# Latest

**URL:** https://discourse.slicer.org/latest.md?page=603

[Latest](https://discourse.slicer.org/latest.md) · [Categories](https://discourse.slicer.org/categories.md) · [Tags](https://discourse.slicer.org/tags.md)

**Page:** 604

---

## ["Margin size" and "Shell thickness" are too small for a volume with 0.05 0.05 0.05 spacing](https://discourse.slicer.org/t/margin-size-and-shell-thickness-are-too-small-for-a-volume-with-0-05-0-05-0-05-spacing/2533)

<div class="topic-metadata">

**Author:** [@brhoom](https://discourse.slicer.org/u/brhoom)\
**Replies:** 2\
**Last updated:** [April 7, 2018, 6:18pm UTC](https://discourse.slicer.org/t/margin-size-and-shell-thickness-are-too-small-for-a-volume-with-0-05-0-05-0-05-spacing/2533 "2018-04-07T18:18:36Z")

</div>

I tried the new Segment Editor Hollow effect and the old Margin effect. I can not get good result because the smallest acceptable size and thinness is 0.8 mm (3x3x1 pixels). Why is that?

---

## [Automatically create labelmaps for all values of the custom LUT](https://discourse.slicer.org/t/automatically-create-labelmaps-for-all-values-of-the-custom-lut/2534)

<div class="topic-metadata">

**Author:** [@NaglisR](https://discourse.slicer.org/u/NaglisR)\
**Replies:** 2\
**Last updated:** [April 7, 2018, 5:39pm UTC](https://discourse.slicer.org/t/automatically-create-labelmaps-for-all-values-of-the-custom-lut/2534 "2018-04-07T17:39:32Z")

</div>

Hi, I have a volume that contains only values that are listed in my custom LUT (~70 different values representing anatomical structures): Example: I want to automatically create a labelmap, that would assign the va…

---

## [How can we export model(after segmentation) from 3d slicer to 3matic(mimics)?](https://discourse.slicer.org/t/how-can-we-export-model-after-segmentation-from-3d-slicer-to-3matic-mimics/2532)

<div class="topic-metadata">

**Author:** [@Bio\_Medical](https://discourse.slicer.org/u/Bio_Medical)\
**Replies:** 1\
**Last updated:** [April 6, 2018, 9:32pm UTC](https://discourse.slicer.org/t/how-can-we-export-model-after-segmentation-from-3d-slicer-to-3matic-mimics/2532 "2018-04-06T21:32:40Z")

</div>

How can we export model(after segmentation) from 3d slicer to 3matic(mimics)?

---

## [Custom axis values (vtkMRMLChartNode)](https://discourse.slicer.org/t/custom-axis-values-vtkmrmlchartnode/2116)

<div class="topic-metadata">

**Author:** [@fmarcano](https://discourse.slicer.org/u/fmarcano)\
**Replies:** 4\
**Last updated:** [April 6, 2018, 1:47pm UTC](https://discourse.slicer.org/t/custom-axis-values-vtkmrmlchartnode/2116 "2018-04-06T13:47:41Z")

</div>

From python, is it possible to reverse the order of X axis (vtkMRMLChartNode, vtkMRMLChartViewNode object nodes) on a displayed chart? For example: original X axis view: … -3 -2 -1 0 1 2 3 … required …

---

## [Get error code or success message in command line or in batch file or get a Log file](https://discourse.slicer.org/t/get-error-code-or-success-message-in-command-line-or-in-batch-file-or-get-a-log-file/2526)

<div class="topic-metadata">

**Author:** [@anandmulay3](https://discourse.slicer.org/u/anandmulay3)\
**Replies:** 1\
**Last updated:** [April 6, 2018, 1:26pm UTC](https://discourse.slicer.org/t/get-error-code-or-success-message-in-command-line-or-in-batch-file-or-get-a-log-file/2526 "2018-04-06T13:26:36Z")

</div>

Hello, I’m using batch file to call slicer scriptable module , what i need is after completion of task or failure due to error that error should come in CMD. Can you please help in this ?? Thanks,

