# Correction to SlicerIGT slide U05

**URL:** <https://discourse.slicer.org/t/correction-to-slicerigt-slide-u05/4404>\
**Category:** Development\
**Created:** [October 15, 2018, 8:36pm UTC](https://discourse.slicer.org/t/correction-to-slicerigt-slide-u05/4404 "2018-10-15T20:36:32Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![kamrul079](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.slicer.org/kamrul079/32/2059_2.png) [@kamrul079](https://discourse.slicer.org/u/kamrul079)\
**Post date:** [October 15, 2018, 8:36pm UTC](https://discourse.slicer.org/t/correction-to-slicerigt-slide-u05/4404/1 "2018-10-15T20:36:32Z")

</div>

SlicerIGT tutorial U05- Command Line Interface has an issue. I tried several times as it has been mentioned about “EditSeqMetafile”. But there is no such file in the PlusServer bin folder.

Correction: “EditSequenceFile”

---

<div class="post-metadata">

**Author:** ![jamesobutler](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.slicer.org/jamesobutler/32/7511_2.png) [@jamesobutler](https://discourse.slicer.org/u/jamesobutler)\
**Post date:** [October 15, 2018, 8:59pm UTC](https://discourse.slicer.org/t/correction-to-slicerigt-slide-u05/4404/2 "2018-10-15T20:59:34Z")

</div>

You are correct. The executable in the Plus toolkit is now called EditSequenceFile.exe.

On the SlicerIGT website it says

> Note that this course will remain under constant development. If you notice any mistakes, or have any suggestions on how to improve it, please **[contact us](http://www.slicerigt.org/wp/contact/)**.

You might want to go through that contact since it is probably a more direct way for requesting the tutorial to be updated.

---

<div class="post-metadata">

**Author:** ![kamrul079](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.slicer.org/kamrul079/32/2059_2.png) [@kamrul079](https://discourse.slicer.org/u/kamrul079)\
**Post date:** [October 15, 2018, 9:11pm UTC](https://discourse.slicer.org/t/correction-to-slicerigt-slide-u05/4404/3 "2018-10-15T21:11:06Z")

</div>

> [@kamrul079](#):
>
> SlicerIGT tutorial U05- Command Line Interface has an issue. I tried several times as it has been mentioned about “EditSeqMetafile”. But there is no such file in the PlusServer bin folder.
> 
> Correction: “EditSequenceFile”

Thank you and I will do that

---

<div class="post-metadata">

**Author:** ![lassoan](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.slicer.org/lassoan/32/13_2.png) [@lassoan](https://discourse.slicer.org/u/lassoan)\
**Post date:** [October 16, 2018, 4:44pm UTC](https://discourse.slicer.org/t/correction-to-slicerigt-slide-u05/4404/4 "2018-10-16T16:44:08Z")

</div>

SlicerIGT tutorial U05 and associated .bat files in SlicerIGT-Data have now been updated to use the new name (EditSequenceFile).

---

<div class="post-metadata">

**Author:** ![kamrul079](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.slicer.org/kamrul079/32/2059_2.png) [@kamrul079](https://discourse.slicer.org/u/kamrul079)\
**Post date:** [October 16, 2018, 7:13pm UTC](https://discourse.slicer.org/t/correction-to-slicerigt-slide-u05/4404/5 "2018-10-16T19:13:06Z")

</div>

Appreciate. Thank you