# Latest

**URL:** https://discourse.slicer.org/latest.md?page=92

[Latest](https://discourse.slicer.org/latest.md) · [Categories](https://discourse.slicer.org/categories.md) · [Tags](https://discourse.slicer.org/tags.md)

**Page:** 93

---

## [Tracker device error - Data collector configuration](https://discourse.slicer.org/t/tracker-device-error-data-collector-configuration/40034)

<div class="topic-metadata">

**Author:** [@jonortegav](https://discourse.slicer.org/u/jonortegav)\
**Replies:** 0\
**Last updated:** [November 5, 2024, 10:36am UTC](https://discourse.slicer.org/t/tracker-device-error-data-collector-configuration/40034 "2024-11-05T10:36:58Z")

</div>

Hi everyone, I’m attempting to perform spatial calibration with the PLUS Toolkit, but I keep running into issues, and I’m not entirely sure why. Initially, I suspected that the problem was due to the NDI Polaris Spectr…

---

## [BUG and spatial calibration in fCal](https://discourse.slicer.org/t/bug-and-spatial-calibration-in-fcal/39938)

<div class="topic-metadata">

**Author:** [@jonortegav](https://discourse.slicer.org/u/jonortegav)\
**Replies:** 3\
**Last updated:** [November 5, 2024, 8:34am UTC](https://discourse.slicer.org/t/bug-and-spatial-calibration-in-fcal/39938 "2024-11-05T08:34:38Z")

</div>

Hi, I’m experiencing an issue where fCal unexpectedly closes whenever I attempt to use the Spatial Calibration toolbox. I’m not sure why this is happening, and I haven’t been able to identify any specific error messages…

---

## [Extraction network get stucked](https://discourse.slicer.org/t/extraction-network-get-stucked/39767)

<div class="topic-metadata">

**Author:** [@gang\_fang](https://discourse.slicer.org/u/gang_fang)\
**Replies:** 1\
**Last updated:** [November 5, 2024, 3:28am UTC](https://discourse.slicer.org/t/extraction-network-get-stucked/39767 "2024-11-05T03:28:38Z")

</div>

Dear Developers, I Used the newest vmtk code and build based on VTK 9.1 . For major of the dataset work well for netowork extracion. But for serval cases , there existed stuck issues. I don’t know the reason if the surf…

---

## [Single acquisition is broken into many sections](https://discourse.slicer.org/t/single-acquisition-is-broken-into-many-sections/40027)

<div class="topic-metadata">

**Author:** [@CTuser](https://discourse.slicer.org/u/CTuser)\
**Replies:** 0\
**Last updated:** [November 5, 2024, 2:12am UTC](https://discourse.slicer.org/t/single-acquisition-is-broken-into-many-sections/40027 "2024-11-05T02:12:37Z")

</div>

Not sure why my scan is broken up into many “Acquisitions” that contain a handful of individual slices each. Usually these appear as one single file that has all the slices Operating system: Windows 11 Slicer versio…

---

## [Volume rendering file shows up as changed in Save dialog directly after opening an mrml scene](https://discourse.slicer.org/t/volume-rendering-file-shows-up-as-changed-in-save-dialog-directly-after-opening-an-mrml-scene/39979)

<div class="topic-metadata">

**Author:** [@MMMPPPMMM](https://discourse.slicer.org/u/MMMPPPMMM)\
**Replies:** 3\
**Last updated:** [November 4, 2024, 10:49pm UTC](https://discourse.slicer.org/t/volume-rendering-file-shows-up-as-changed-in-save-dialog-directly-after-opening-an-mrml-scene/39979 "2024-11-04T22:49:11Z")

</div>

Hello It seems to me like a bug that the \*.vp volume rendering file shows up as changed in Save dialog directly after opening an MRML scene? Find an example here: Upload Files | Free File Upload and Transfer Up To 10 G…

---

## [ Further Simplifying a Custom 3D Slicer Application: Removing Unneeded Modules and Adding Custom Modules](https://discourse.slicer.org/t/further-simplifying-a-custom-3d-slicer-application-removing-unneeded-modules-and-adding-custom-modules/40025)

<div class="topic-metadata">

**Author:** [@nih4t](https://discourse.slicer.org/u/nih4t)\
**Replies:** 0\
**Last updated:** [November 4, 2024, 10:48pm UTC](https://discourse.slicer.org/t/further-simplifying-a-custom-3d-slicer-application-removing-unneeded-modules-and-adding-custom-modules/40025 "2024-11-04T22:48:58Z")

