# Loading stopped at AutoStru

**URL:** <https://discourse.slicer.org/t/loading-stopped-at-autostru/13493>\
**Category:** Support\
**Tags:** dicom\
**Created:** [September 15, 2020, 5:18pm UTC](https://discourse.slicer.org/t/loading-stopped-at-autostru/13493 "2020-09-15T17:18:15Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![Eyck\_Blank](https://avatars.discourse-cdn.com/v4/letter/e/b2d939/32.png) [@Eyck\_Blank](https://discourse.slicer.org/u/Eyck_Blank)\
**Post date:** [September 15, 2020, 5:18pm UTC](https://discourse.slicer.org/t/loading-stopped-at-autostru/13493/1 "2020-09-15T17:18:15Z")

</div>

Hi,  
I cannot load pation DICOM files into 3D Slicer, independent od AdvanceMode is checked. .  
I use version 4.10.2  
The loading process will stopped at AutoStru.  
Could someone help me?

---

<div class="post-metadata">

**Author:** ![lassoan](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.slicer.org/lassoan/32/13_2.png) [@lassoan](https://discourse.slicer.org/u/lassoan)\
**Post date:** [September 15, 2020, 5:26pm UTC](https://discourse.slicer.org/t/loading-stopped-at-autostru/13493/2 "2020-09-15T17:26:56Z")

</div>

Please use latest Slicer Preview Release and install SlicerRT extension. Let us know if you still have trouble loading the data.

---

<div class="post-metadata">

**Author:** ![cpinter](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.slicer.org/cpinter/32/7995_2.png) [@cpinter](https://discourse.slicer.org/u/cpinter)\
**Post date:** [September 15, 2020, 5:55pm UTC](https://discourse.slicer.org/t/loading-stopped-at-autostru/13493/3 "2020-09-15T17:55:15Z")

</div>

Hi Eyck,  
Please see what I wrote you in email. The answer is there. You need to uncheck Advanced because the way you set up the loadables the Scalar Volume plugin tries to load the structure set instead of RT, and it fails because of that.  
Also make sure you use a Slicer preview version.

---

<div class="post-metadata">

**Author:** ![Eyck\_Blank](https://avatars.discourse-cdn.com/v4/letter/e/b2d939/32.png) [@Eyck\_Blank](https://discourse.slicer.org/u/Eyck_Blank)\
**Post date:** [September 16, 2020, 7:01am UTC](https://discourse.slicer.org/t/loading-stopped-at-autostru/13493/4 "2020-09-16T07:01:26Z")

</div>

Thank you!  
Where can I get the latest Version?  
The latest Version, I found, is 4.10.2.

Many thanks  
Mit freundlichen Grüßen  
Dr.rer.nat. Eyck Blank

---

<div class="post-metadata">

**Author:** ![cpinter](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.slicer.org/cpinter/32/7995_2.png) [@cpinter](https://discourse.slicer.org/u/cpinter)\
**Post date:** [September 16, 2020, 7:28am UTC](https://discourse.slicer.org/t/loading-stopped-at-autostru/13493/5 "2020-09-16T07:28:10Z")

</div>

> **[Download 3D Slicer](https://download.slicer.org/)**
>
> 3D Slicer is a free, open source software for visualization, processing, segmentation, registration, and analysis of medical, biomedical, and other 3D images and meshes; and planning and navigating image-guided procedures.

 ![image](https://us1.discourse-cdn.com/flex002/uploads/slicer/original/3X/3/a/3a5d5ddc2ba69b6ca3142b8f26d9c88e09884e7d.png)

---

<div class="post-metadata">

**Author:** ![Eyck\_Blank](https://avatars.discourse-cdn.com/v4/letter/e/b2d939/32.png) [@Eyck\_Blank](https://discourse.slicer.org/u/Eyck_Blank)\
**Post date:** [September 17, 2020, 9:44am UTC](https://discourse.slicer.org/t/loading-stopped-at-autostru/13493/6 "2020-09-17T09:44:25Z")

</div>

Thank you, Mr. Lasso,  
I have installed the Version 4.11.0, I had found.  
This Version stopped the loading process at the structures too.  
Mr. Pinter told me about the Version 4.12, I have not found unfortunately.  
Can I get the possibility to install Version 4.12 anymore?

Many thanks to you!

Mit freundlichen Grüßen  
Dr.rer.nat. Eyck Blank

---

<div class="post-metadata">

**Author:** ![Eyck\_Blank](https://avatars.discourse-cdn.com/v4/letter/e/b2d939/32.png) [@Eyck\_Blank](https://discourse.slicer.org/u/Eyck_Blank)\
**Post date:** [September 17, 2020, 9:46am UTC](https://discourse.slicer.org/t/loading-stopped-at-autostru/13493/7 "2020-09-17T09:46:23Z")

</div>

Of corse, I have installed SlicerRT

Mit freundlichen Grüßen  
Dr.rer.nat. Eyck Blank