# Latest

**URL:** https://discourse.slicer.org/latest.md?page=565

[Latest](https://discourse.slicer.org/latest.md) · [Categories](https://discourse.slicer.org/categories.md) · [Tags](https://discourse.slicer.org/tags.md)

**Page:** 566

---

## [Heart segmentation failure](https://discourse.slicer.org/t/heart-segmentation-failure/5326)

<div class="topic-metadata">

**Author:** [@opetne](https://discourse.slicer.org/u/opetne)\
**Replies:** 2\
**Last updated:** [January 11, 2019, 3:09pm UTC](https://discourse.slicer.org/t/heart-segmentation-failure/5326 "2019-01-11T15:09:44Z")

</div>

I have a cardiac CT series from pigs. I did hear segmentation before using segment editor following the steps of the video, created by @lassoan without any problem, having good results. This series contains a whole card…

---

## [Overlaying a dot on the camera stream using plus server and slicer module](https://discourse.slicer.org/t/overlaying-a-dot-on-the-camera-stream-using-plus-server-and-slicer-module/5318)

<div class="topic-metadata">

**Author:** [@blackfish](https://discourse.slicer.org/u/blackfish)\
**Replies:** 5\
**Last updated:** [January 11, 2019, 2:59pm UTC](https://discourse.slicer.org/t/overlaying-a-dot-on-the-camera-stream-using-plus-server-and-slicer-module/5318 "2019-01-11T14:59:53Z")

</div>

Operating system: win 10 Slicer version: 4.11.0 Expected behavior: be able to draw a dot on top of the RGB camera feed that is input to the slicer module using plus server. Imagine being able to draw a dot on the video…

---

## [Adding custom tags to subject without creating/exporting DICOMs](https://discourse.slicer.org/t/adding-custom-tags-to-subject-without-creating-exporting-dicoms/5189)

<div class="topic-metadata">

**Author:** [@muratmaga](https://discourse.slicer.org/u/muratmaga)\
**Replies:** 4\
**Last updated:** [January 10, 2019, 7:14pm UTC](https://discourse.slicer.org/t/adding-custom-tags-to-subject-without-creating-exporting-dicoms/5189 "2019-01-10T19:14:57Z")

</div>

Is it possible to set and display some of the DICOM tags from the subject hierarchy without actually having a dicom volume ? E.g., I organized this mockup MRB file. It contains everything I need in terms of imaging data …

---

## [Apply Transformation to a model](https://discourse.slicer.org/t/apply-transformation-to-a-model/5327)

<div class="topic-metadata">

**Author:** [@siaeleni](https://discourse.slicer.org/u/siaeleni)\
**Replies:** 3\
**Last updated:** [January 10, 2019, 6:18pm UTC](https://discourse.slicer.org/t/apply-transformation-to-a-model/5327 "2019-01-10T18:18:14Z")

</div>

Hi, I want to set and apply a transformation matrix using Python. Here is my code: transform = slicer.vtkMRMLTransformNode() transform.SetName('Transformation') slicer.mrmlScene.AddNode(transform) matrix = vtk.vtkMat…

---

## [Model to Model Distance ](https://discourse.slicer.org/t/model-to-model-distance/5324)

<div class="topic-metadata">

**Author:** [@emrobert](https://discourse.slicer.org/u/emrobert)\
**Replies:** 4\
**Last updated:** [January 10, 2019, 6:11pm UTC](https://discourse.slicer.org/t/model-to-model-distance/5324 "2019-01-10T18:11:33Z")

</div>

Operating system: OS X MAC Slicer version: 4.8.1 Expected behavior: I expected ShapePopulationViewer to show up under the Surface Models tab once I downloaded the Model to Model Distance extension module Actual behavi…

---

## [Running recent nightly Slicer on old computers](https://discourse.slicer.org/t/running-recent-nightly-slicer-on-old-computers/2542)

<div class="topic-metadata">

**Author:** [@Bio\_Medical](https://discourse.slicer.org/u/Bio_Medical)\
**Replies:** 6\
**Last updated:** [January 10, 2019, 12:44pm UTC](https://discourse.slicer.org/t/running-recent-nightly-slicer-on-old-computers/2542 "2019-01-10T12:44:04Z")