</div>

Hello, I’ve successfully built a simplified version of 3D Slicer following this guide from Kitware (https://www.kitware.com/slicercat-creating-custom-applications-based-on-3d-slicer/). Hello, I’ve successfully built a…

---

## [Dicom-slicer- convert to s/w help](https://discourse.slicer.org/t/dicom-slicer-convert-to-s-w-help/40022)

<div class="topic-metadata">

**Author:** [@Newbie101](https://discourse.slicer.org/u/Newbie101)\
**Replies:** 0\
**Last updated:** [November 4, 2024, 7:15pm UTC](https://discourse.slicer.org/t/dicom-slicer-convert-to-s-w-help/40022 "2024-11-04T19:15:11Z")

</div>

Hi, I am needing some help please with a MRI spinal scan. I wish to convert the DICOM files into a usable format within solidworks.If it is an Assembly its not an issue, i can break it down by reverse eng. But this is c…

---

## [MicroCT tooth segmentation](https://discourse.slicer.org/t/microct-tooth-segmentation/40014)

<div class="topic-metadata">

**Author:** [@r\_dientes](https://discourse.slicer.org/u/r_dientes)\
**Replies:** 1\
**Last updated:** [November 4, 2024, 6:39pm UTC](https://discourse.slicer.org/t/microct-tooth-segmentation/40014 "2024-11-04T18:39:54Z")

</div>

Hello! I’m starting to segment microCT images and I wanted to segment separately enamel, dentin and pulp canal. My doubt arises from my still little experience and that I have Micro-CT images that are quite heavy for …

---

## [Slice intersection mouse interaction as default](https://discourse.slicer.org/t/slice-intersection-mouse-interaction-as-default/39980)

<div class="topic-metadata">

**Author:** [@racctor](https://discourse.slicer.org/u/racctor)\
**Replies:** 2\
**Last updated:** [November 4, 2024, 5:48pm UTC](https://discourse.slicer.org/t/slice-intersection-mouse-interaction-as-default/39980 "2024-11-04T17:48:07Z")

</div>

Dear all, I am new to 3D Slicer and have a problem ChatGPT clearling cant explain to me :wink: So help would be appreciated: I have a CT scan of my skull with the volume “10” series. I visualized the volume using volum…

---

## [Create an indipendent volumeNode for an organ obtained after segmentation](https://discourse.slicer.org/t/create-an-indipendent-volumenode-for-an-organ-obtained-after-segmentation/40018)

<div class="topic-metadata">

**Author:** [@Filippo\_Parronchi](https://discourse.slicer.org/u/Filippo_Parronchi)\
**Replies:** 1\
**Last updated:** [November 4, 2024, 4:25pm UTC](https://discourse.slicer.org/t/create-an-indipendent-volumenode-for-an-organ-obtained-after-segmentation/40018 "2024-11-04T16:25:45Z")

</div>

Good morning everyone, after applying the ‘totalSegmentator’ module, I obtained all my abdominal organs segmented. How can I now associate, for example, only my ‘liver’ object with a new volume node so that I can manage…

---

## [Fiducials configuration for spatial calibration with no streaming of 'StylusToProbe' transform](https://discourse.slicer.org/t/fiducials-configuration-for-spatial-calibration-with-no-streaming-of-stylustoprobe-transform/13326)

<div class="topic-metadata">

**Author:** [@AurelieS](https://discourse.slicer.org/u/AurelieS)\
**Replies:** 8\
**Last updated:** [November 4, 2024, 1:52pm UTC](https://discourse.slicer.org/t/fiducials-configuration-for-spatial-calibration-with-no-streaming-of-stylustoprobe-transform/13326 "2024-11-04T13:52:46Z")

</div>

Hi (again…), I am sorry for all the topics, 3D ultrasound is quite new for me and some aspects are still blurry… I followed your tutorial U31 for spatial calibration of my ultrasound probe. The problem is that the int…

---

## [ROI markup is not filled with color in coronal view in Slicer 5.6.0](https://discourse.slicer.org/t/roi-markup-is-not-filled-with-color-in-coronal-view-in-slicer-5-6-0/33341)

<div class="topic-metadata">

**Author:** [@Maya\_Kiperwas\_Gal](https://discourse.slicer.org/u/Maya_Kiperwas_Gal)\
**Replies:** 11\
**Last updated:** [November 4, 2024, 9:20am UTC](https://discourse.slicer.org/t/roi-markup-is-not-filled-with-color-in-coronal-view-in-slicer-5-6-0/33341 "2024-11-04T09:20:05Z")

