# Slicer fresh build crash start, but executes with sudo permissions **URL:** https://discourse.slicer.org/t/slicer-fresh-build-crash-start-but-executes-with-sudo-permissions/32978 **Category:** Support **Tags:** build, installation **Created:** [November 23, 2023, 12:26pm UTC](https://discourse.slicer.org/t/slicer-fresh-build-crash-start-but-executes-with-sudo-permissions/32978 "2023-11-23T12:26:47Z") **Posts on this page:** 15 **Page:** 1
### Author: ![acsenrafilho](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.slicer.org/acsenrafilho/32/6217_2.png) [@acsenrafilho](https://discourse.slicer.org/u/acsenrafilho) #### Post date: [November 23, 2023, 12:26pm UTC](https://discourse.slicer.org/t/slicer-fresh-build-crash-start-but-executes-with-sudo-permissions/32978/1 "2023-11-23T12:26:47Z")
Hi Slicers! I am quite embarrassed to ask this, but I have tried to find this topic on the forum and rebuilding Slicer several times with slightly different options. However, it still continues to happen. The problem is that the Slicer build from the source (Linux system) crashes when starts, but when I call the execution using sudo permission ("sudo ./Slicer) it works normally. I followed the build instructions on the [Slicer documentation](https://slicer.readthedocs.io/en/latest/developer_guide/build_instructions/linux.html#) I copied the terminal output to present my system and Slicer configuration details. The command called was: ./Slicer --launcher-verbose --application-information ## Terminal output ```auto antonio@LOAMRI-Legion:~/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build$ ./Slicer --launcher-verbose --application-information info: AdditionalSettingsFilePath [] info: LauncherSplashImagePath [/home/antonio/Documents/Slicer/Applications/SlicerApp/Resources/Images/Slicer-SplashScreen.png] info: LauncherSplashScreenHideDelayMs [3000] info: ApplicationToLaunch [/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/bin/./SlicerApp-real] info: ApplicationToLaunchArguments [] info: AdditionalSettingsFilePath [] info: LauncherDir [/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build] info: LauncherName [Slicer] info: OrganizationDomain [slicer.org] info: OrganizationName [slicer.org] info: ApplicationName [Slicer] info: ApplicationRevision [31938] info: SettingsFileName [/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/./SlicerLauncherSettings.ini] info: SettingsDir [/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build] info: UserAdditionalSettingsDir [/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/slicer.org] info: UserAdditionalSettingsFileName [/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/slicer.org/Slicer-31938.ini] info: UserAdditionalSettingsFileBaseName [] info: AdditionalSettingsDir [] info: AdditionalSettingsExcludeGroups [] info: LauncherNoSplashScreen [0] info: AdditionalLauncherHelpShortArgument [-h] info: AdditionalLauncherHelpLongArgument [--help] info: AdditionalLauncherNoSplashArguments [--no-splash,--help,--version,--home,--program-path,--no-main-window,--settings-path,--temporary-path] info: DetachApplicationToLaunch [0] info: LoadEnvironment [-1] info: LauncherSplashImagePath [/home/antonio/Documents/Slicer/Applications/SlicerApp/Resources/Images/Slicer-SplashScreen.png] info: LauncherSplashScreenHideDelayMs [3000] info: ApplicationToLaunch [/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/bin/./SlicerApp-real] info: ApplicationToLaunchArguments [] info: -> [/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build] info: -> [Slicer] info: (RegularSettings) -> [/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build] info: (UserAdditionalSettings) -> [/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/slicer.org] info: (AdditionalSettings) -> [] info: -> [:] info: Setting env. variable [QTWEBENGINE_DISABLE_SANDBOX]:1 info: Setting env. variable [SLICER_HOME]:/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build info: Setting env. variable [PIP_REQUIRE_VIRTUALENV]:0 info: Setting env. variable [ITK_AUTOLOAD_PATH]:/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/lib/Slicer-5.4/ITKFactories/. info: Setting env. variable [PYTHONNOUSERSITE]:1 info: Setting env. variable [PYTHONHOME]:/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install info: Setting env. variable [SSL_CERT_FILE]:/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/share/Slicer-5.4/Slicer.crt info: Setting env. variable [LibraryPaths]:/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/bin/.:/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/../lib/Slicer-5.4/qt-loadable-modules:/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/lib/Slicer-5.4/cli-modules/.:/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/lib/Slicer-5.4/qt-loadable-modules/.:/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/OpenSSL:/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib:/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/VTK-build/lib/.:/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/teem-build/bin/.:/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/DCMTK-build/lib/.:/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/ITK-build/lib/.:/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/CTK-build/CTK-build/bin/.:/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/CTK-build/QtTesting-build/.:/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/CTK-build/PythonQt-build/.:/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/LibArchive-install/lib:/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/SimpleITK-build/SimpleITK-build/lib/.:/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/SlicerExecutionModel-build/ModuleDescriptionParser/bin/.:/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib/python3.9/site-packages/numpy/core:/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib/python3.9/site-packages/numpy/lib:/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/JsonCpp-build/src/lib_json/. info: