jannah\_fj](https://discourse.slicer.org/u/jannah_fj)\
**Replies:** 1\
**Last updated:** [February 5, 2021, 4:31am UTC](https://discourse.slicer.org/t/comparing-dose-accumulation-from-tps-varian-eclipse-and-3d-slicer/15796 "2021-02-05T04:31:21Z")

</div>

Hello there, I tried to do the accumulation of doses with 3D Slicer, then I compared with the accumulated doses from the TPS simulation results of the varian eclipse manually (neither use the dose comparison nor the DVH …

---

## ["Show 3D" only meshing outside of ROI](https://discourse.slicer.org/t/show-3d-only-meshing-outside-of-roi/15826)

<div class="topic-metadata">

**Author:** [@d\_roscoe\_j](https://discourse.slicer.org/u/d_roscoe_j)\
**Replies:** 3\
**Last updated:** [February 5, 2021, 4:18am UTC](https://discourse.slicer.org/t/show-3d-only-meshing-outside-of-roi/15826 "2021-02-05T04:18:47Z")

</div>

After uploading a .vol file of an sonogram, I create a volume rendering of the file and crop the ROI to be the section I want isolated (roughly) then change the “gradient anisotropic diffusion” of the roi, creating a new…

---

## [Computer slows down after volume is oversampled](https://discourse.slicer.org/t/computer-slows-down-after-volume-is-oversampled/15743)

<div class="topic-metadata">

**Author:** [@Jason\_Wong](https://discourse.slicer.org/u/Jason_Wong)\
**Replies:** 20\
**Last updated:** [February 5, 2021, 4:15am UTC](https://discourse.slicer.org/t/computer-slows-down-after-volume-is-oversampled/15743 "2021-02-05T04:15:12Z")

</div>

I think I’ve managed to oversample the volume. Although, it seems that whenever I try to do so, the panels turn blank on a relatively strong computer but lags my computer intensely when I use a weaker computer. Is it pos…

---

## [Adding Slicer to official VTK Continuous Integration aka "Contract Testing"](https://discourse.slicer.org/t/adding-slicer-to-official-vtk-continuous-integration-aka-contract-testing/15848)

<div class="topic-metadata">

**Author:** [@jcfr](https://discourse.slicer.org/u/jcfr)\
**Replies:** 1\
**Last updated:** [February 5, 2021, 3:39am UTC](https://discourse.slicer.org/t/adding-slicer-to-official-vtk-continuous-integration-aka-contract-testing/15848 "2021-02-05T03:39:20Z")

</div>

To more effectively identify and address issues associated with the latest version of VTK that may impact Slicer, we are working with the VTK team to setup what we call “contract testing”. In a nutshell, Slicer will be…

---

## [Fail to convert DICOM to nrrd](https://discourse.slicer.org/t/fail-to-convert-dicom-to-nrrd/15855)

<div class="topic-metadata">

**Author:** [@ecgt](https://discourse.slicer.org/u/ecgt)\
**Replies:** 1\
**Last updated:** [February 5, 2021, 3:19am UTC](https://discourse.slicer.org/t/fail-to-convert-dicom-to-nrrd/15855 "2021-02-05T03:19:35Z")

</div>

Operating system:Windows Slicer version:4.11.20200930 r29402 / 002be18 Expected behavior:convert to nrrd Actual behavior E: can’t determine ‘PhotometricInterpretation’ of decompressed image E: mandatory attribute ‘P…

---

## [Programmatic Conversion of RT Struct to nrrd](https://discourse.slicer.org/t/programmatic-conversion-of-rt-struct-to-nrrd/15363)

<div class="topic-metadata">

**Author:** [@PhilippG](https://discourse.slicer.org/u/PhilippG)\
**Replies:** 17\
**Last updated:** [February 4, 2021, 10:40pm UTC](https://discourse.slicer.org/t/programmatic-conversion-of-rt-struct-to-nrrd/15363 "2021-02-04T22:40:03Z")

</div>

Hi, I first want to say how impressed I am with the persistent and comprehensive support provided by the slicer team on these forums! Now for the boring part… I’m looking to programmatically convert an RTstruct file to…

---

## [Change reference system](https://discourse.slicer.org/t/change-reference-system/15840)

<div class="topic-metadata">

**Author:** [@lorenzo\_bennati](https://discourse.slicer.org/u/lorenzo_bennati)\
**Replies:** 3\
**Last updated:** [February 4, 2021, 4:23pm UTC](https://discourse.slicer.org/t/change-reference-system/15840 "2021-02-04T16:23:38Z")

</div>

Hi everyone, I have a Dicom image that is represented in Slicer using the Anatomical coordinate system (RAS namely Right, Anterior and Superior). I was wondering if it is possible in Slicer to change the reference syst…

---

## [From labelmap to model and from model to labelmap python scripts](https://discourse.slicer.org/t/from-labelmap-to-model-and-from-model-to-labelmap-python-scripts/15833)

<div class="topic-metadata">

**Author:** [@brhoom](https://discourse.slicer.org/u/brhoom)\
**Replies:** 2\
**Last updated:** [February 4, 2021, 3:27pm UTC](https://discourse.slicer.org/t/from-labelmap-to-model-and-from-model-to-labelmap-python-scripts/15833 "2021-02-04T15:27:36Z")

</div>

Dear all, I wrote these to functions to convert between labelmap and model nodes. Is there a similar simple non-slicer solution e.g. using only itk and vtk? def lbl2model(lblNode,lblName): segNode = slicer.mrmlSc…