---

## [vtkObjExporter- model down quality](https://discourse.slicer.org/t/vtkobjexporter-model-down-quality/2510)

<div class="topic-metadata">

**Author:** [@anandmulay3](https://discourse.slicer.org/u/anandmulay3)\
**Replies:** 4\
**Last updated:** [April 6, 2018, 8:18am UTC](https://discourse.slicer.org/t/vtkobjexporter-model-down-quality/2510 "2018-04-06T08:18:56Z")

</div>

I’m getting so down quality obj file, when i try to get it using vtkObjexporter i get this output, … And same model when i export it using segmentation exporter in slicer UI in latest slicer 4.9 am i missing any p…

---

## [Volume Rendering Issues](https://discourse.slicer.org/t/volume-rendering-issues/2513)

<div class="topic-metadata">

**Author:** [@ckuzi001](https://discourse.slicer.org/u/ckuzi001)\
**Replies:** 2\
**Last updated:** [April 6, 2018, 5:40am UTC](https://discourse.slicer.org/t/volume-rendering-issues/2513 "2018-04-06T05:40:36Z")

</div>

Hello everyone, I am trying to programmatically render a volume of a tumor in Python using the VolumeRendering class. There are four features (labels 1-4) that should each be associated with a unique color. I used a s…

---

## [Latest build - VTKv9 step requires git-lfs](https://discourse.slicer.org/t/latest-build-vtkv9-step-requires-git-lfs/2325)

<div class="topic-metadata">

**Author:** [@hherhold](https://discourse.slicer.org/u/hherhold)\
**Replies:** 3\
**Last updated:** [April 6, 2018, 12:33am UTC](https://discourse.slicer.org/t/latest-build-vtkv9-step-requires-git-lfs/2325 "2018-04-06T00:33:12Z")

</div>

It looks like the changes for VTKv9 require git-lfs to be installed (from HomeBrew on mac, at least). I can update the build docs to note this if this is a permanent change? Let me know. Thanks! -Hollister

---

## [I do not how to watch 2D images](https://discourse.slicer.org/t/i-do-not-how-to-watch-2d-images/2522)

<div class="topic-metadata">

**Author:** [@Neil\_Rozas\_Gaete](https://discourse.slicer.org/u/Neil_Rozas_Gaete)\
**Replies:** 1\
**Last updated:** [April 5, 2018, 8:06pm UTC](https://discourse.slicer.org/t/i-do-not-how-to-watch-2d-images/2522 "2018-04-05T20:06:57Z")

</div>

Operating system: Solus OS Slicer version: 4.8.1 Expected behavior: I want to my 2D images was showing in the way of I acquired them, some studies like Shoulder MRI I do somes axial due to the articulation itself, no t…

---

## [Importing segmentation different opacity](https://discourse.slicer.org/t/importing-segmentation-different-opacity/2515)

<div class="topic-metadata">

**Author:** [@JanWitowski](https://discourse.slicer.org/u/JanWitowski)\
**Replies:** 1\
**Last updated:** [April 5, 2018, 2:59pm UTC](https://discourse.slicer.org/t/importing-segmentation-different-opacity/2515 "2018-04-05T14:59:59Z")

</div>

Hi, I didn’t find this describe before so I thought I’ll discuss it here. When I’m working on a segmentation with multiple layers, always when I import it into the Slicer it sets random opacities to random (it seems rand…

---

## [Get POINTS and Polydata?](https://discourse.slicer.org/t/get-points-and-polydata/2512)

<div class="topic-metadata">

**Author:** [@MGM](https://discourse.slicer.org/u/MGM)\
**Replies:** 1\
**Last updated:** [April 4, 2018, 6:29pm UTC](https://discourse.slicer.org/t/get-points-and-polydata/2512 "2018-04-04T18:29:21Z")

</div>

Hello, I’m working on vtk, and I’m looking for a solution, to generate a vtk file, which contains, POINTS and Polydata. in others way, no need to SCALARS and NORMALS. I used " vtkPolyDataWriter ", to generate the vtk …

---

## [Working with large datasets](https://discourse.slicer.org/t/working-with-large-datasets/2469)

<div class="topic-metadata">

**Author:** [@arumiat](https://discourse.slicer.org/u/arumiat)\
**Replies:** 10\
**Last updated:** [April 4, 2018, 3:02pm UTC](https://discourse.slicer.org/t/working-with-large-datasets/2469 "2018-04-04T15:02:56Z")