Setting env. variable [LD_LIBRARY_PATH]:/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/bin/.:/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/../lib/Slicer-5.4/qt-loadable-modules:/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/lib/Slicer-5.4/cli-modules/.:/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/lib/Slicer-5.4/qt-loadable-modules/.:/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/OpenSSL:/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib:/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/VTK-build/lib/.:/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/teem-build/bin/.:/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/DCMTK-build/lib/.:/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/ITK-build/lib/.:/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/CTK-build/CTK-build/bin/.:/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/CTK-build/QtTesting-build/.:/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/CTK-build/PythonQt-build/.:/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/LibArchive-install/lib:/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/SimpleITK-build/SimpleITK-build/lib/.:/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/SlicerExecutionModel-build/ModuleDescriptionParser/bin/.:/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib/python3.9/site-packages/numpy/core:/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib/python3.9/site-packages/numpy/lib:/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/JsonCpp-build/src/lib_json/. info: Setting env. variable [PATH]:/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/bin/.:/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/lib/Slicer-5.4/cli-modules/.:/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/bin:/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/teem-build/bin/. info: Setting env. variable [QT_PLUGIN_PATH]:/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/bin:/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/CTK-build/CTK-build/bin:/usr/lib/plugins info: Setting env. variable [PYTHONPATH]:/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/bin/.:/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/bin/Python:/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/lib/Slicer-5.4/qt-loadable-modules/.:/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/lib/Slicer-5.4/qt-loadable-modules/Python:/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/lib/Slicer-5.4/qt-scripted-modules:/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib/python3.9:/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib/python3.9/lib-dynload:/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib/python3.9/site-packages:/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/VTK-build/lib/python3.9/site-packages:/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/CTK-build/CTK-build/bin/Python:/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/CTK-build/CTK-build/bin/. info: Starting [/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/bin/./SlicerApp-real] info: argument [--application-information] info: launcher-timeout (ms) [-1000] info: DisableSplash [0] Session start time .......: 2023-11-23 09:00:21 Slicer version ...........: 5.4.0-2023-08-19 (revision 31938 / 311cb26) linux-amd64 - not installed release Operating system .........: Linux / 5.15.0-88-generic / #98-Ubuntu SMP Mon Oct 2 15:18:56 UTC 2023 / UTF-8 - 64-bit Memory ...................: 15778 MB physical, 2047 MB virtual CPU ......................: GenuineIntel 12th Gen Intel(R) Core(TM) i7-12700H, 14 cores, 20 logical processors VTK configuration ........: OpenGL2 rendering, Sequential threading Qt configuration .........: version 5.15.3, with SSL, requested OpenGL 3.2 (core profile) Internationalization .....: disabled, language= Developer mode ...........: disabled Application path .........: /home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/bin Additional module paths ..: (none) antonio@LOAMRI-Legion:~/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build$ cmake --version cmake version 3.27.8 CMake suite maintained and supported by Kitware (kitware.com/cmake). ``` I am sorry for the newbie problem, probably I missed something simple in the middle of the configuration. Any help would be very nice. ---
