# Plus Remote Extension

**URL:** <https://discourse.slicer.org/t/plus-remote-extension/1029>\
**Category:** Support\
**Created:** [September 10, 2017, 5:57am UTC](https://discourse.slicer.org/t/plus-remote-extension/1029 "2017-09-10T05:57:25Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![iplneurosurgery](https://avatars.discourse-cdn.com/v4/letter/i/e56c9b/32.png) [@iplneurosurgery](https://discourse.slicer.org/u/iplneurosurgery)\
**Post date:** [September 10, 2017, 5:57am UTC](https://discourse.slicer.org/t/plus-remote-extension/1029/1 "2017-09-10T05:57:25Z")

</div>

Hi,

I just want to know that Plus Remote extension is available in slicer nightly build version.  
This is the link I have seen for the plus remote module in slicer 4.3.1. So I would like to know if its available in slicer nightly build version. If so then it would be helpful if can anyone guide me with the tutorials and links.

Thanks,

Suba

---

<div class="post-metadata">

**Author:** ![lassoan](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.slicer.org/lassoan/32/13_2.png) [@lassoan](https://discourse.slicer.org/u/lassoan)\
**Post date:** [September 10, 2017, 11:21am UTC](https://discourse.slicer.org/t/plus-remote-extension/1029/2 "2017-09-10T11:21:32Z")

</div>

PlusRemote is a module. It is available in SlicerIGT extension. Many tutorials are available at [www.slicerigt.org](http://www.slicerigt.org).

---

<div class="post-metadata">

**Author:** ![iplneurosurgery](https://avatars.discourse-cdn.com/v4/letter/i/e56c9b/32.png) [@iplneurosurgery](https://discourse.slicer.org/u/iplneurosurgery)\
**Post date:** [September 11, 2017, 6:17am UTC](https://discourse.slicer.org/t/plus-remote-extension/1029/3 "2017-09-11T06:17:26Z")

</div>

Hi Sir,

Thank you for your valuable reply.

Suba

---

<div class="post-metadata">

**Author:** ![iplneurosurgery](https://avatars.discourse-cdn.com/v4/letter/i/e56c9b/32.png) [@iplneurosurgery](https://discourse.slicer.org/u/iplneurosurgery)\
**Post date:** [September 11, 2017, 7:58am UTC](https://discourse.slicer.org/t/plus-remote-extension/1029/4 "2017-09-11T07:58:12Z")

</div>

Hi Sir,

Can I able to create models using Plus Remote and volume rendering in offline ultrasound datasets.

Thanks in advance,

Suba

---

<div class="post-metadata">

**Author:** ![lassoan](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.slicer.org/lassoan/32/13_2.png) [@lassoan](https://discourse.slicer.org/u/lassoan)\
**Post date:** [September 11, 2017, 1:43pm UTC](https://discourse.slicer.org/t/plus-remote-extension/1029/5 "2017-09-11T13:43:30Z")

</div>

I would recommend to use [Plus toolkit’s volume reconstructor tool](http://perk-software.cs.queensu.ca/plus/doc/nightly/user/ApplicationVolumeReconstructor.html) to reconstruct ultrasound volume from pre-recorded file.