# Can not find modules in Slicer

**URL:** <https://discourse.slicer.org/t/can-not-find-modules-in-slicer/11941>\
**Category:** Support\
**Created:** [June 9, 2020, 2:41am UTC](https://discourse.slicer.org/t/can-not-find-modules-in-slicer/11941 "2020-06-09T02:41:12Z")\
**Posts on this page:** 10\
**Page:** 1

<div class="post-metadata">

**Author:** ![doc-xie](https://avatars.discourse-cdn.com/v4/letter/d/c77e96/32.png) [@doc-xie](https://discourse.slicer.org/u/doc-xie)\
**Post date:** [June 9, 2020, 2:41am UTC](https://discourse.slicer.org/t/can-not-find-modules-in-slicer/11941/1 "2020-06-09T02:41:12Z")

</div>

Hi everyone,  
I remember there is a module named Creatmodels in Slicer which can create a cube or a ball and the size can be set manually. But it can not be found in Slicer recently. Is there any other module can perform the task now?  
Best wishes,  
Xie

---

<div class="post-metadata">

**Author:** ![muratmaga](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.slicer.org/muratmaga/32/3622_2.png) [@muratmaga](https://discourse.slicer.org/u/muratmaga)\
**Post date:** [June 9, 2020, 4:03am UTC](https://discourse.slicer.org/t/can-not-find-modules-in-slicer/11941/2 "2020-06-09T04:03:33Z")

</div>

It is in the SlicerIGT extension.

---

<div class="post-metadata">

**Author:** ![doc-xie](https://avatars.discourse-cdn.com/v4/letter/d/c77e96/32.png) [@doc-xie](https://discourse.slicer.org/u/doc-xie)\
**Post date:** [June 9, 2020, 7:06am UTC](https://discourse.slicer.org/t/can-not-find-modules-in-slicer/11941/3 "2020-06-09T07:06:39Z")

</div>

Hi muratmaga,  
What in SlicerIGT is Markups to model, fiducials should be set for model make. I want create a cube or a ball with diameter setting.  
Best wishes,  
Xie

---

<div class="post-metadata">

**Author:** ![pieper](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.slicer.org/pieper/32/8_2.png) [@pieper](https://discourse.slicer.org/u/pieper)\
**Post date:** [June 9, 2020, 12:58pm UTC](https://discourse.slicer.org/t/can-not-find-modules-in-slicer/11941/4 "2020-06-09T12:58:21Z")

</div>

Hi @doc-xie -

I know it’s not as convenient as a gui module, but you get a lot of powerful options if you use python for a task like that. There are lots of classes like `vtkConeSource`, `vtkPlaneSoure` and others expose many useful controls that would get overwhelming in a gui.

[https://www.slicer.org/wiki/Documentation/Nightly/ScriptRepository#Show\_a\_simple\_surface\_mesh\_as\_a\_model\_node](https://www.slicer.org/wiki/Documentation/Nightly/ScriptRepository#Show_a_simple_surface_mesh_as_a_model_node)

---

<div class="post-metadata">

**Author:** ![lassoan](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.slicer.org/lassoan/32/13_2.png) [@lassoan](https://discourse.slicer.org/u/lassoan)\
**Post date:** [June 9, 2020, 1:08pm UTC](https://discourse.slicer.org/t/can-not-find-modules-in-slicer/11941/5 "2020-06-09T13:08:58Z")

</div>

“Create models” module show up in IGT category in the module list after you install SlicerIGT extension:

 ![image](https://us1.discourse-cdn.com/flex002/uploads/slicer/original/3X/b/4/b4e13ff1700a31bc9d56492b4d3900baff50e447.png)

---

<div class="post-metadata">

**Author:** ![doc-xie](https://avatars.discourse-cdn.com/v4/letter/d/c77e96/32.png) [@doc-xie](https://discourse.slicer.org/u/doc-xie)\
**Post date:** [June 10, 2020, 1:55am UTC](https://discourse.slicer.org/t/can-not-find-modules-in-slicer/11941/6 "2020-06-10T01:55:53Z")

</div>

Hi Lassoan,  
SlicerIGT had been installed in 3D Slicer(4.10.0), but “Create models” do not show up in the list.

 ![Screen Shot 2020-06-10 at 9.50.27 AM](https://us1.discourse-cdn.com/flex002/uploads/slicer/original/3X/e/7/e71d0bcf837fb8abf459d838d21e8d0e8f1639e6.png)  
Is it the reason about the version of Slicer?  
Best wishes,  
Xie

---

<div class="post-metadata">

**Author:** ![lassoan](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.slicer.org/lassoan/32/13_2.png) [@lassoan](https://discourse.slicer.org/u/lassoan)\
**Post date:** [June 10, 2020, 1:59am UTC](https://discourse.slicer.org/t/can-not-find-modules-in-slicer/11941/7 "2020-06-10T01:59:38Z")

</div>

Only latest Slicer Stable Release (4.10.2) and latest Slicer Preview Release (4.11.x) are supported. CreateModels module should be available for both.

---

<div class="post-metadata">

**Author:** ![doc-xie](https://avatars.discourse-cdn.com/v4/letter/d/c77e96/32.png) [@doc-xie](https://discourse.slicer.org/u/doc-xie)\
**Post date:** [June 10, 2020, 2:05am UTC](https://discourse.slicer.org/t/can-not-find-modules-in-slicer/11941/8 "2020-06-10T02:05:44Z")

</div>

Hi Steve,  
Thank you very much. I will try the code you advice.  
Best wishes,  
Xie

---

<div class="post-metadata">

**Author:** ![KatS](https://avatars.discourse-cdn.com/v4/letter/k/a8b319/32.png) [@KatS](https://discourse.slicer.org/u/KatS)\
**Post date:** [August 19, 2020, 8:51am UTC](https://discourse.slicer.org/t/can-not-find-modules-in-slicer/11941/9 "2020-08-19T08:51:26Z")

</div>

Dear all,

I have a similar problem: after installing the SlicerIGT Extension on Slicer 4.10.2 r28257, I only have the Fiducial-Module Registration, Model Registration and Viewpoint modules available.  
All other modules are not displayed, but I would like to use them. It wasn’t a problem when installing SlicerIGT on Slicer 4.10.1 version recently. Are the other modules not available for 4.10.2?

---

<div class="post-metadata">

**Author:** ![lassoan](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.slicer.org/lassoan/32/13_2.png) [@lassoan](https://discourse.slicer.org/u/lassoan)\
**Post date:** [August 19, 2020, 12:06pm UTC](https://discourse.slicer.org/t/can-not-find-modules-in-slicer/11941/10 "2020-08-19T12:06:13Z")

</div>

Does everything work fine in latest Slicer Preview Release?