### Author: ![lassoan](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.slicer.org/lassoan/32/13_2.png) [@lassoan](https://discourse.slicer.org/u/lassoan) #### Post date: [November 23, 2023, 12:43pm UTC](https://discourse.slicer.org/t/slicer-fresh-build-crash-start-but-executes-with-sudo-permissions/32978/2 "2023-11-23T12:43:45Z")
The crash is probably in `SlicerApp-real` due to trying to access some resources (temporary folder?). Can you get a stack trace of the crash? That would tell what is the resource that the application cannot access and we could make the error detection and reporting more robust and helpful. ---
### Author: ![acsenrafilho](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.slicer.org/acsenrafilho/32/6217_2.png) [@acsenrafilho](https://discourse.slicer.org/u/acsenrafilho) #### Post date: [November 23, 2023, 8:08pm UTC](https://discourse.slicer.org/t/slicer-fresh-build-crash-start-but-executes-with-sudo-permissions/32978/3 "2023-11-23T20:08:55Z")
Hi lassoan, Can you help me to set up this stack trace execution? I did know how to do it. I am trying to get more information about it, but any instruction will be very helpful. ---
### Author: ![acsenrafilho](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.slicer.org/acsenrafilho/32/6217_2.png) [@acsenrafilho](https://discourse.slicer.org/u/acsenrafilho) #### Post date: [November 23, 2023, 8:17pm UTC](https://discourse.slicer.org/t/slicer-fresh-build-crash-start-but-executes-with-sudo-permissions/32978/4 "2023-11-23T20:17:00Z")
lassoan, I get a tip on another post in the Slicer forum ([link](https://discourse.slicer.org/t/cant-start-slicer-on-linux-on-one-machine/8175/2)) and I copied the final part of the execution: ```auto access("/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/slicer.org/Slicer-31938.ini", F_OK) = 0 openat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/slicer.org/Slicer-31938.ini", O_RDWR|O_CREAT|O_CLOEXEC, 0666) = -1 EACCES (Permission denied) access("/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/slicer.org/Slicer-31938.ini", F_OK) = 0 openat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/slicer.org/Slicer-31938.ini", O_RDWR|O_CREAT|O_CLOEXEC, 0666) = -1 EACCES (Permission denied) statx(AT_FDCWD, "/home/antonio/.config/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, {stx_mask=STATX_ALL|STATX_MNT_ID, stx_attributes=0, stx_mode=S_IFREG|0664, stx_size=20537, ...}) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 access("/home/antonio/.config/slicer.org.ini", F_OK) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/home/antonio/.config/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffc0c5d3ce0) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/home/antonio/.config/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffc0c5d3c80) = -1 ENOENT (No such file or directory) access("/etc/xdg/xdg-cinnamon/slicer.org/Slicer.ini", F_OK) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/xdg-cinnamon/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffc0c5d3ce0) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/xdg-cinnamon/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffc0c5d3c80) = -1 ENOENT (No such file or directory) access("/etc/xdg/slicer.org/Slicer.ini", F_OK) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffc0c5d3ce0) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffc0c5d3c80) = -1 ENOENT (No such file or directory) access("/etc/xdg/xdg-cinnamon/slicer.org.ini", F_OK) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/xdg-cinnamon/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffc0c5d3ce0) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/xdg-cinnamon/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffc0c5d3c80) = -1 ENOENT (No such file or directory) access("/etc/xdg/slicer.org.ini", F_OK) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffc0c5d3ce0) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffc0c5d3c80) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/home/antonio/.config/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, {stx_mask=STATX_ALL|STATX_MNT_ID, stx_attributes=0, stx_mode=S_IFREG|0664, stx_size=20537, ...}) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 access("/home/antonio/.config/slicer.org.ini", F_OK) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/home/antonio/.config/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffc0c5d3cc0) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/home/antonio/.config/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffc0c5d3c60) = -1 ENOENT (No such file or directory) access("/etc/xdg/xdg-cinnamon/slicer.org/Slicer.ini", F_OK) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/xdg-cinnamon/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffc0c5d3cc0) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/xdg-cinnamon/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffc0c5d3c60) = -1 ENOENT (No such file or directory) access("/etc/xdg/slicer.org/Slicer.ini", F_OK) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffc0c5d3cc0) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffc0c5d3c60) = -1 ENOENT (No such file or directory) access("/etc/xdg/xdg-cinnamon/slicer.org.ini", F_OK) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/xdg-cinnamon/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffc0c5d3cc0) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/xdg-cinnamon/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffc0c5d3c60) = -1 ENOENT (No such file or directory) access("/etc/xdg/slicer.org.ini", F_OK) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffc0c5d3cc0) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffc0c5d3c60) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/home/antonio/.config/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, {stx_mask=STATX_ALL|STATX_MNT_ID, stx_attributes=0, stx_mode=S_IFREG|0664, stx_size=20537, ...}) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 access("/home/antonio/.config/slicer.org.ini", F_OK) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/home/antonio/.config/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffc0c5d3c40) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/home/antonio/.config/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffc0c5d3be0) = -1 ENOENT (No such file or directory) access("/etc/xdg/xdg-cinnamon/slicer.org/Slicer.ini", F_OK) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/xdg-cinnamon/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffc0c5d3c40) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/xdg-cinnamon/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffc0c5d3be0) = -1 ENOENT (No such file or directory) access("/etc/xdg/slicer.org/Slicer.ini", F_OK) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffc0c5d3c40) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffc0c5d3be0) = -1 ENOENT (No such file or directory) access("/etc/xdg/xdg-cinnamon/slicer.org.ini", F_OK) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/xdg-cinnamon/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffc0c5d3c40) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/xdg-cinnamon/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffc0c5d3be0) = -1 ENOENT (No such file or directory) access("/etc/xdg/slicer.org.ini", F_OK) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffc0c5d3c40) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffc0c5d3be0) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/home/antonio/.config/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, {stx_mask=STATX_ALL|STATX_MNT_ID, stx_attributes=0, stx_mode=S_IFREG|0664, stx_size=20537, ...}) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 access("/home/antonio/.config/slicer.org.ini", F_OK) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/home/antonio/.config/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffc0c5d3c10) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/home/antonio/.config/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffc0c5d3bb0) = -1 ENOENT (No such file or directory) access("/etc/xdg/xdg-cinnamon/slicer.org/Slicer.ini", F_OK) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/xdg-cinnamon/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffc0c5d3c10) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/xdg-cinnamon/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffc0c5d3bb0) = -1 ENOENT (No such file or directory) access("/etc/xdg/slicer.org/Slicer.ini", F_OK) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffc0c5d3c10) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffc0c5d3bb0) = -1 ENOENT (No such file or directory) access("/etc/xdg/xdg-cinnamon/slicer.org.ini", F_OK) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/xdg-cinnamon/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffc0c5d3c10) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/xdg-cinnamon/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffc0c5d3bb0) = -1 ENOENT (No such file or directory) access("/etc/xdg/slicer.org.ini", F_OK) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffc0c5d3c10) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffc0c5d3bb0) = -1 ENOENT (No such file or directory) access("/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/slicer.org/Slicer-31938.ini", F_OK) = 0 openat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/slicer.org/Slicer-31938.ini", O_RDWR|O_CREAT|O_CLOEXEC, 0666) = -1 EACCES (Permission denied) newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/bin/Python/slicer", {st_mode=S_IFDIR|0775, st_size=4096, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/bin", {st_mode=S_IFDIR|0775, st_size=12288, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/bin/Python", {st_mode=S_IFDIR|0775, st_size=4096, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/lib/Slicer-5.4/qt-loadable-modules", {st_mode=S_IFDIR|0775, st_size=16384, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/lib/Slicer-5.4/qt-loadable-modules/Python", {st_mode=S_IFDIR|0775, st_size=4096, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/lib/Slicer-5.4/qt-scripted-modules", {st_mode=S_IFDIR|0775, st_size=4096, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib/python3.9", {st_mode=S_IFDIR|0775, st_size=12288, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib/python3.9/code.py", {st_mode=S_IFREG|0644, st_size=10622, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib/python3.9/code.py", {st_mode=S_IFREG|0644, st_size=10622, ...}, 0) = 0 openat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib/python3.9/ __pycache__ /code.cpython-39.pyc", O_RDONLY|O_CLOEXEC) = 26 newfstatat(26, "", {st_mode=S_IFREG|0644, st_size=9978, ...