</div>

---

## [Gipl files freezes slicer](https://discourse.slicer.org/t/gipl-files-freezes-slicer/5312)

<div class="topic-metadata">

**Author:** [@muratmaga](https://discourse.slicer.org/u/muratmaga)\
**Replies:** 4\
**Last updated:** [January 9, 2019, 7:58pm UTC](https://discourse.slicer.org/t/gipl-files-freezes-slicer/5312 "2019-01-09T19:58:28Z")

</div>

I was given two volumes in gipl format (image and labelmap), that I can open with ITKsnap without any problem. When I drag and drop them into Slicer, first it suggests to load them as ‘Scalar Overlay’ as oppose to ‘Volum…

---

## [Relationship between SegmentEditorWidget and SegmentEditorNode?](https://discourse.slicer.org/t/relationship-between-segmenteditorwidget-and-segmenteditornode/5304)

<div class="topic-metadata">

**Author:** [@mikebind](https://discourse.slicer.org/u/mikebind)\
**Replies:** 4\
**Last updated:** [January 9, 2019, 1:07am UTC](https://discourse.slicer.org/t/relationship-between-segmenteditorwidget-and-segmenteditornode/5304 "2019-01-09T01:07:32Z")

</div>

I am working on a set of custom extensions, and I have been able to muddle through to get several things working, but I am now running into problems and having trouble debugging. I think my problem may be related to not…

---

## [Import DICOM files problem](https://discourse.slicer.org/t/import-dicom-files-problem/5301)

<div class="topic-metadata">

**Author:** [@Thomas](https://discourse.slicer.org/u/Thomas)\
**Replies:** 6\
**Last updated:** [January 8, 2019, 7:27pm UTC](https://discourse.slicer.org/t/import-dicom-files-problem/5301 "2019-01-08T19:27:33Z")

</div>

Hello. I have problem with importing data to 3D Slicer. I can see how my data is importing slice by slice, but when the loading is 100% there is just one transversal slice and I can’t work with it as a stack. I already …

---

## [Could not load: 1: 3D CBCT Stitched Volume as a Scalar Volume](https://discourse.slicer.org/t/could-not-load-1-3d-cbct-stitched-volume-as-a-scalar-volume/5310)

<div class="topic-metadata">

**Author:** [@gbenat](https://discourse.slicer.org/u/gbenat)\
**Replies:** 2\
**Last updated:** [January 8, 2019, 7:25pm UTC](https://discourse.slicer.org/t/could-not-load-1-3d-cbct-stitched-volume-as-a-scalar-volume/5310 "2019-01-08T19:25:34Z")

</div>

Hello everyone, It’s my first time using Slicer (latest version not nightly) and when I want to load the dicom files everytime I have this message “Could not load: 1: 3D CBCT Stitched Volume as a Scalar Volume”. I’ve l…

---

## [2019.1.7 Hangout](https://discourse.slicer.org/t/2019-1-7-hangout/5305)

<div class="topic-metadata">

**Author:** [@Sam\_Horvath](https://discourse.slicer.org/u/Sam_Horvath)\
**Replies:** 2\
**Last updated:** [January 8, 2019, 3:30pm UTC](https://discourse.slicer.org/t/2019-1-7-hangout/5305 "2019-01-08T15:30:16Z")

</div>

Hi, We will be having our weekly hangout at tomorrow 10:00 AM EST. Since we will have the project week call at 10:30 AM (details here ), this call will last only 30mins. Topics will include: ITKv5/C++ 11 transition …

---

## [Failed build on Windows using VS2015 (with VS2017 also present on system)](https://discourse.slicer.org/t/failed-build-on-windows-using-vs2015-with-vs2017-also-present-on-system/3640)

<div class="topic-metadata">

**Author:** [@KaburNaj](https://discourse.slicer.org/u/KaburNaj)\
**Replies:** 16\
**Last updated:** [January 8, 2019, 5:34am UTC](https://discourse.slicer.org/t/failed-build-on-windows-using-vs2015-with-vs2017-also-present-on-system/3640 "2019-01-08T05:34:31Z")