</div>

Problem report for Slicer 5.6.0 win-amd64: ROI markup is not filled with color in coronal view 5.6.0 (revision 32390 / 0a13b9c) win-amd64 - installed release Windows / Professional / (Build 19045, Code Page 65001) - 6…

---

## [Cannot import DICOM data - Required information (patient name, patient ID, study instance UID) is missing from dataset](https://discourse.slicer.org/t/cannot-import-dicom-data-required-information-patient-name-patient-id-study-instance-uid-is-missing-from-dataset/40007)

<div class="topic-metadata">

**Author:** [@ggbrown](https://discourse.slicer.org/u/ggbrown)\
**Replies:** 1\
**Last updated:** [November 4, 2024, 2:39am UTC](https://discourse.slicer.org/t/cannot-import-dicom-data-required-information-patient-name-patient-id-study-instance-uid-is-missing-from-dataset/40007 "2024-11-04T02:39:27Z")

</div>

I’m using the latest version 5.6.2. It gave message “import completed: added 0 patients, 0 studies, 0 series, 0 instances”. When I clicked “Import DICOM files”, clicked into the directory having lots of .dcm files, it s…

---

## [Want to get exact geometrical features (includes some internal voids in the CT-scanned volume) with mesh for FE analysis via Abaqus.](https://discourse.slicer.org/t/want-to-get-exact-geometrical-features-includes-some-internal-voids-in-the-ct-scanned-volume-with-mesh-for-fe-analysis-via-abaqus/39993)

<div class="topic-metadata">

**Author:** [@SKarmakar](https://discourse.slicer.org/u/SKarmakar)\
**Replies:** 1\
**Last updated:** [November 3, 2024, 4:30pm UTC](https://discourse.slicer.org/t/want-to-get-exact-geometrical-features-includes-some-internal-voids-in-the-ct-scanned-volume-with-mesh-for-fe-analysis-via-abaqus/39993 "2024-11-03T16:30:54Z")

</div>

Hello everyone, By using a 3D slicer, I only have a surface mesh of a CT-scanned structure. However, The structure includes some internal defects like voids; hence, those details should be included in the structure whil…

---

## [Periodontal ligament (PDL) segmentation](https://discourse.slicer.org/t/periodontal-ligament-pdl-segmentation/31314)

<div class="topic-metadata">

**Author:** [@balakonvict](https://discourse.slicer.org/u/balakonvict)\
**Replies:** 6\
**Last updated:** [November 3, 2024, 12:32pm UTC](https://discourse.slicer.org/t/periodontal-ligament-pdl-segmentation/31314 "2024-11-03T12:32:03Z")

</div>

I have successfully segmented a tooth and maxilla from my imaging data. However, I am facing challenges with segmenting the periodontal ligament (PDL). I attempted to use shelling techniques to create the PDL, but unfort…

---

## [Get projection plane in 2D-3D Registration](https://discourse.slicer.org/t/get-projection-plane-in-2d-3d-registration/26023)

<div class="topic-metadata">

**Author:** [@domP](https://discourse.slicer.org/u/domP)\
**Replies:** 8\
**Last updated:** [November 3, 2024, 11:02am UTC](https://discourse.slicer.org/t/get-projection-plane-in-2d-3d-registration/26023 "2024-11-03T11:02:54Z")

</div>

Hello everybody, I’m trying to register a CT volume with a 2D XA (fluoroscopic image). My issue is to find the projection plane from CT volume that matches with the XA one using DICOM information of fluoroscopic image l…

---

## [How to export an individual .nrrd file for each segmented structure?](https://discourse.slicer.org/t/how-to-export-an-individual-nrrd-file-for-each-segmented-structure/39968)

<div class="topic-metadata">

**Author:** [@mitchellwiebe](https://discourse.slicer.org/u/mitchellwiebe)\
**Replies:** 2\
**Last updated:** [November 1, 2024, 9:07pm UTC](https://discourse.slicer.org/t/how-to-export-an-individual-nrrd-file-for-each-segmented-structure/39968 "2024-11-01T21:07:40Z")

</div>

Hi there, I’m working on a project where I will extract features from \>200 individuals across several structures (and for CT/dose). As part of the workflow, I feel that it would be most convenient to export a .nrrd file…

---

## [MONAI's MAISI on Slicer?](https://discourse.slicer.org/t/monais-maisi-on-slicer/39987)

<div class="topic-metadata">

**Author:** [@mau\_igna\_06](https://discourse.slicer.org/u/mau_igna_06)\
**Replies:** 0\
**Last updated:** [November 1, 2024, 8:48pm UTC](https://discourse.slicer.org/t/monais-maisi-on-slicer/39987 "2024-11-01T20:48:43Z")

</div>

Is there support for MAISI (state-of-the-art 3D Latent Diffusion Model for synthetic data generation) already on Slicer? If not, are there any on-going efforts to integrate it?