}, AT_EMPTY_PATH) = 0 ioctl(26, TCGETS, 0x7ffc0c5d2e90) = -1 ENOTTY (Inappropriate ioctl for device) lseek(26, 0, SEEK_CUR) = 0 lseek(26, 0, SEEK_CUR) = 0 newfstatat(26, "", {st_mode=S_IFREG|0644, st_size=9978, ...}, AT_EMPTY_PATH) = 0 read(26, "a\r\r\n\0\0\0\0\323\227\340a~)\0\0\343\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 9979) = 9978 read(26, "", 1) = 0 close(26) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/bin/Python/slicer", {st_mode=S_IFDIR|0775, st_size=4096, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/bin", {st_mode=S_IFDIR|0775, st_size=12288, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/bin/Python", {st_mode=S_IFDIR|0775, st_size=4096, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/lib/Slicer-5.4/qt-loadable-modules", {st_mode=S_IFDIR|0775, st_size=16384, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/lib/Slicer-5.4/qt-loadable-modules/Python", {st_mode=S_IFDIR|0775, st_size=4096, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/lib/Slicer-5.4/qt-scripted-modules", {st_mode=S_IFDIR|0775, st_size=4096, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib/python3.9", {st_mode=S_IFDIR|0775, st_size=12288, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib/python3.9/codeop.py", {st_mode=S_IFREG|0644, st_size=6326, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib/python3.9/codeop.py", {st_mode=S_IFREG|0644, st_size=6326, ...}, 0) = 0 openat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib/python3.9/ __pycache__ /codeop.cpython-39.pyc", O_RDONLY|O_CLOEXEC) = 26 newfstatat(26, "", {st_mode=S_IFREG|0644, st_size=6520, ...}, AT_EMPTY_PATH) = 0 ioctl(26, TCGETS, 0x7ffc0c5d2020) = -1 ENOTTY (Inappropriate ioctl for device) lseek(26, 0, SEEK_CUR) = 0 lseek(26, 0, SEEK_CUR) = 0 newfstatat(26, "", {st_mode=S_IFREG|0644, st_size=6520, ...}, AT_EMPTY_PATH) = 0 read(26, "a\r\r\n\0\0\0\0\323\227\340a\266\30\0\0\343\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 6521) = 6520 read(26, "", 1) = 0 close(26) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/bin/Python/slicer", {st_mode=S_IFDIR|0775, st_size=4096, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/bin", {st_mode=S_IFDIR|0775, st_size=12288, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/bin/Python", {st_mode=S_IFDIR|0775, st_size=4096, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/lib/Slicer-5.4/qt-loadable-modules", {st_mode=S_IFDIR|0775, st_size=16384, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/lib/Slicer-5.4/qt-loadable-modules/Python", {st_mode=S_IFDIR|0775, st_size=4096, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/lib/Slicer-5.4/qt-scripted-modules", {st_mode=S_IFDIR|0775, st_size=4096, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib/python3.9", {st_mode=S_IFDIR|0775, st_size=12288, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib/python3.9/pydoc.py", {st_mode=S_IFREG|0644, st_size=109545, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib/python3.9/pydoc.py", {st_mode=S_IFREG|0644, st_size=109545, ...}, 0) = 0 openat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib/python3.9/ __pycache__ /pydoc.cpython-39.pyc", O_RDONLY|O_CLOEXEC) = 26 newfstatat(26, "", {st_mode=S_IFREG|0644, st_size=85378, ...}, AT_EMPTY_PATH) = 0 ioctl(26, TCGETS, 0x7ffc0c5d2df0) = -1 ENOTTY (Inappropriate ioctl for device) lseek(26, 0, SEEK_CUR) = 0 lseek(26, 0, SEEK_CUR) = 0 newfstatat(26, "", {st_mode=S_IFREG|0644, st_size=85378, ...}, AT_EMPTY_PATH) = 0 read(26, "a\r\r\n\0\0\0\0\323\227\340a\351\253\1\0\343\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 85379) = 85378 read(26, "", 1) = 0 close(26) = 0 mmap(NULL, 262144, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f4ed9388000 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/bin/Python/slicer", {st_mode=S_IFDIR|0775, st_size=4096, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/bin", {st_mode=S_IFDIR|0775, st_size=12288, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/bin/Python", {st_mode=S_IFDIR|0775, st_size=4096, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/lib/Slicer-5.4/qt-loadable-modules", {st_mode=S_IFDIR|0775, st_size=16384, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/lib/Slicer-5.4/qt-loadable-modules/Python", {st_mode=S_IFDIR|0775, st_size=4096, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/lib/Slicer-5.4/qt-scripted-modules", {st_mode=S_IFDIR|0775, st_size=4096, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib/python3.9", {st_mode=S_IFDIR|0775, st_size=12288, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib/python3.9/pkgutil.py", {st_mode=S_IFREG|0644, st_size=24276, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib/python3.9/pkgutil.py", {st_mode=S_IFREG|0644, st_size=24276, ...}, 0) = 0 openat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib/python3.9/ __pycache__ /pkgutil.cpython-39.pyc", O_RDONLY|O_CLOEXEC) = 26 newfstatat(26, "", {st_mode=S_IFREG|0644, st_size=18628, ...}, AT_EMPTY_PATH) = 0 ioctl(26, TCGETS, 0x7ffc0c5d1f80) = -1 ENOTTY (Inappropriate ioctl for device) lseek(26, 0, SEEK_CUR) = 0 lseek(26, 0, SEEK_CUR) = 0 newfstatat(26, "", {st_mode=S_IFREG|0644, st_size=18628, ...