# Abnormal output of Extended Analysis results in Lung CT Analyzer

**URL:** https://discourse.slicer.org/t/abnormal-output-of-extended-analysis-results-in-lung-ct-analyzer/41795
**Category:** Support
**Created:** [February 20, 2025, 11:12pm UTC](https://discourse.slicer.org/t/abnormal-output-of-extended-analysis-results-in-lung-ct-analyzer/41795 "2025-02-20T23:12:13Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![yhty1898](https://avatars.discourse-cdn.com/v4/letter/y/f04885/32.png) [@yhty1898](https://discourse.slicer.org/u/yhty1898)
#### Post date: [February 20, 2025, 11:12pm UTC](https://discourse.slicer.org/t/abnormal-output-of-extended-analysis-results-in-lung-ct-analyzer/41795/1 "2025-02-20T23:12:13Z")

</div>

Excuse me! I’m encountering an issue with the Lung CT Analyzer module in 3D Slicer. After running the analysis, the **Volumetric Analysis (Table 1)** contains data, but the **Extended Analysis (Table 2)** is completely empty, showing all zeros. What could potentially cause this problem?

 ![Snipaste_2025-02-21_00-30-07](https://us1.discourse-cdn.com/flex002/uploads/slicer/original/3X/7/6/76a7ffc9b38efdb9a81ea0d938d9547f645f7fe9.png)

---

<div class="post-metadata">

### Author: ![LukasR](https://avatars.discourse-cdn.com/v4/letter/l/d78d45/32.png) [@LukasR](https://discourse.slicer.org/u/LukasR)
#### Post date: [March 6, 2025, 5:19pm UTC](https://discourse.slicer.org/t/abnormal-output-of-extended-analysis-results-in-lung-ct-analyzer/41795/2 "2025-03-06T17:19:38Z")

</div>

Hello,  
I’ve got the exact same problem. The PDF report of Lung CT Analyzer is not showing the “Extended analysis” results, only in zeros.  
Dear supporters, is there some fix for that please? I’m working on my final thesis right now so I’d be grateful for a prompt response.