# How can give more than one segments different color in the same volume?
**URL:** https://discourse.slicer.org/t/how-can-give-more-than-one-segments-different-color-in-the-same-volume/23788
**Category:** Support
**Created:** [June 9, 2022, 8:30am UTC](https://discourse.slicer.org/t/how-can-give-more-than-one-segments-different-color-in-the-same-volume/23788 "2022-06-09T08:30:04Z")
**Posts on this page:** 8
**Page:** 1
### Author:  [@MAXFAXSURGEON](https://discourse.slicer.org/u/MAXFAXSURGEON)
#### Post date: [June 9, 2022, 8:30am UTC](https://discourse.slicer.org/t/how-can-give-more-than-one-segments-different-color-in-the-same-volume/23788/1 "2022-06-09T08:30:04Z")
Dears in 3D Slicer support team,
I want to know how could I color different regions with different colors in the same model!
As you can seen in this screenshot below:
Want to color the fractured segments (small ones) with a different color than the whole mandible!
Thank you so much for appreciated help.
---
### Author:  [@mau\_igna\_06](https://discourse.slicer.org/u/mau_igna_06)
#### Post date: [June 9, 2022, 8:57am UTC](https://discourse.slicer.org/t/how-can-give-more-than-one-segments-different-color-in-the-same-volume/23788/2 "2022-06-09T08:57:46Z")
If they are separated from the mandible you can use islands effect to add them to a new segment
---
### Author:  [@MAXFAXSURGEON](https://discourse.slicer.org/u/MAXFAXSURGEON)
#### Post date: [June 9, 2022, 10:44am UTC](https://discourse.slicer.org/t/how-can-give-more-than-one-segments-different-color-in-the-same-volume/23788/3 "2022-06-09T10:44:13Z")
Thank you, Can you please explain more and if there is a demo link would be great if shared! Thank you again
---
### Author:  [@mau\_igna\_06](https://discourse.slicer.org/u/mau_igna_06)
#### Post date: [June 9, 2022, 10:45am UTC](https://discourse.slicer.org/t/how-can-give-more-than-one-segments-different-color-in-the-same-volume/23788/4 "2022-06-09T10:45:58Z")
Here you have
[ ](https://www.youtube.com/watch?v=bCZZ2oxgWxQ)
---
### Author:  [@MAXFAXSURGEON](https://discourse.slicer.org/u/MAXFAXSURGEON)
#### Post date: [June 9, 2022, 11:14am UTC](https://discourse.slicer.org/t/how-can-give-more-than-one-segments-different-color-in-the-same-volume/23788/5 "2022-06-09T11:14:17Z")
But this one dose not show to the end result! Do this mean by doing these steps I would have two different colored segments in the same model?
---
### Author:  [@mau\_igna\_06](https://discourse.slicer.org/u/mau_igna_06)
#### Post date: [June 9, 2022, 11:23am UTC](https://discourse.slicer.org/t/how-can-give-more-than-one-segments-different-color-in-the-same-volume/23788/6 "2022-06-09T11:23:32Z")
If you want to have dofferent colors on the same model you should use color scalars
For example: red=1,blue=2, and so on
You can explore the models module to know more about this
---
### Author:  [@muratmaga](https://discourse.slicer.org/u/muratmaga)
#### Post date: [June 9, 2022, 6:51pm UTC](https://discourse.slicer.org/t/how-can-give-more-than-one-segments-different-color-in-the-same-volume/23788/7 "2022-06-09T18:51:35Z")
Please do not post screen captures with private information on them!
---
### Author:  [@MAXFAXSURGEON](https://discourse.slicer.org/u/MAXFAXSURGEON)
#### Post date: [June 10, 2022, 4:18am UTC](https://discourse.slicer.org/t/how-can-give-more-than-one-segments-different-color-in-the-same-volume/23788/8 "2022-06-10T04:18:23Z")
You are right, next time I will take care. Thank you for such great notice.