# Setting for multi tif files

**URL:** <https://discourse.slicer.org/t/setting-for-multi-tif-files/32042>\
**Category:** Support\
**Created:** [October 4, 2023, 8:59pm UTC](https://discourse.slicer.org/t/setting-for-multi-tif-files/32042 "2023-10-04T20:59:35Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![jp\_jp\_jp](https://avatars.discourse-cdn.com/v4/letter/j/c77e96/32.png) [@jp\_jp\_jp](https://discourse.slicer.org/u/jp_jp_jp)\
**Post date:** [October 4, 2023, 8:59pm UTC](https://discourse.slicer.org/t/setting-for-multi-tif-files/32042/1 "2023-10-04T20:59:36Z")

</div>

Hi, I have a group of tif files that are slicers of the subject, so now what I am doing is adding the folder of the tif files, then Slicer will show me the whole object, but when the CT scanning was performed, there was a voxel spacing, I didn’t find place to input this number, thank you!

---

<div class="post-metadata">

**Author:** ![muratmaga](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.slicer.org/muratmaga/32/3622_2.png) [@muratmaga](https://discourse.slicer.org/u/muratmaga)\
**Post date:** [October 4, 2023, 9:35pm UTC](https://discourse.slicer.org/t/setting-for-multi-tif-files/32042/2 "2023-10-04T21:35:58Z")

</div>

If you use the `Imagestack` module within the SlicerMorph, your life will be a bit simpler. You can see the tutorial for the Imagestacks at the [GitHub - SlicerMorph/Tutorials: SlicerMorph module tutorials](https://github.com/SlicerMorph/Tutorials) (and others)

Meanwhile if you need to fix the spacing, go to `Volumes` module and manually edit the spacing as provided to you by the imaging lab, and then remember to re-save your file.  
 ![Screen Shot 2023-10-04 at 2.37.24 PM](https://us1.discourse-cdn.com/flex002/uploads/slicer/original/3X/9/c/9cb9e3b474e242f7d7f5cc6ae1c93140ae8df65d.png)