</div>

Hi all, I have the luck of having some really nice high-res / microCT scans to work with. They are around the 1-2GB mark as original .dcms & if loaded into fijiJ show up as 16bit individual images. I can get the sizes do…

---

## [Multiple segment](https://discourse.slicer.org/t/multiple-segment/2493)

<div class="topic-metadata">

**Author:** [@anandmulay3](https://discourse.slicer.org/u/anandmulay3)\
**Replies:** 6\
**Last updated:** [April 4, 2018, 7:42am UTC](https://discourse.slicer.org/t/multiple-segment/2493 "2018-04-04T07:42:44Z")

</div>

i’m adding 2nd segment under same masterNode, But whenever i try to apply effects on it’s getting applied on 1st segment only, How to select 2nd segment as active segment???

---

## [How to suppress #Progress from c++ CLI](https://discourse.slicer.org/t/how-to-suppress-progress-from-c-cli/2504)

<div class="topic-metadata">

**Author:** [@kayarre](https://discourse.slicer.org/u/kayarre)\
**Replies:** 1\
**Last updated:** [April 4, 2018, 6:30am UTC](https://discourse.slicer.org/t/how-to-suppress-progress-from-c-cli/2504 "2018-04-04T06:30:13Z")

</div>

when runnning a command from c++ CLI, how can you suppress the #Progress: 0 meter? I can redirect to a file on linux, but I was curious if there a better way to deal with it? example command, "N4ITKBiasFieldCorrection…

---

## [Dicom image series loading issue](https://discourse.slicer.org/t/dicom-image-series-loading-issue/2501)

<div class="topic-metadata">

**Author:** [@anandmulay3](https://discourse.slicer.org/u/anandmulay3)\
**Replies:** 2\
**Last updated:** [April 4, 2018, 6:17am UTC](https://discourse.slicer.org/t/dicom-image-series-loading-issue/2501 "2018-04-04T06:17:02Z")

</div>

i have imported the image series into Dicom module , but when i try to load that series data i’m getting following error: Loading with imageIOName: GDCM Irregular volume geometry detected, but maximum error is within t…

---

## [Trouble with Extension Manager](https://discourse.slicer.org/t/trouble-with-extension-manager/2457)

<div class="topic-metadata">

**Author:** [@lsmith](https://discourse.slicer.org/u/lsmith)\
**Replies:** 8\
**Last updated:** [April 4, 2018, 5:18am UTC](https://discourse.slicer.org/t/trouble-with-extension-manager/2457 "2018-04-04T05:18:13Z")

</div>

I just downloaded 4.8.1 on my MacBook to test out the program for our work with DTI and tractography, and when I open the extension manager, it fails to load any of the extensions. It stops around 66% every time. I’ve tr…

---

## [Pre-selecting Foreground and Background Volumes](https://discourse.slicer.org/t/pre-selecting-foreground-and-background-volumes/2503)

<div class="topic-metadata">

**Author:** [@asheu](https://discourse.slicer.org/u/asheu)\
**Replies:** 3\
**Last updated:** [April 3, 2018, 10:36pm UTC](https://discourse.slicer.org/t/pre-selecting-foreground-and-background-volumes/2503 "2018-04-03T22:36:30Z")

</div>

I want to pre-select the background and foreground volumes manually. Like seen below, right now there are no volumes selected for the background and foreground layer. I have tried the following methods but even after …

---

## [Programmatically load transform apply to image and then save](https://discourse.slicer.org/t/programmatically-load-transform-apply-to-image-and-then-save/2505)

<div class="topic-metadata">

**Author:** [@kayarre](https://discourse.slicer.org/u/kayarre)\
**Replies:** 2\
**Last updated:** [April 3, 2018, 10:13pm UTC](https://discourse.slicer.org/t/programmatically-load-transform-apply-to-image-and-then-save/2505 "2018-04-03T22:13:40Z")

</div>

I am trying to automate parts of my workflow in Slicer, ( my mental model wants something like VMTK or the CLI where I can break the operations into smaller steps and add and rearrange as needed) I have figured out ho…

---

## [Customizing icons, module selection, Rendering settings etc for all users](https://discourse.slicer.org/t/customizing-icons-module-selection-rendering-settings-etc-for-all-users/2506)

