# Dicom image series loading issue

**URL:** <https://discourse.slicer.org/t/dicom-image-series-loading-issue/2501>\
**Category:** Development\
**Created:** [April 3, 2018, 12:59pm UTC](https://discourse.slicer.org/t/dicom-image-series-loading-issue/2501 "2018-04-03T12:59:09Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![anandmulay3](https://avatars.discourse-cdn.com/v4/letter/a/ac8455/32.png) [@anandmulay3](https://discourse.slicer.org/u/anandmulay3)\
**Post date:** [April 3, 2018, 12:59pm UTC](https://discourse.slicer.org/t/dicom-image-series-loading-issue/2501/1 "2018-04-03T12:59:09Z")

</div>

i have imported the image series into Dicom module , but when i try to load that series data i’m getting following error:

Loading with imageIOName: GDCM  
Irregular volume geometry detected, but maximum error is within tolerance (maximum error of 2.44141e-05 mm, tolerance threshold is 0.001 mm).  
ut maximum error is within tolerance (maximum error of 2.44141e-05 mm, tolerance threshold is 0.001 mm).

---

<div class="post-metadata">

**Author:** ![pieper](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.slicer.org/pieper/32/8_2.png) [@pieper](https://discourse.slicer.org/u/pieper)\
**Post date:** [April 3, 2018, 1:46pm UTC](https://discourse.slicer.org/t/dicom-image-series-loading-issue/2501/2 "2018-04-03T13:46:04Z")

</div>

> [@anandmulay3](#):
>
> maximum error is within tolerance

This is just a warning and the data should load anyway. If it’s not loading there’s some other issue.

---

<div class="post-metadata">

**Author:** ![anandmulay3](https://avatars.discourse-cdn.com/v4/letter/a/ac8455/32.png) [@anandmulay3](https://discourse.slicer.org/u/anandmulay3)\
**Post date:** [April 4, 2018, 6:17am UTC](https://discourse.slicer.org/t/dicom-image-series-loading-issue/2501/3 "2018-04-04T06:17:02Z")

</div>

yes data has been loaded but not completely, only few series images…