# Element sizes in segmentmesher

**URL:** <https://discourse.slicer.org/t/element-sizes-in-segmentmesher/14083>\
**Category:** Support\
**Tags:** segmentmesher\
**Created:** [October 16, 2020, 5:14pm UTC](https://discourse.slicer.org/t/element-sizes-in-segmentmesher/14083 "2020-10-16T17:14:01Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Aep93](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.slicer.org/aep93/32/5990_2.png) [@Aep93](https://discourse.slicer.org/u/Aep93)\
**Post date:** [October 16, 2020, 5:14pm UTC](https://discourse.slicer.org/t/element-sizes-in-segmentmesher/14083/1 "2020-10-16T17:14:01Z")

</div>

Hello all,  
I am using the segmentmesher to create a volumetric mesh. However, the generated meshes do not look fine to me; at some parts the mesh is coarse and at some parts, it is very fine. I tried to play with segmentmesher parameters to solve that however, I was not successful. I attached a picture from my current mesh.

 ![image](https://us1.discourse-cdn.com/flex002/uploads/slicer/original/3X/1/6/1638a3213ca1e6dbd3a961337ca81af6d1fc7442.png)

How should I solve this problem?  
Any helps on this is greatly appreciated.