# Problem in building SlicerCustomAppTemplate

**URL:** <https://discourse.slicer.org/t/problem-in-building-slicercustomapptemplate/9783>\
**Category:** Support\
**Created:** [January 12, 2020, 5:11pm UTC](https://discourse.slicer.org/t/problem-in-building-slicercustomapptemplate/9783 "2020-01-12T17:11:10Z")\
**Posts on this page:** 1\
**Showing post:** 5

<div class="post-metadata">

**Author:** ![Pooja\_Virkar](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.slicer.org/pooja_virkar/32/3902_2.png) [@Pooja\_Virkar](https://discourse.slicer.org/u/Pooja_Virkar)\
**Post date:** [January 18, 2020, 6:08pm UTC](https://discourse.slicer.org/t/problem-in-building-slicercustomapptemplate/9783/5 "2020-01-18T18:08:25Z")

</div>

Thank you for this information.  
I followed the steps (without modifying any CMake variables from CMakeLists.txt) and it took lot of time to build All\_Build project.  
But after it, I observed there was no Slicer-superbuild directory in my bin folder, only Slicer-build directory was there. So I built the Slicer.sln from Slicer-build and it was succeeded, run the Slicer.exe successfully.  
But In my application,I can not load Dicom data (maybe because Slicer\_BUILD\_DICOM\_SUPPORT is OFF).  
So what should I do now to turn some modules ON without doing this whole procedure of build again?

---

_[View the full topic](https://discourse.slicer.org/t/problem-in-building-slicercustomapptemplate/9783)._