---

## [For qMRMLNodeComboBox, how can I restrict Sequence nodes by type?](https://discourse.slicer.org/t/for-qmrmlnodecombobox-how-can-i-restrict-sequence-nodes-by-type/39959)

<div class="topic-metadata">

**Author:** [@mikebind](https://discourse.slicer.org/u/mikebind)\
**Replies:** 3\
**Last updated:** [November 1, 2024, 8:18pm UTC](https://discourse.slicer.org/t/for-qmrmlnodecombobox-how-can-i-restrict-sequence-nodes-by-type/39959 "2024-11-01T20:18:41Z")

</div>

I am working on a module to process a 4D data set. It will need to take as inputs a sequence node of segmentations and a sequence node of tables. Also present in the scene will be (possibly multple) sequence nodes of i…

---

## [Rotate 3D subject while placing semilandmarks ](https://discourse.slicer.org/t/rotate-3d-subject-while-placing-semilandmarks/39976)

<div class="topic-metadata">

**Author:** [@Ruiqi-CUB](https://discourse.slicer.org/u/Ruiqi-CUB)\
**Replies:** 3\
**Last updated:** [November 1, 2024, 6:42pm UTC](https://discourse.slicer.org/t/rotate-3d-subject-while-placing-semilandmarks/39976 "2024-11-01T18:42:34Z")

</div>

I am using Slicer 5.6.2 on MacOS. I am working on 3D mesh file in stl format. I can’t see all the surface when placing semi-landmarks of a curve. Is there a way to rotate the subject WHILE placing semilandmarks? Right n…

---

## [Markup control point coordinate values are not automatically updated when switching between World and Local](https://discourse.slicer.org/t/markup-control-point-coordinate-values-are-not-automatically-updated-when-switching-between-world-and-local/39982)

<div class="topic-metadata">

**Author:** [@MMMPPPMMM](https://discourse.slicer.org/u/MMMPPPMMM)\
**Replies:** 1\
**Last updated:** [November 1, 2024, 3:02pm UTC](https://discourse.slicer.org/t/markup-control-point-coordinate-values-are-not-automatically-updated-when-switching-between-world-and-local/39982 "2024-11-01T15:02:57Z")

</div>

Hello When I switch between “World” and “Local” in the “Coordinates:” drop down list of the Control Points section of the Markups module, the coordinates are not automatically updated. As workaround one can use the “Pr…

---

## [Segmentation of heart according to intensity change in art vs venous phase](https://discourse.slicer.org/t/segmentation-of-heart-according-to-intensity-change-in-art-vs-venous-phase/39983)

<div class="topic-metadata">

**Author:** [@Bor\_Antolic](https://discourse.slicer.org/u/Bor_Antolic)\
**Replies:** 0\
**Last updated:** [November 1, 2024, 12:11pm UTC](https://discourse.slicer.org/t/segmentation-of-heart-according-to-intensity-change-in-art-vs-venous-phase/39983 "2024-11-01T12:11:22Z")

</div>

I have a cardiac CT that was done in arterious, venous and also late phase. Is there a way to take advantage of pixel intensity changes across these different phases to aid in automatic segment registration?

---

## [Two markupsROI (Cropping module)](https://discourse.slicer.org/t/two-markupsroi-cropping-module/39956)

<div class="topic-metadata">

**Author:** [@Dawid\_Szczawinski](https://discourse.slicer.org/u/Dawid_Szczawinski)\
**Replies:** 2\
**Last updated:** [October 31, 2024, 4:24pm UTC](https://discourse.slicer.org/t/two-markupsroi-cropping-module/39956 "2024-10-31T16:24:46Z")

</div>

Hello everyone! I try to create my own extension to using nnunetv2 model. First step is cropping data, because segmentation full file is not necessary and I have too little ram. So I try to cropp Volume using ROI. Is…

---

## [Position of the 3D image and its cross section do not match](https://discourse.slicer.org/t/position-of-the-3d-image-and-its-cross-section-do-not-match/39775)

<div class="topic-metadata">

**Author:** [@Haru](https://discourse.slicer.org/u/Haru)\
**Replies:** 22\
**Last updated:** [October 31, 2024, 1:07pm UTC](https://discourse.slicer.org/t/position-of-the-3d-image-and-its-cross-section-do-not-match/39775 "2024-10-31T13:07:23Z")