}, AT_EMPTY_PATH) = 0 read(26, "a\r\r\n\0\0\0\0\323\227\340a\324^\0\0\343\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 18629) = 18628 read(26, "", 1) = 0 close(26) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/bin/Python/slicer", {st_mode=S_IFDIR|0775, st_size=4096, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/bin", {st_mode=S_IFDIR|0775, st_size=12288, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/bin/Python", {st_mode=S_IFDIR|0775, st_size=4096, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/lib/Slicer-5.4/qt-loadable-modules", {st_mode=S_IFDIR|0775, st_size=16384, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/lib/Slicer-5.4/qt-loadable-modules/Python", {st_mode=S_IFDIR|0775, st_size=4096, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/lib/Slicer-5.4/qt-scripted-modules", {st_mode=S_IFDIR|0775, st_size=4096, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib/python3.9", {st_mode=S_IFDIR|0775, st_size=12288, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib/python3.9/sysconfig.py", {st_mode=S_IFREG|0644, st_size=24914, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib/python3.9/sysconfig.py", {st_mode=S_IFREG|0644, st_size=24914, ...}, 0) = 0 openat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib/python3.9/ __pycache__ /sysconfig.cpython-39.pyc", O_RDONLY|O_CLOEXEC) = 26 newfstatat(26, "", {st_mode=S_IFREG|0644, st_size=16129, ...}, AT_EMPTY_PATH) = 0 ioctl(26, TCGETS, 0x7ffc0c5d1f80) = -1 ENOTTY (Inappropriate ioctl for device) lseek(26, 0, SEEK_CUR) = 0 lseek(26, 0, SEEK_CUR) = 0 newfstatat(26, "", {st_mode=S_IFREG|0644, st_size=16129, ...}, AT_EMPTY_PATH) = 0 read(26, "a\r\r\n\0\0\0\0\323\227\340aRa\0\0\343\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 16130) = 16129 read(26, "", 1) = 0 close(26) = 0 getcwd("/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build", 1024) = 67 newfstatat(AT_FDCWD, "/home", {st_mode=S_IFDIR|0755, st_size=4096, ...}, AT_SYMLINK_NOFOLLOW) = 0 newfstatat(AT_FDCWD, "/home/antonio", {st_mode=S_IFDIR|0750, st_size=4096, ...}, AT_SYMLINK_NOFOLLOW) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents", {st_mode=S_IFDIR|0755, st_size=4096, ...}, AT_SYMLINK_NOFOLLOW) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0", {st_mode=S_IFDIR|0775, st_size=12288, ...}, AT_SYMLINK_NOFOLLOW) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build", {st_mode=S_IFDIR|0775, st_size=4096, ...}, AT_SYMLINK_NOFOLLOW) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/Modules/Setup", 0x7ffc0c5d19c0, 0) = -1 ENOENT (No such file or directory) newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/Modules/Setup.local", 0x7ffc0c5d19c0, 0) = -1 ENOENT (No such file or directory) newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/bin/Python/slicer", {st_mode=S_IFDIR|0775, st_size=4096, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/bin", {st_mode=S_IFDIR|0775, st_size=12288, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/bin/Python", {st_mode=S_IFDIR|0775, st_size=4096, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/lib/Slicer-5.4/qt-loadable-modules", {st_mode=S_IFDIR|0775, st_size=16384, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/lib/Slicer-5.4/qt-loadable-modules/Python", {st_mode=S_IFDIR|0775, st_size=4096, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/lib/Slicer-5.4/qt-scripted-modules", {st_mode=S_IFDIR|0775, st_size=4096, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib/python3.9", {st_mode=S_IFDIR|0775, st_size=12288, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib/python3.9/_sysconfigdata__linux2_.py", {st_mode=S_IFREG|0644, st_size=18320, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib/python3.9/_sysconfigdata__linux2_.py", {st_mode=S_IFREG|0644, st_size=18320, ...}, 0) = 0 openat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib/python3.9/ __pycache__ /_sysconfigdata__linux2_.cpython-39.pyc", O_RDONLY|O_CLOEXEC) = 26 newfstatat(26, "", {st_mode=S_IFREG|0644, st_size=16219, ...}, AT_EMPTY_PATH) = 0 ioctl(26, TCGETS, 0x7ffc0c5d1050) = -1 ENOTTY (Inappropriate ioctl for device) lseek(26, 0, SEEK_CUR) = 0 lseek(26, 0, SEEK_CUR) = 0 newfstatat(26, "", {st_mode=S_IFREG|0644, st_size=16219, ...}, AT_EMPTY_PATH) = 0 read(26, "a\r\r\n\0\0\0\0\307\20]e\220G\0\0\343\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 16220) = 16219 read(26, "", 1) = 0 close(26) = 0 newfstatat(AT_FDCWD, "/home", {st_mode=S_IFDIR|0755, st_size=4096, ...}, AT_SYMLINK_NOFOLLOW) = 0 newfstatat(AT_FDCWD, "/home/antonio", {st_mode=S_IFDIR|0750, st_size=4096, ...}, AT_SYMLINK_NOFOLLOW) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents", {st_mode=S_IFDIR|0755, st_size=4096, ...}, AT_SYMLINK_NOFOLLOW) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0", {st_mode=S_IFDIR|0775, st_size=12288, ...}, AT_SYMLINK_NOFOLLOW) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install", {st_mode=S_IFDIR|0775, st_size=4096, ...}, AT_SYMLINK_NOFOLLOW) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib", {st_mode=S_IFDIR|0775, st_size=4096, ...}, AT_SYMLINK_NOFOLLOW) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib/python3.9", {st_mode=S_IFDIR|0775, st_size=12288, ...