<div class="topic-metadata">

**Author:** [@muratmaga](https://discourse.slicer.org/u/muratmaga)\
**Replies:** 1\
**Last updated:** [April 3, 2018, 10:09pm UTC](https://discourse.slicer.org/t/customizing-icons-module-selection-rendering-settings-etc-for-all-users/2506 "2018-04-03T22:09:58Z")

</div>

Hi, I am planning to deploy Slicer in on a multi-user workstation. I can customize module selection, GPU options etc for my users, but I don’t want all users to go through this first time they login or use Slicer. Is th…

---

## [python-real different from python interpreter](https://discourse.slicer.org/t/python-real-different-from-python-interpreter/2496)

<div class="topic-metadata">

**Author:** [@David\_Burns](https://discourse.slicer.org/u/David_Burns)\
**Replies:** 4\
**Last updated:** [April 3, 2018, 2:25pm UTC](https://discourse.slicer.org/t/python-real-different-from-python-interpreter/2496 "2018-04-03T14:25:56Z")

</div>

I have discovered that the python in bin/python-real is different from the python interactor compiled into Slicer Using the pre-combiled binaries on linux (both 4.9.0 and 4.8.1) - I have this problem. For instance in 4…

---

## [Slicer Extension Manager: User Interface Feedback](https://discourse.slicer.org/t/slicer-extension-manager-user-interface-feedback/2475)

<div class="topic-metadata">

**Author:** [@jcfr](https://discourse.slicer.org/u/jcfr)\
**Replies:** 18\
**Last updated:** [April 3, 2018, 2:23pm UTC](https://discourse.slicer.org/t/slicer-extension-manager-user-interface-feedback/2475 "2018-04-03T14:23:07Z")

</div>

Hi Slicers, During the past few months, we have been hard at work crafting what will be the new backend for managing Slicer (or Slicer-based) application and extension packages. Later today, @Pierre-Assemat and I will…

---

## [2018.04.03 Hangout](https://discourse.slicer.org/t/2018-04-03-hangout/3005)

<div class="topic-metadata">

**Author:** [@jcfr](https://discourse.slicer.org/u/jcfr)\
**Replies:** 0\
**Last updated:** [April 3, 2018, 6:52am UTC](https://discourse.slicer.org/t/2018-04-03-hangout/3005 "2018-04-03T06:52:06Z")

</div>

---

## [Shift in Volume Render - Better than I can segment bones](https://discourse.slicer.org/t/shift-in-volume-render-better-than-i-can-segment-bones/2488)

<div class="topic-metadata">

**Author:** [@brockgs](https://discourse.slicer.org/u/brockgs)\
**Replies:** 2\
**Last updated:** [April 1, 2018, 6:34pm UTC](https://discourse.slicer.org/t/shift-in-volume-render-better-than-i-can-segment-bones/2488 "2018-04-01T18:34:18Z")

</div>

Scenario: When I load a DICOM series of a head, If I go straight to Volume Render and use one of the bone presents, and then slide the “Shift” slider all the way to the right, I get an almost perfectly cleaned up view of…

---

## [Commit 69e26835e would burn my discrete GPU!](https://discourse.slicer.org/t/commit-69e26835e-would-burn-my-discrete-gpu/1839)

<div class="topic-metadata">

**Author:** [@chir.set](https://discourse.slicer.org/u/chir.set)\
**Replies:** 29\
**Last updated:** [April 1, 2018, 1:16am UTC](https://discourse.slicer.org/t/commit-69e26835e-would-burn-my-discrete-gpu/1839 "2018-04-01T01:16:24Z")

</div>

Since commit 69e26835e, Slicer freezes as soon as I move a Volume Rendering model when I use the discrete GPU of my laptop(DRI\_PRIME=1). Temperature increases to near 100°C until the system itself hangs with a noisy fan …

---

## [2018.03.06 Hangout](https://discourse.slicer.org/t/2018-03-06-hangout/3001)

<div class="topic-metadata">

**Author:** [@jcfr](https://discourse.slicer.org/u/jcfr)\
**Replies:** 2\
**Last updated:** [March 31, 2018, 8:19am UTC](https://discourse.slicer.org/t/2018-03-06-hangout/3001 "2018-03-31T08:19:12Z")