</div>

Nice to meet you. I am a student and my English is not good. Please forgive me. I have imported an X-ray CT image into 3Dslicer in DICOM file format and displayed it. I have imported 799 images sliced in the x-axis di…

---

## [How to elicit a ray and tangent to the ROI region (use a python script if possible)](https://discourse.slicer.org/t/how-to-elicit-a-ray-and-tangent-to-the-roi-region-use-a-python-script-if-possible/39954)

<div class="topic-metadata">

**Author:** [@hewanglan](https://discourse.slicer.org/u/hewanglan)\
**Replies:** 2\
**Last updated:** [October 31, 2024, 11:55am UTC](https://discourse.slicer.org/t/how-to-elicit-a-ray-and-tangent-to-the-roi-region-use-a-python-script-if-possible/39954 "2024-10-31T11:55:51Z")

</div>

Operating system:windows 64 bit Slicer version:5.7.0 Expected behavior: Actual behavior:

---

## [Exporting surface model after applying transformation](https://discourse.slicer.org/t/exporting-surface-model-after-applying-transformation/39935)

<div class="topic-metadata">

**Author:** [@mdhan](https://discourse.slicer.org/u/mdhan)\
**Replies:** 3\
**Last updated:** [October 31, 2024, 10:40am UTC](https://discourse.slicer.org/t/exporting-surface-model-after-applying-transformation/39935 "2024-10-31T10:40:33Z")

</div>

Hello, I am having trouble with some features of Slicer, and would be grateful for advice. Images are copied for reference. I have 3 models - 1) Initial (Green), 2) Final (Yellow), 3) Shell (Purple) What I am trying…

---

## [Automatically Centering 3D View in 3D Slicer](https://discourse.slicer.org/t/automatically-centering-3d-view-in-3d-slicer/39950)

<div class="topic-metadata">

**Author:** [@huwqchn](https://discourse.slicer.org/u/huwqchn)\
**Replies:** 1\
**Last updated:** [October 31, 2024, 9:55am UTC](https://discourse.slicer.org/t/automatically-centering-3d-view-in-3d-slicer/39950 "2024-10-31T09:55:26Z")

</div>

Hi everyone, I’m trying to make the 3D view automatically center whenever a new object is added. My current code mostly works but fails when I hide the 3D box and axis. Here’s what I have: layoutManager = slicer.app.la…

---

## [Converting STL file to TIFF stack](https://discourse.slicer.org/t/converting-stl-file-to-tiff-stack/39855)

<div class="topic-metadata">

**Author:** [@nagda95](https://discourse.slicer.org/u/nagda95)\
**Replies:** 2\
**Last updated:** [October 31, 2024, 9:37am UTC](https://discourse.slicer.org/t/converting-stl-file-to-tiff-stack/39855 "2024-10-31T09:37:29Z")

</div>

Hello, I am attempting to convert an STL file containing spherical-like particles into a stack of TIFF image files using the code provided by @lassoan in this thread discussion: I was able to run the code in 3D Slicer…

---

## [Moving segmentation](https://discourse.slicer.org/t/moving-segmentation/14886)

<div class="topic-metadata">

**Author:** [@tenzin\_kunkyab](https://discourse.slicer.org/u/tenzin_kunkyab)\
**Replies:** 14\
**Last updated:** [October 31, 2024, 3:14am UTC](https://discourse.slicer.org/t/moving-segmentation/14886 "2024-10-31T03:14:34Z")

</div>

Operating system: Mac OS Slicer version: 4.11.0 Hi all, I am wondering if there is a functionality in 3d slicer where I can move the segmentation in terms of its location? I am basically creating cube segmentation of …

---

## [Lost ability to interact with closedCurves in preview](https://discourse.slicer.org/t/lost-ability-to-interact-with-closedcurves-in-preview/37134)

<div class="topic-metadata">

**Author:** [@muratmaga](https://discourse.slicer.org/u/muratmaga)\
**Replies:** 7\
**Last updated:** [October 30, 2024, 9:11pm UTC](https://discourse.slicer.org/t/lost-ability-to-interact-with-closedcurves-in-preview/37134 "2024-10-30T21:11:02Z")

</div>

In the latest previews, I cannot seem to highlight a curve by hovering over it, if the curve is drawn on a model. This breaks the ability to add points to the curve in selected regions. In the latest stable (5.6.2) this…

[Previous page](https://discourse.slicer.org/latest.md?page=91)

[Next page](https://discourse.slicer.org/latest.md?page=93)