---

## [Segmenting pulmonary fibrosis](https://discourse.slicer.org/t/segmenting-pulmonary-fibrosis/15792)

<div class="topic-metadata">

**Author:** [@joachim](https://discourse.slicer.org/u/joachim)\
**Replies:** 3\
**Last updated:** [February 4, 2021, 2:39pm UTC](https://discourse.slicer.org/t/segmenting-pulmonary-fibrosis/15792 "2021-02-04T14:39:38Z")

</div>

I was asked to create a model of pulmonary fibrosis (3D-printing). It’s easy to see the structure of cells and thin walls on the images, but it is difficult to segment this structure. Cells drawn by hand Interpolate…

---

## [Segmentation edges](https://discourse.slicer.org/t/segmentation-edges/15837)

<div class="topic-metadata">

**Author:** [@Giulia1](https://discourse.slicer.org/u/Giulia1)\
**Replies:** 1\
**Last updated:** [February 4, 2021, 2:00pm UTC](https://discourse.slicer.org/t/segmentation-edges/15837 "2021-02-04T14:00:44Z")

</div>

Hi! I have a problem during knee segmentation, as the segments are not created with a linear and defined line on the edges (image below). I would like to understand if there is a way to get the outline obtained from the …

---

## [Surface Registration (original STL with cbct converted to STL )](https://discourse.slicer.org/t/surface-registration-original-stl-with-cbct-converted-to-stl/15782)

<div class="topic-metadata">

**Author:** [@robertoruizmu](https://discourse.slicer.org/u/robertoruizmu)\
**Replies:** 6\
**Last updated:** [February 4, 2021, 1:43pm UTC](https://discourse.slicer.org/t/surface-registration-original-stl-with-cbct-converted-to-stl/15782 "2021-02-04T13:43:55Z")

</div>

Hi everyone! I´m trying to make a surface registration with 2 STL files: one STL obteined with an intraoral scanner , and the other STL is a numpy array(cbct) that I segmented and converted to STL with a code I made in…

---

## [Calls to CLI makes tests to fail](https://discourse.slicer.org/t/calls-to-cli-makes-tests-to-fail/13835)

<div class="topic-metadata">

**Author:** [@Alex\_Vergara](https://discourse.slicer.org/u/Alex_Vergara)\
**Replies:** 14\
**Last updated:** [February 4, 2021, 11:51am UTC](https://discourse.slicer.org/t/calls-to-cli-makes-tests-to-fail/13835 "2021-02-04T11:51:14Z")

</div>

In my module I have some calls to Slicer CLI scripts, like brainsresample. In my code I do parameters = {'inputVolume': nodeCT.data, 'referenceVolume': nodeSPECT.data, 'outputVolume': CTRSNode, 'interpolat…

---

## [How to toggle the button of "orthobutton" via python](https://discourse.slicer.org/t/how-to-toggle-the-button-of-orthobutton-via-python/15830)

<div class="topic-metadata">

**Author:** [@aiden.zhu](https://discourse.slicer.org/u/aiden.zhu)\
**Replies:** 2\
**Last updated:** [February 4, 2021, 7:30am UTC](https://discourse.slicer.org/t/how-to-toggle-the-button-of-orthobutton-via-python/15830 "2021-02-04T07:30:09Z")

</div>

Operating system: windows Slicer version: 4.11.0-2019-06-23 r28335 Expected behavior: Actual behavior: Hi all, What’s the sub-function to control the orthobutton to toggle here? Thanks a lot. Aiden

---

## ["Segment Editor" Panel Completely Blank](https://discourse.slicer.org/t/segment-editor-panel-completely-blank/15793)

<div class="topic-metadata">

**Author:** [@d\_roscoe\_j](https://discourse.slicer.org/u/d_roscoe_j)\
**Replies:** 2\
**Last updated:** [February 3, 2021, 8:33pm UTC](https://discourse.slicer.org/t/segment-editor-panel-completely-blank/15793 "2021-02-03T20:33:32Z")

</div>

I’ve been working on editing a VOL file and when I select “Segment Editor” to start removing parts of the model, the panel that should contain all the segment editor tools is completely blank. I’ve attempted to uninstal…

---

## [Cannot import nrrd](https://discourse.slicer.org/t/cannot-import-nrrd/15822)

<div class="topic-metadata">

**Author:** [@jyhong906](https://discourse.slicer.org/u/jyhong906)\
**Replies:** 1\
**Last updated:** [February 3, 2021, 8:22pm UTC](https://discourse.slicer.org/t/cannot-import-nrrd/15822 "2021-02-03T20:22:47Z")

</div>

Hi, this is my first time using a medical image (nrrd format) Please understand even if there is something lacking. My nrrd files include ROI of ultrasound image. Before analyzing with pyradiomics, I want to use a 3D …

---

## [Separate vessels from bones](https://discourse.slicer.org/t/separate-vessels-from-bones/15703)

<div class="topic-metadata">

**Author:** [@Sevilay\_Karasu](https://discourse.slicer.org/u/Sevilay_Karasu)\
**Replies:** 4\
**Last updated:** [February 3, 2021, 6:09pm UTC](https://discourse.slicer.org/t/separate-vessels-from-bones/15703 "2021-02-03T18:09:59Z")

</div>

Dear sir, when volume rendering is performed on the ct angiography data, arteries is obtained with bone. ı want to see just arteries from ct angiography data, without bone.but ı want to make a transparency on the bone. …

[Previous page](https://discourse.slicer.org/latest.md?page=419)

[Next page](https://discourse.slicer.org/latest.md?page=421)
