# Creating fibular cutting guide and saved data

**URL:** <https://discourse.slicer.org/t/creating-fibular-cutting-guide-and-saved-data/41208>\
**Category:** Support\
**Created:** [January 22, 2025, 5:24am UTC](https://discourse.slicer.org/t/creating-fibular-cutting-guide-and-saved-data/41208 "2025-01-22T05:24:49Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Enkh-Orchlon\_Batbaya](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.slicer.org/enkh-orchlon_batbaya/32/79162_2.png) [@Enkh-Orchlon\_Batbaya](https://discourse.slicer.org/u/Enkh-Orchlon_Batbaya)\
**Post date:** [January 22, 2025, 5:24am UTC](https://discourse.slicer.org/t/creating-fibular-cutting-guide-and-saved-data/41208/1 "2025-01-22T05:24:50Z")

</div>

Dear All,  
I have working on this case couple days, and finally able to plan fibula cutiing guide. However, after creating the guide using boolean operation and saved it as STL file, I could not see any miter box and holes on my final guide.  
Could you please help me to figure out this problem. Thank you very much.

 ![Screenshot 2025-01-22 131754](https://us1.discourse-cdn.com/flex002/uploads/slicer/original/3X/c/b/cbbffaf20511271101c1546da2914e3d527b6216.jpeg)  
 ![Screenshot 2025-01-22 131813](https://us1.discourse-cdn.com/flex002/uploads/slicer/original/3X/e/d/edba28896849fbd9fbadfdbd198a532510fc9881.png)

---

<div class="post-metadata">

**Author:** ![nadayoda59](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.slicer.org/nadayoda59/32/78902_2.png) [@nadayoda59](https://discourse.slicer.org/u/nadayoda59)\
**Post date:** [January 22, 2025, 8:24am UTC](https://discourse.slicer.org/t/creating-fibular-cutting-guide-and-saved-data/41208/2 "2025-01-22T08:24:10Z")

</div>

i think use segmentation editor’s “logical operator”

---

<div class="post-metadata">

**Author:** ![Enkh-Orchlon\_Batbaya](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.slicer.org/enkh-orchlon_batbaya/32/79162_2.png) [@Enkh-Orchlon\_Batbaya](https://discourse.slicer.org/u/Enkh-Orchlon_Batbaya)\
**Post date:** [January 22, 2025, 11:40am UTC](https://discourse.slicer.org/t/creating-fibular-cutting-guide-and-saved-data/41208/3 "2025-01-22T11:40:02Z")

</div>

Thank you for your kind reply. But in the segmenatation editor I am not able to see the final guide. I think the final guide is in the extention called Bone recontruction planner and unable to use logical operator option.

---

<div class="post-metadata">

**Author:** ![nadayoda59](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.slicer.org/nadayoda59/32/78902_2.png) [@nadayoda59](https://discourse.slicer.org/u/nadayoda59)\
**Post date:** [January 23, 2025, 1:13am UTC](https://discourse.slicer.org/t/creating-fibular-cutting-guide-and-saved-data/41208/4 "2025-01-23T01:13:47Z")

</div>

i think if miter box and holes is not “Segmentation” in Data menu, convert “Segmentation” form. and try Logical operator

---

<div class="post-metadata">

**Author:** ![mau\_igna\_06](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.slicer.org/mau_igna_06/32/9056_2.png) [@mau\_igna\_06](https://discourse.slicer.org/u/mau_igna_06)\
**Post date:** [January 24, 2025, 6:11pm UTC](https://discourse.slicer.org/t/creating-fibular-cutting-guide-and-saved-data/41208/5 "2025-01-24T18:11:55Z")

</div>

Hi

If the problem has not been solved yet, please provide a saved scene (.mrb file) that shows the problem and I may be able to give a solution

Best wishes,  
Mauro