</div>

Operating system: Windows 7 Enterprise, Service Pack 1 Slicer version: 4.8.1 (r26813) Expected behavior: Build from Source Actual behavior: Build errors in CTK project I am building the latest stable release of Slice…

---

## [Change data probe to view MIP HU](https://discourse.slicer.org/t/change-data-probe-to-view-mip-hu/4516)

<div class="topic-metadata">

**Author:** [@mag](https://discourse.slicer.org/u/mag)\
**Replies:** 9\
**Last updated:** [January 8, 2019, 3:54am UTC](https://discourse.slicer.org/t/change-data-probe-to-view-mip-hu/4516 "2019-01-08T03:54:29Z")

</div>

Hi, I’m looking at very small features on CTA scans and there are 2 things I’d like data probe to do but it doesn’t and I’m not sure how to modify it to get the behaviour I want. When I am in one of the slice viewers,…

---

## [What input does slicer take?](https://discourse.slicer.org/t/what-input-does-slicer-take/5278)

<div class="topic-metadata">

**Author:** [@Vlad\_Dobrin](https://discourse.slicer.org/u/Vlad_Dobrin)\
**Replies:** 4\
**Last updated:** [January 7, 2019, 7:24pm UTC](https://discourse.slicer.org/t/what-input-does-slicer-take/5278 "2019-01-07T19:24:05Z")

</div>

Operating system: Windows Slicer version: 4.10.0 Expected behavior: N/A Actual behavior: N/A What file type input does 3D Slicer take in? and what can it produce? As one example could 3D Slicer take JPEG or TIFF?

---

## [Handle additional images as numpy arrays in Slicer](https://discourse.slicer.org/t/handle-additional-images-as-numpy-arrays-in-slicer/3310)

<div class="topic-metadata">

**Author:** [@virginia\_fgc](https://discourse.slicer.org/u/virginia_fgc)\
**Replies:** 9\
**Last updated:** [January 7, 2019, 3:11pm UTC](https://discourse.slicer.org/t/handle-additional-images-as-numpy-arrays-in-slicer/3310 "2019-01-07T15:11:55Z")

</div>

Hello, In order to work on my imported MR image, I need to create a Python script in which I need to import as well (separately): A txt file with numeric data An image that should be handled as an array Would it be p…

---

## [Observe annotation ruler size change](https://discourse.slicer.org/t/observe-annotation-ruler-size-change/5039)

<div class="topic-metadata">

**Author:** [@giancu](https://discourse.slicer.org/u/giancu)\
**Replies:** 4\
**Last updated:** [January 7, 2019, 1:48pm UTC](https://discourse.slicer.org/t/observe-annotation-ruler-size-change/5039 "2019-01-07T13:48:26Z")

</div>

Hi. I try to capture the change in size of a vtkMRMLAnnotationRulerNode. Is there any event (signal) which is triggered in such a situation? I am using the nice LineProfile example of Andras, but I would like to be able …

---

## [Adjust field of view to non-None volume layer](https://discourse.slicer.org/t/adjust-field-of-view-to-non-none-volume-layer/5292)

<div class="topic-metadata">

**Author:** [@feng](https://discourse.slicer.org/u/feng)\
**Replies:** 2\
**Last updated:** [January 7, 2019, 1:43pm UTC](https://discourse.slicer.org/t/adjust-field-of-view-to-non-none-volume-layer/5292 "2019-01-07T13:43:51Z")

</div>

Could anyone explain what does non-None volume layer mean? I was exporting screenshots and found this button above the view window, “Adjust the slice viewer’s field of view to match the extent of non-None volume layer (…

---

## [i installed 3d slicer 4.10. the option to load DICOM and sample data do not work](https://discourse.slicer.org/t/i-installed-3d-slicer-4-10-the-option-to-load-dicom-and-sample-data-do-not-work/5291)

<div class="topic-metadata">

**Author:** [@ali\_adib](https://discourse.slicer.org/u/ali_adib)\
**Replies:** 3\
**Last updated:** [January 7, 2019, 1:38pm UTC](https://discourse.slicer.org/t/i-installed-3d-slicer-4-10-the-option-to-load-dicom-and-sample-data-do-not-work/5291 "2019-01-07T13:38:53Z")

