# \[OpenDose3D\] Testing users needed

**URL:** <https://discourse.slicer.org/t/opendose3d-testing-users-needed/48484>\
**Category:** Development\
**Created:** [October 12, 2026, 3:57pm UTC](https://discourse.slicer.org/t/opendose3d-testing-users-needed/48484 "2026-10-12T15:57:30Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Alex\_Vergara](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.slicer.org/alex_vergara/32/15205_2.png) [@Alex\_Vergara](https://discourse.slicer.org/u/Alex_Vergara)\
**Post date:** [October 12, 2026, 3:57pm UTC](https://discourse.slicer.org/t/opendose3d-testing-users-needed/48484/1 "2026-10-12T15:57:30Z")

</div>

Hello

Testing users needed to test the gate 10 functionality inside OpenDose3D.

1. Clone the repository [OpenDose / SlicerOpenDose3D · GitLab](https://gitlab.com/opendose/opendose3d/)
2. git checkout feat/gate10-integration
3. in a fresh Slicer installation, add the module: folder OpenDose3D, not the base of the project, but the first folder inside.
4. Restart Slicer
5. Open the module opendose3D in Slicer
6. click on absorbed dose and go to the absorbed dose section
7. in the selector, choose Monte Carlo (gate 10)
8. Click on Test/install/update
9. Check that you can succesfully install and run a smoke test in your system
10. Report any missbehavings on [Work items · OpenDose / SlicerOpenDose3D · GitLab](https://gitlab.com/opendose/opendose3d/-/work_items)

Thanks in advance and good luck testing and playing with our extension 🙂