# Problem with CIP 3d model and exportation

**URL:** <https://discourse.slicer.org/t/problem-with-cip-3d-model-and-exportation/11113>\
**Category:** Support\
**Tags:** extensions-manager, cip, file-export, 3d-model\
**Created:** [April 14, 2020, 1:35pm UTC](https://discourse.slicer.org/t/problem-with-cip-3d-model-and-exportation/11113 "2020-04-14T13:35:02Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![javierfuster](https://avatars.discourse-cdn.com/v4/letter/j/9fc348/32.png) [@javierfuster](https://discourse.slicer.org/u/javierfuster)\
**Post date:** [April 14, 2020, 1:35pm UTC](https://discourse.slicer.org/t/problem-with-cip-3d-model-and-exportation/11113/1 "2020-04-14T13:35:02Z")

</div>

Hi everyone,

I am making the lobe lung segmentation (Iteractive Lobe Segmentation) with the extension CIP. Everything works fine but at the moment that I want to make a 3D model it results imposible with the lobe segmentation done. I can’t make the 3D model with the 5 lobes segmented and then export this model.

I need your help, please.

Thanks in advance,

Javier

---

<div class="post-metadata">

**Author:** ![rbumm](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.slicer.org/rbumm/32/9404_2.png) [@rbumm](https://discourse.slicer.org/u/rbumm)\
**Post date:** [April 27, 2021, 8:17pm UTC](https://discourse.slicer.org/t/problem-with-cip-3d-model-and-exportation/11113/2 "2021-04-27T20:17:39Z")

</div>

Hi Javier,

You probably created a _labelmap_ from the Interactive Lobe Segmentation. You need to go to the module “Model Maker”, find the labelmap that was created by CIP, and create a new model of the five lobes.  
These can then be found in the module “Models”.  
Hope that helps  
Rudolf