</div>

Operating system: Slicer version: Expected behavior: Actual behavior:

---

## [How to label segmented organs?](https://discourse.slicer.org/t/how-to-label-segmented-organs/5289)

<div class="topic-metadata">

**Author:** [@Mojtaba](https://discourse.slicer.org/u/Mojtaba)\
**Replies:** 3\
**Last updated:** [January 7, 2019, 12:47pm UTC](https://discourse.slicer.org/t/how-to-label-segmented-organs/5289 "2019-01-07T12:47:10Z")

</div>

hi I want to calculate a dose absorption for some organs from PET and CT images. for this goal, I need to label segimented organs. which module can help me? thank you.

---

## [How to import all dicom files into one volume](https://discourse.slicer.org/t/how-to-import-all-dicom-files-into-one-volume/5260)

<div class="topic-metadata">

**Author:** [@TingtingYu](https://discourse.slicer.org/u/TingtingYu)\
**Replies:** 12\
**Last updated:** [January 7, 2019, 11:34am UTC](https://discourse.slicer.org/t/how-to-import-all-dicom-files-into-one-volume/5260 "2019-01-07T11:34:20Z")

</div>

Hi, I have a binary file contains volumetric information and its format was converted into DICOM format. Each .dcm file contains one-slide information. Then I imported all these dicom files, however, each slide was sho…

---

## [PET image quntification](https://discourse.slicer.org/t/pet-image-quntification/5141)

<div class="topic-metadata">

**Author:** [@Mojtaba](https://discourse.slicer.org/u/Mojtaba)\
**Replies:** 2\
**Last updated:** [January 6, 2019, 2:45pm UTC](https://discourse.slicer.org/t/pet-image-quntification/5141 "2019-01-06T14:45:55Z")

</div>

Operating system: Fedora 25 Slicer version:4.9 hi I have segmented my pet images. I want to determine a maximum and minimum pixel value for each segment. which module can help me?

---

## [Tutorial help](https://discourse.slicer.org/t/tutorial-help/5282)

<div class="topic-metadata">

**Author:** [@dadada](https://discourse.slicer.org/u/dadada)\
**Replies:** 1\
**Last updated:** [January 5, 2019, 5:02pm UTC](https://discourse.slicer.org/t/tutorial-help/5282 "2019-01-05T17:02:07Z")

</div>

hello can someone help me please and make a short tutorium ? when I load the data from this site https://www.slicer.org/wiki/Modules:BRAINSFit, my Longitudinal Checkerboard Before registration dont look so as how the pic…

---

## [Registration of two CT image](https://discourse.slicer.org/t/registration-of-two-ct-image/5280)

<div class="topic-metadata">

**Author:** [@aseman](https://discourse.slicer.org/u/aseman)\
**Replies:** 1\
**Last updated:** [January 5, 2019, 2:13pm UTC](https://discourse.slicer.org/t/registration-of-two-ct-image/5280 "2019-01-05T14:13:21Z")

</div>

Operating system:4.8.1 Hi 3D Slicer experts and all I want to register two CT images (i.e lung contours) and I used Segment Registration Module. Finally it doesn’t register two images (like below figure), and the messa…

---

## [New category for job postings?](https://discourse.slicer.org/t/new-category-for-job-postings/5276)

<div class="topic-metadata">

**Author:** [@lassoan](https://discourse.slicer.org/u/lassoan)\
**Replies:** 4\
**Last updated:** [January 5, 2019, 12:33am UTC](https://discourse.slicer.org/t/new-category-for-job-postings/5276 "2019-01-05T00:33:17Z")

</div>

Two people asked me in the past couple of days about how to place job postings and Andriy has also just posted one. So, we have enough of these that we should define a standard way of dealing with these. I think we shou…

---

## [Postdoc position available at NCI/FLNCR (Frederick, MD, USA)](https://discourse.slicer.org/t/postdoc-position-available-at-nci-flncr-frederick-md-usa/4375)

