# Bone segmentation to create 3D-printable STL

**URL:** https://discourse.slicer.org/t/bone-segmentation-to-create-3d-printable-stl/960
**Category:** Support
**Created:** [August 28, 2017, 1:43pm UTC](https://discourse.slicer.org/t/bone-segmentation-to-create-3d-printable-stl/960 "2017-08-28T13:43:59Z")
**Posts on this page:** 1
**Showing post:** 5

<div class="post-metadata">

### Author: ![Hanaana](https://avatars.discourse-cdn.com/v4/letter/h/9dc877/32.png) [@Hanaana](https://discourse.slicer.org/u/Hanaana)
#### Post date: [August 31, 2017, 3:05pm UTC](https://discourse.slicer.org/t/bone-segmentation-to-create-3d-printable-stl/960/5 "2017-08-31T15:05:02Z")

</div>

Prof. Doc. Andras,  
Dear Everyone,

I was writing back to you . I have fixed the stl export issue. I used  
segmentaions module\>export,models\>export. and finally could save it as a  
stl file.

Thank you again Professor for the support.

All the best,

Hanaa

 ![image](https://us1.discourse-cdn.com/flex002/uploads/slicer/original/3X/f/8/f8221859b64bb3489a001570df8f497b14ca66c9.png)

 ![image](https://us1.discourse-cdn.com/flex002/uploads/slicer/original/3X/4/5/45f11c2395b0f038ce308a544dbe05f1d4ef67e2.png)

---

_[View the full topic](https://discourse.slicer.org/t/bone-segmentation-to-create-3d-printable-stl/960)._