# Exporting Centerline Data to Fusion 360

**URL:** <https://discourse.slicer.org/t/exporting-centerline-data-to-fusion-360/24546>\
**Category:** Support\
**Created:** [July 28, 2022, 2:26pm UTC](https://discourse.slicer.org/t/exporting-centerline-data-to-fusion-360/24546 "2022-07-28T14:26:45Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Busayo101](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.slicer.org/busayo101/32/16128_2.png) [@Busayo101](https://discourse.slicer.org/u/Busayo101)\
**Post date:** [July 28, 2022, 2:26pm UTC](https://discourse.slicer.org/t/exporting-centerline-data-to-fusion-360/24546/1 "2022-07-28T14:26:46Z")

</div>

Hello!

I am trying to take a Centerline and bring it into Fusion 360 in the same orientation. Is it possible to convert it into a spline or some sort to be able to refrence it in Fusion 360? No matter what format I download the centerline in I am unable to open it in Fusion 360 or any other application really.

![Centerline in 3D slicer](https://us1.discourse-cdn.com/flex002/uploads/slicer/original/3X/4/7/47d42ba266b1c5e2b7a8f8cf7b59c70b17441fb0.png)

---

<div class="post-metadata">

**Author:** ![Yvonne](https://avatars.discourse-cdn.com/v4/letter/y/3be4f8/32.png) [@Yvonne](https://discourse.slicer.org/u/Yvonne)\
**Post date:** [May 8, 2023, 2:22pm UTC](https://discourse.slicer.org/t/exporting-centerline-data-to-fusion-360/24546/2 "2023-05-08T14:22:32Z")

</div>

Hi

Did you find a solution? I tried to export in stl file, and I still couldn’t open the file in Ultimaker Cura?

Cheers