# Models of coronary arteries from OCT images

**URL:** https://discourse.slicer.org/t/models-of-coronary-arteries-from-oct-images/22372
**Category:** Support
**Tags:** segmentation, oct
**Created:** [March 8, 2022, 3:03pm UTC](https://discourse.slicer.org/t/models-of-coronary-arteries-from-oct-images/22372 "2022-03-08T15:03:53Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![mkozlowski](https://avatars.discourse-cdn.com/v4/letter/m/f6c823/32.png) [@mkozlowski](https://discourse.slicer.org/u/mkozlowski)
#### Post date: [March 8, 2022, 3:03pm UTC](https://discourse.slicer.org/t/models-of-coronary-arteries-from-oct-images/22372/1 "2022-03-08T15:03:53Z")

</div>

Operating system: masOS High Sierra  
Slicer version: 4.11.20210226 r29738 / 7a593c8

Hello!

I would like to ask for advice about preparation of 3D models of coronary arteries for printing based on OCT data. I’ve read the previous conversations that dealt with this topic but unfortunately did not find an answer. Basically I have uploaded DICOM data form OCT to Slicer. I have converted my images to grayscale. Then I did segmentation (watershed and some manual with paint) but have finally arrived at a very unsatisfactory result (see link for the file below). After reading some papers online it seems that the reason for this is that I have not taken into account the curvature of the vessel which can’t be extracted from OCT. Other people have extracted center lines of coronary arteries from coronary angiography, evenly divided the center line according to the number of pictures in the OCT and set a plane perpendicular to the center line at each point. Then each frame from OCT was supposedly placed in the corresponding plane. I have no idea what software they used. Is there any was to do the same thing in Slicer?

> **[Dropbox - File Deleted](https://www.dropbox.com/s/wdt43opyi112md1/coronary%20model%20OCT.stl?dl=0)**
>
> Dropbox is a free service that lets you bring your photos, docs, and videos anywhere and share them easily. Never email yourself a file again!

---

<div class="post-metadata">

### Author: ![lassoan](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.slicer.org/lassoan/32/13_2.png) [@lassoan](https://discourse.slicer.org/u/lassoan)
#### Post date: [April 4, 2022, 3:12pm UTC](https://discourse.slicer.org/t/models-of-coronary-arteries-from-oct-images/22372/2 "2022-04-04T15:12:14Z")

</div>

It is hard to tell from the end result what could have been done better. If you can share a typical image that you need to segment then we should be able to give advice.