# Measuring two specific points on the both STL models @lassoan

**URL:** <https://discourse.slicer.org/t/measuring-two-specific-points-on-the-both-stl-models-lassoan/30360>\
**Category:** Support\
**Tags:** segmentation\
**Created:** [July 3, 2023, 2:59am UTC](https://discourse.slicer.org/t/measuring-two-specific-points-on-the-both-stl-models-lassoan/30360 "2023-07-03T02:59:26Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![wael\_telha](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.slicer.org/wael_telha/32/16914_2.png) [@wael\_telha](https://discourse.slicer.org/u/wael_telha)\
**Post date:** [July 3, 2023, 2:59am UTC](https://discourse.slicer.org/t/measuring-two-specific-points-on-the-both-stl-models-lassoan/30360/1 "2023-07-03T02:59:26Z")

</div>

I need a help Regarding measuring two specific points on the both STL models : the aim of the work is to measure the accuracy between virtual planning and actual surgery output. i ahve tried some steps and i need you to confirm if thecorrect or not

I started with a model registration between the pre-operative planning and post-operative model (stl)

 ![image](https://us1.discourse-cdn.com/flex002/uploads/slicer/original/3X/6/5/651d58b1eddcf18dd27758eab19bd48bb168d3e9.jpeg)

1. following the registration of the two models I used pick’n Point I choose the reference point ( edge of tooth) in the post-operative model T2 (REFERENCE MODEL) I made a point on the reference model at the area of interest to measure the distance between the same points between the two models and BEFORE running I chose the propagate the non- corresponding mesh.  
 ![image](https://us1.discourse-cdn.com/flex002/uploads/slicer/original/3X/5/9/59851ae857977a13e325bcccf204dbfdc21e0c23.jpeg)
2. then through Model to Model Distance : the source model is the post-operative Model and the target model is the pre-operative model and the calculation was done  
 ![image](https://us1.discourse-cdn.com/flex002/uploads/slicer/original/3X/8/a/8a02f11798149d6e889ac7c0f4bcb19755773305.jpeg)
3. the fourth and last step was to get the measured value through Mesh Statistics I chose the absolute value and X AXIS, Y, AND Z AXIS  
 ![image](https://us1.discourse-cdn.com/flex002/uploads/slicer/original/3X/9/6/968a99091a124b55b2dc8f7e346696235f4c59eb.jpeg)  
@lassoan