<div class="topic-metadata">

**Author:** [@yliu](https://discourse.slicer.org/u/yliu)\
**Replies:** 0\
**Last updated:** [October 12, 2018, 3:47pm UTC](https://discourse.slicer.org/t/postdoc-position-available-at-nci-flncr-frederick-md-usa/4375 "2018-10-12T15:47:50Z")

</div>

Dear Slicer community, The Advanced Biomedical and Computational Science (ABCS) group at NCI/Frederick National Laboratory for Cancer Research (FNLCR) seeks a postdoc fellow with radiology image analysis background. The…

---

## [Multiple job openings - Deep Learning in Medicine @ Harvard - Hugo Aerts CIBL](https://discourse.slicer.org/t/multiple-job-openings-deep-learning-in-medicine-harvard-hugo-aerts-cibl/4456)

<div class="topic-metadata">

**Author:** [@fedorov](https://discourse.slicer.org/u/fedorov)\
**Replies:** 0\
**Last updated:** [October 18, 2018, 6:48pm UTC](https://discourse.slicer.org/t/multiple-job-openings-deep-learning-in-medicine-harvard-hugo-aerts-cibl/4456 "2018-10-18T18:48:06Z")

</div>

Multiple student, postdoc and engineer positions available, check this out for details and application instructions: http://www.cibl-harvard.org/joinus

---

## [Research Software Engineer position at the University of Leeds](https://discourse.slicer.org/t/research-software-engineer-position-at-the-university-of-leeds/5166)

<div class="topic-metadata">

**Author:** [@fedorov](https://discourse.slicer.org/u/fedorov)\
**Replies:** 0\
**Last updated:** [December 21, 2018, 5:13pm UTC](https://discourse.slicer.org/t/research-software-engineer-position-at-the-university-of-leeds/5166 "2018-12-21T17:13:38Z")

</div>

Details and application instructions at https://jobs.leeds.ac.uk/vacancy.aspx?ref=MHLCM1165 Do you have experience in developing software solutions for medical imaging research and applications? Do you want to help in t…

---

## [PhD student opportunities at NCT Dresden/Oncoray](https://discourse.slicer.org/t/phd-student-opportunities-at-nct-dresden-oncoray/5273)

<div class="topic-metadata">

**Author:** [@fedorov](https://discourse.slicer.org/u/fedorov)\
**Replies:** 0\
**Last updated:** [January 4, 2019, 2:27pm UTC](https://discourse.slicer.org/t/phd-student-opportunities-at-nct-dresden-oncoray/5273 "2019-01-04T14:27:51Z")

</div>

There are two job openings for PhD students at a group at National Center for Tumor Diseases (NCT) Dresden. If you happen to know someone who may be interested, please share it with him or her. The following positions ar…

---

## [Resolution in 3dslicer](https://discourse.slicer.org/t/resolution-in-3dslicer/5272)

<div class="topic-metadata">

**Author:** [@Pilar](https://discourse.slicer.org/u/Pilar)\
**Replies:** 1\
**Last updated:** [January 4, 2019, 2:25pm UTC](https://discourse.slicer.org/t/resolution-in-3dslicer/5272 "2019-01-04T14:25:39Z")

</div>

Hi 3D Slicer experts, I have a doubt about 3DSLicer. What is the level of image resolution used by the program? How many points does 3DSlicer use in each image? 10,000, 100,000, 500,000,… Or in the case that it could …

---

## [Registration of Head CT & MRI of Non-human Primate](https://discourse.slicer.org/t/registration-of-head-ct-mri-of-non-human-primate/5254)

<div class="topic-metadata">

**Author:** [@Bori](https://discourse.slicer.org/u/Bori)\
**Replies:** 1\
**Last updated:** [January 3, 2019, 5:40am UTC](https://discourse.slicer.org/t/registration-of-head-ct-mri-of-non-human-primate/5254 "2019-01-03T05:40:17Z")

</div>

Operating system: OS X El Capitan Slicer version: 4.10.0 r27501 Overall Goal: Obtaining the best possible registration of head CT and MRI from non-human primate subject to be used in image-guided surgery for electrode …

[Previous page](https://discourse.slicer.org/latest.md?page=564)

[Next page](https://discourse.slicer.org/latest.md?page=566)