</div>

---

## [https://na-mic.github.io/ProjectWeek/PW28\_2018\_GranCanaria/](https://discourse.slicer.org/t/https-na-mic-github-io-projectweek-pw28-2018-grancanaria/2485)

<div class="topic-metadata">

**Author:** [@Tina\_Kapur](https://discourse.slicer.org/u/Tina_Kapur)\
**Replies:** 0\
**Last updated:** [March 31, 2018, 1:53am UTC](https://discourse.slicer.org/t/https-na-mic-github-io-projectweek-pw28-2018-grancanaria/2485 "2018-03-31T01:53:51Z")

</div>

Reminder that anyone interested in joining Project Week 28 in Gran Canaria should consider taking adavantage of the negotiated prices at the recommended hotels. Las Palmas GC receives many visitors, and prices could incr…

---

## [Why do I get build error "class vtkOBJExporter has no member named SetOBJFileComment" when building Slicer against Qt4?](https://discourse.slicer.org/t/why-do-i-get-build-error-class-vtkobjexporter-has-no-member-named-setobjfilecomment-when-building-slicer-against-qt4/2482)

<div class="topic-metadata">

**Author:** [@gaoyi.cn](https://discourse.slicer.org/u/gaoyi.cn)\
**Replies:** 1\
**Last updated:** [March 30, 2018, 11:14pm UTC](https://discourse.slicer.org/t/why-do-i-get-build-error-class-vtkobjexporter-has-no-member-named-setobjfilecomment-when-building-slicer-against-qt4/2482 "2018-03-30T23:14:38Z")

</div>

On linux mint/ubuntu 16.04, GCC 5.4.0 I got error: \[ 24%\] Building CXX object Libs/MRML/Core/CMakeFiles/MRMLCore.dir/vtkMRMLProceduralColorNode.cxx.o /home/gaoyi/usr/work/namic/rls20180330/Slicer/Libs/MRML/Core/vtkMRM…

---

## [Missing Modules in Segment Editor](https://discourse.slicer.org/t/missing-modules-in-segment-editor/2480)

<div class="topic-metadata">

**Author:** [@Giovanny.Casadiego](https://discourse.slicer.org/u/Giovanny.Casadiego)\
**Replies:** 1\
**Last updated:** [March 30, 2018, 7:35pm UTC](https://discourse.slicer.org/t/missing-modules-in-segment-editor/2480 "2018-03-30T19:35:02Z")

</div>

Hi Everyone, While watching the Hollow effect video, I could notice that I’m missing buttons in my Segment Editor. Any ideas? Thanks! G

---

## [Undefined symbol when run my CLI modules extensions](https://discourse.slicer.org/t/undefined-symbol-when-run-my-cli-modules-extensions/2393)

<div class="topic-metadata">

**Author:** [@brhoom](https://discourse.slicer.org/u/brhoom)\
**Replies:** 17\
**Last updated:** [March 30, 2018, 11:20am UTC](https://discourse.slicer.org/t/undefined-symbol-when-run-my-cli-modules-extensions/2393 "2018-03-30T11:20:40Z")

</div>

Operating system: Ubuntu 16 Slicer version: 4.8.1 Expected behavior: cli working Actual behavior: not working my cli extension are not working “anymore”. I get these errors: undefined symbol: \_ZN3itk13ProcessObject8…

---

## [Introducing SlicerBuildEnvironment project](https://discourse.slicer.org/t/introducing-slicerbuildenvironment-project/2465)

<div class="topic-metadata">

**Author:** [@jcfr](https://discourse.slicer.org/u/jcfr)\
**Replies:** 2\
**Last updated:** [March 30, 2018, 3:56am UTC](https://discourse.slicer.org/t/introducing-slicerbuildenvironment-project/2465 "2018-03-30T03:56:01Z")

</div>

overview To streamline the continuous integration and allow anyone to easily reproduce builds, we created a new project. Currently, it contains only a Docker directory that itself contain a sub-directory for each build e…

[Previous page](https://discourse.slicer.org/latest.md?page=602)

[Next page](https://discourse.slicer.org/latest.md?page=604)
