# Combining three scans to one stl/model

**URL:** <https://discourse.slicer.org/t/combining-three-scans-to-one-stl-model/32988>\
**Category:** Support\
**Created:** [November 23, 2023, 8:44pm UTC](https://discourse.slicer.org/t/combining-three-scans-to-one-stl-model/32988 "2023-11-23T20:44:24Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Mossy6699](https://avatars.discourse-cdn.com/v4/letter/m/b4bc9f/32.png) [@Mossy6699](https://discourse.slicer.org/u/Mossy6699)\
**Post date:** [November 23, 2023, 8:44pm UTC](https://discourse.slicer.org/t/combining-three-scans-to-one-stl-model/32988/1 "2023-11-23T20:44:24Z")

</div>

Hello, i have just importet the scan set from a recent mri, but on every scan, just one axis is good. how or even can i combine 3 scans to one?  
when i try to create a model now, it is blocky, because only one axis is good.  
(i have 8 scan sets)

 ![image](https://us1.discourse-cdn.com/flex002/uploads/slicer/original/3X/8/f/8ff7e74e80d4083e1693bf53ec23398216d40b7b.jpeg)

 ![image](https://us1.discourse-cdn.com/flex002/uploads/slicer/original/3X/2/e/2e53d77f8f7bc8cfea7ab0e0ba1ff6bea8818d98.jpeg)