}, AT_SYMLINK_NOFOLLOW) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib/python3.9/config-3.9", {st_mode=S_IFDIR|0775, st_size=4096, ...}, AT_SYMLINK_NOFOLLOW) = 0 pipe2([26, 27], 0) = 0 lseek(1, 0, SEEK_CUR) = 0 dup(1) = 28 dup2(27, 1) = 1 close(27) = 0 mmap(NULL, 8392704, PROT_NONE, MAP_PRIVATE|MAP_ANONYMOUS|MAP_STACK, -1, 0) = 0x7f4ed8b87000 mprotect(0x7f4ed8b88000, 8388608, PROT_READ|PROT_WRITE) = 0 rt_sigprocmask(SIG_BLOCK, ~[], [], 8) = 0 clone3({flags=CLONE_VM|CLONE_FS|CLONE_FILES|CLONE_SIGHAND|CLONE_THREAD|CLONE_SYSVSEM|CLONE_SETTLS|CLONE_PARENT_SETTID|CLONE_CHILD_CLEARTID, child_tid=0x7f4ed9387910, parent_tid=0x7f4ed9387910, exit_signal=0, stack=0x7f4ed8b87000, stack_size=0x7fd1c0, tls=0x7f4ed9387640} => {parent_tid=[1063867]}, 88) = 1063867 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 pipe2([27, 29], 0) = 0 lseek(2, 0, SEEK_CUR) = -1 ESPIPE (Illegal seek) dup(2) = 30 dup2(29, 2) = 2 close(29) = 0 mmap(NULL, 8392704, PROT_NONE, MAP_PRIVATE|MAP_ANONYMOUS|MAP_STACK, -1, 0) = 0x7f4ed8386000 mprotect(0x7f4ed8387000, 8388608, PROT_READ|PROT_WRITE) = 0 rt_sigprocmask(SIG_BLOCK, ~[], [], 8) = 0 clone3({flags=CLONE_VM|CLONE_FS|CLONE_FILES|CLONE_SIGHAND|CLONE_THREAD|CLONE_SYSVSEM|CLONE_SETTLS|CLONE_PARENT_SETTID|CLONE_CHILD_CLEARTID, child_tid=0x7f4ed8b86910, parent_tid=0x7f4ed8b86910, exit_signal=0, stack=0x7f4ed8386000, stack_size=0x7fd1c0, tls=0x7f4ed8b86640} => {parent_tid=[1063868]}, 88) = 1063868 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 futex(0x560153f6a738, FUTEX_WAKE_PRIVATE, 1) = 1 readlink("/tmp", 0x7ffc0c5d37e0, 1023) = -1 EINVAL (Invalid argument) statx(AT_FDCWD, "/tmp/Slicer-antonio", AT_STATX_SYNC_AS_STAT, STATX_ALL, {stx_mask=STATX_ALL|STATX_MNT_ID, stx_attributes=0, stx_mode=S_IFDIR|0775, stx_size=4096, ...}) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 unlink("/tmp/Slicer-antonio/Slicer_31938_20231123_090021_359.log") = -1 ENOENT (No such file or directory) newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 access("/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/CMakeCache.txt", F_OK) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 openat(AT_FDCWD, "/proc/cpuinfo", O_RDONLY) = 32 newfstatat(32, "", {st_mode=S_IFREG|0444, st_size=0, ...}, AT_EMPTY_PATH) = 0 read(32, "processor\t: 0\nvendor_id\t: Genuin"..., 1024) = 1024 read(32, "ock_detect avx_vnni dtherm ida a"..., 1024) = 1024 read(32, "cx8 apic sep mtrr pge mca cmov p"..., 1024) = 1024 read(32, "apic_reg vid ple shadow_vmcs ept"..., 1024) = 1024 read(32, "c rdrand lahf_lm abm 3dnowprefet"..., 1024) = 1024 read(32, "i7-12700H\nstepping\t: 3\nmicrocode"..., 1024) = 1024 read(32, "e waitpkg gfni vaes vpclmulqdq r"..., 1024) = 1024 read(32, "gb rdtscp lm constant_tsc art ar"..., 1024) = 1024 read(32, " spec_store_bypass swapgs eibrs_"..., 1024) = 1024 read(32, "lexpriority ept vpid ept_ad fsgs"..., 1024) = 1024 read(32, "ings\t: 20\ncore id\t\t: 12\ncpu core"..., 1024) = 1024 read(32, "ch_capabilities\nvmx flags\t: vnmi"..., 1024) = 1024 read(32, "mperf tsc_known_freq pni pclmulq"..., 1024) = 1024 read(32, "ress sizes\t: 39 bits physical, 4"..., 1024) = 1024 read(32, "lflushopt clwb intel_pt sha_ni x"..., 1024) = 1024 read(32, " yes\ncpuid level\t: 32\nwp\t\t: yes\n"..., 1024) = 1024 read(32, "expriority apicv tsc_offset vtpr"..., 1024) = 1024 read(32, " pdcm sse4_1 sse4_2 x2apic movbe"..., 1024) = 1024 read(32, "ineIntel\ncpu family\t: 6\nmodel\t\t:"..., 1024) = 1024 read(32, "ida arat pln pts hwp hwp_notify "..., 1024) = 1024 read(32, "ca cmov pat pse36 clflush dts ac"..., 1024) = 1024 read(32, "_vmcs ept_mode_based_exec tsc_sc"..., 1024) = 1024 read(32, "m 3dnowprefetch cpuid_fault epb "..., 1024) = 1024 read(32, "\t: 3\nmicrocode\t: 0x430\ncpu MHz\t\t"..., 1024) = 1024 read(32, "vaes vpclmulqdq rdpid movdiri mo"..., 1024) = 1024 read(32, "constant_tsc art arch_perfmon pe"..., 1024) = 1024 read(32, "ypass swapgs eibrs_pbrsb\nbogomip"..., 1024) = 1024 read(32, " ept vpid ept_ad fsgsbase tsc_ad"..., 1024) = 1024 read(32, "core id\t\t: 29\ncpu cores\t: 14\napi"..., 1024) = 1024 read(32, "ities\nvmx flags\t: vnmi preemptio"..., 1024) = 1024 read(32, "_known_freq pni pclmulqdq dtes64"..., 1024) = 1024 read(32, "s\t: 39 bits physical, 48 bits vi"..., 1024) = 1024 read(32, "t clwb intel_pt sha_ni xsaveopt "..., 1024) = 708 read(32, "", 1024) = 0 close(32) = 0 brk(0x560154484000) = 0x560154484000 brk(0x5601544ad000) = 0x5601544ad000 brk(0x5601544d5000) = 0x5601544d5000 brk(0x5601544f6000) = 0x5601544f6000 brk(0x560154517000) = 0x560154517000 brk(0x560154538000) = 0x560154538000 brk(0x560154560000) = 0x560154560000 brk(0x560154581000) = 0x560154581000 brk(0x5601545a2000) = 0x5601545a2000 brk(0x5601545c3000) = 0x5601545c3000 brk(0x5601545eb000) = 0x5601545eb000 brk(0x56015460c000) = 0x56015460c000 brk(0x56015462d000) = 0x56015462d000 brk(0x56015464e000) = 0x56015464e000 brk(0x560154676000) = 0x560154676000 brk(0x560154697000) = 0x560154697000 brk(0x5601546b8000) = 0x5601546b8000 brk(0x5601546d9000) = 0x5601546d9000 brk(0x560154701000) = 0x560154701000 brk(0x560154722000) = 0x560154722000 uname({sysname="Linux", nodename="LOAMRI-Legion", ...}) = 0 uname({sysname="Linux", nodename="LOAMRI-Legion", ...}) = 0 openat(AT_FDCWD, "/proc/meminfo", O_RDONLY) = 32 newfstatat(32, "", {st_mode=S_IFREG|0444, st_size=0, ...