# apply a deformable registration from a REG-DICOM file
**URL:** https://discourse.slicer.org/t/apply-a-deformable-registration-from-a-reg-dicom-file/23329
**Category:** Support
**Created:** [May 8, 2022, 2:05am UTC](https://discourse.slicer.org/t/apply-a-deformable-registration-from-a-reg-dicom-file/23329 "2022-05-08T02:05:26Z")
**Posts on this page:** 6
**Page:** 1
### Author:  [@ssm](https://discourse.slicer.org/u/ssm)
#### Post date: [May 8, 2022, 2:05am UTC](https://discourse.slicer.org/t/apply-a-deformable-registration-from-a-reg-dicom-file/23329/1 "2022-05-08T02:05:27Z")
Hi,
the Transforms module is only capable of creating new volumes from a REG-DICOM import for registration done in Velocity or Eclipse but not for deformable registrations.
Could you help me?
---
### Author:  [@lassoan](https://discourse.slicer.org/u/lassoan)
#### Post date: [May 8, 2022, 4:27am UTC](https://discourse.slicer.org/t/apply-a-deformable-registration-from-a-reg-dicom-file/23329/2 "2022-05-08T04:27:17Z")
If you install SlicerRT extension then you can load both DICOM `Spatial Registration Object` and `Deformable Spatial Registration Object` IODs. If you have any trouble loading registration objects using latest Slicer Preview Release and SlicerRT then please share a sample data set (preferably phantom data) and we can investigate.
---
### Author:  [@ssm](https://discourse.slicer.org/u/ssm)
#### Post date: [May 9, 2022, 8:45am UTC](https://discourse.slicer.org/t/apply-a-deformable-registration-from-a-reg-dicom-file/23329/3 "2022-05-09T08:45:42Z")
I runned the Transforms module after installing the SlicerRT (slicer version 5.1.0.2022-05-04).
The BRAINS resample Image module was unable to create deformed new volumes, too
How could I upload anonymized files
sebastià
---
### Author:  [@lassoan](https://discourse.slicer.org/u/lassoan)
#### Post date: [May 9, 2022, 11:31am UTC](https://discourse.slicer.org/t/apply-a-deformable-registration-from-a-reg-dicom-file/23329/4 "2022-05-09T11:31:30Z")
You can upload files anywhere (dropbox, OneDrive, Google drive, etc) and post the link here. Thank you!
---
### Author:  [@ssm](https://discourse.slicer.org/u/ssm)
#### Post date: [May 16, 2022, 6:30am UTC](https://discourse.slicer.org/t/apply-a-deformable-registration-from-a-reg-dicom-file/23329/5 "2022-05-16T06:30:00Z")
I’ve just uploaded the files to dropbox in order to share them with you
(they
[https://www.dropbox.com/scl/fo/wo5x2fg8g4n5vn632a3ty/h?dl=0&rlkey=uv2elizkwnfhqfvw0ortkcrtt](https://www.dropbox.com/scl/fo/wo5x2fg8g4n5vn632a3ty/h?dl=0&rlkey=uv2elizkwnfhqfvw0ortkcrtt)
sebastià
---
### Author:  [@lassoan](https://discourse.slicer.org/u/lassoan)
#### Post date: [May 29, 2022, 3:40am UTC](https://discourse.slicer.org/t/apply-a-deformable-registration-from-a-reg-dicom-file/23329/6 "2022-05-29T03:40:35Z")
As far as I can tell, Slicer loads the deformable registration correctly. However, you don’t see any displacement because the displacement vector components are between -0.0505mm and 0.0245mm, which is about 20x smaller than a voxel. So, the displacements in this DICOM SRO deformable transformation information object (REG1.2.246.352.222.400.710025541.11064.1651650814.936.dcm) are practically all zeros. That’s why you don’t see any difference when you apply it to an image.