# create model from 360 scan?

**URL:** <https://discourse.slicer.org/t/create-model-from-360-scan/28601>\
**Category:** Support\
**Created:** [March 27, 2023, 6:05pm UTC](https://discourse.slicer.org/t/create-model-from-360-scan/28601 "2023-03-27T18:05:27Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![studyskin](https://avatars.discourse-cdn.com/v4/letter/s/82dd89/32.png) [@studyskin](https://discourse.slicer.org/u/studyskin)\
**Post date:** [March 27, 2023, 6:05pm UTC](https://discourse.slicer.org/t/create-model-from-360-scan/28601/1 "2023-03-27T18:05:27Z")

</div>

hi, i downloaded this scan from morphosource but it is taken in 360 not usual slices but was called a ct scan, i dont imagine there is but is there a way to turn this into a model? thank you

[https://drive.google.com/drive/folders/1\_VRi\_lN2o1xEYSDEFfouR-Bf6TiZrG\_h?usp=sharing](https://drive.google.com/drive/folders/1_VRi_lN2o1xEYSDEFfouR-Bf6TiZrG_h?usp=sharing)

---

<div class="post-metadata">

**Author:** ![lassoan](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.slicer.org/lassoan/32/13_2.png) [@lassoan](https://discourse.slicer.org/u/lassoan)\
**Post date:** [March 27, 2023, 6:16pm UTC](https://discourse.slicer.org/t/create-model-from-360-scan/28601/2 "2023-03-27T18:16:14Z")

</div>

You can use [RTK](https://www.kitware.com/rtk-the-reconstruction-toolkit/) to reconstruct a Cartesian image from a set of projection images. There is no GUI for using RTK in Slicer, but if you need to do this kind of reconstructions frequently then you may consider adding a module for it.

---

<div class="post-metadata">

**Author:** ![muratmaga](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.slicer.org/muratmaga/32/3622_2.png) [@muratmaga](https://discourse.slicer.org/u/muratmaga)\
**Post date:** [March 27, 2023, 6:45pm UTC](https://discourse.slicer.org/t/create-model-from-360-scan/28601/3 "2023-03-27T18:45:02Z")

</div>

This is not what’s usually posted on MorphoSource. You can contact MorphoSource and/or the data owner, and ask if they can provide the reconstructed slice data. They probably upload this by mistake.

---

<div class="post-metadata">

**Author:** ![Jed](https://avatars.discourse-cdn.com/v4/letter/j/34f0e0/32.png) [@Jed](https://discourse.slicer.org/u/Jed)\
**Post date:** [March 28, 2023, 8:04am UTC](https://discourse.slicer.org/t/create-model-from-360-scan/28601/4 "2023-03-28T08:04:38Z")

</div>

I 3D printed my CT scans of my spine,