}, AT_EMPTY_PATH) = 0 read(32, "MemTotal: 16156924 kB\nMemF"..., 1024) = 1024 read(32, "pted: 0 kB\nAnonHugePages: "..., 1024) = 395 read(32, "", 1024) = 0 close(32) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 access("/home/antonio/.config/slicer.org/Slicer.ini", F_OK) = 0 openat(AT_FDCWD, "/home/antonio/.config/slicer.org/Slicer.ini", O_RDWR|O_CREAT|O_CLOEXEC, 0666) = 32 close(32) = 0 openat(AT_FDCWD, "/home/antonio/.config/slicer.org/Slicer.ini.lock", O_RDWR|O_CREAT|O_EXCL|O_CLOEXEC, 0666) = 32 flock(32, LOCK_EX|LOCK_NB) = 0 openat(AT_FDCWD, "/proc/sys/kernel/random/boot_id", O_RDONLY|O_CLOEXEC) = 33 read(33, "738c301f-54a0-4d05-bc07-07f88f34"..., 36) = 36 close(33) = 0 openat(AT_FDCWD, "/var/lib/dbus/machine-id", O_RDONLY|O_CLOEXEC) = 33 read(33, "10b971ac1a304176906b1f6a23827476", 32) = 32 close(33) = 0 uname({sysname="Linux", nodename="LOAMRI-Legion", ...}) = 0 getpid() = 1063841 readlink("/proc/1063841/exe", "/home/antonio/Documents/Slicer-S"..., 256) = 85 getpid() = 1063841 write(32, "1063841\nSlicerApp-real\nLOAMRI-Le"..., 107) = 107 fdatasync(32) = 0 access("/home/antonio/.config/slicer.org/Slicer.ini", F_OK) = 0 statx(AT_FDCWD, "/home/antonio/.config/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, {stx_mask=STATX_ALL|STATX_MNT_ID, stx_attributes=0, stx_mode=S_IFREG|0664, stx_size=20537, ...}) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 access("/home/antonio/.config/slicer.org/Slicer.ini", F_OK) = 0 access("/home/antonio/.config/slicer.org/Slicer.ini", W_OK) = 0 statx(AT_FDCWD, "/home/antonio/.config/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, {stx_mask=STATX_ALL|STATX_MNT_ID, stx_attributes=0, stx_mode=S_IFREG|0664, stx_size=20537, ...}) = 0 statx(AT_FDCWD, "/home/antonio/.config/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT|AT_SYMLINK_NOFOLLOW, STATX_ALL, {stx_mask=STATX_ALL|STATX_MNT_ID, stx_attributes=0, stx_mode=S_IFREG|0664, stx_size=20537, ...}) = 0 openat(AT_FDCWD, "/home/antonio/.config/slicer.org", O_RDWR|O_CLOEXEC|O_TMPFILE, 0600) = 33 statx(AT_FDCWD, "/home/antonio/.config/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, {stx_mask=STATX_ALL|STATX_MNT_ID, stx_attributes=0, stx_mode=S_IFREG|0664, stx_size=20537, ...}) = 0 access("/home/antonio/.config/slicer.org/Slicer.ini", R_OK) = 0 access("/home/antonio/.config/slicer.org/Slicer.ini", W_OK) = 0 access("/home/antonio/.config/slicer.org/Slicer.ini", X_OK) = -1 EACCES (Permission denied) fchmod(33, 0664) = 0 statx(33, "", AT_STATX_SYNC_AS_STAT|AT_EMPTY_PATH, STATX_ALL, {stx_mask=STATX_ALL|STATX_MNT_ID, stx_attributes=0, stx_mode=S_IFREG|0664, stx_size=0, ...}) = 0 write(33, "[General]\nDatabaseDirectory_0.7."..., 16157) = 16157 write(33, "RecentFiles\\8\\file=@Variant(\\0\\0"..., 4380) = 4380 lseek(33, 0, SEEK_SET) = 0 fdatasync(33) = 0 linkat(AT_FDCWD, "/proc/self/fd/33", AT_FDCWD, "/home/antonio/.config/slicer.org/Slicer.ini", AT_SYMLINK_FOLLOW) = -1 EEXIST (File exists) linkat(AT_FDCWD, "/proc/self/fd/33", AT_FDCWD, "/home/antonio/.config/slicer.org/Slicer.ini.hShYsc", AT_SYMLINK_FOLLOW) = 0 close(33) = 0 rename("/home/antonio/.config/slicer.org/Slicer.ini.hShYsc", "/home/antonio/.config/slicer.org/Slicer.ini") = 0 statx(AT_FDCWD, "/home/antonio/.config/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, {stx_mask=STATX_ALL|STATX_MNT_ID, stx_attributes=0, stx_mode=S_IFREG|0664, stx_size=20537, ...}) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 close(32) = 0 unlink("/home/antonio/.config/slicer.org/Slicer.ini.lock") = 0 access("/home/antonio/.config/slicer.org.ini", F_OK) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/home/antonio/.config/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffc0c5d3e60) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/home/antonio/.config/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffc0c5d3e00) = -1 ENOENT (No such file or directory) access("/etc/xdg/xdg-cinnamon/slicer.org/Slicer.ini", F_OK) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/xdg-cinnamon/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffc0c5d3e60) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/xdg-cinnamon/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffc0c5d3e00) = -1 ENOENT (No such file or directory) access("/etc/xdg/slicer.org/Slicer.ini", F_OK) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffc0c5d3e60) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffc0c5d3e00) = -1 ENOENT (No such file or directory) access("/etc/xdg/xdg-cinnamon/slicer.org.ini", F_OK) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/xdg-cinnamon/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffc0c5d3e60) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/xdg-cinnamon/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffc0c5d3e00) = -1 ENOENT (No such file or directory) access("/etc/xdg/slicer.org.ini", F_OK) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffc0c5d3e60) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffc0c5d3e00) = -1 ENOENT (No such file or directory) newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 access("/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/slicer.org/Slicer-31938.ini", F_OK) = 0 openat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/slicer.org/Slicer-31938.ini", O_RDWR|O_CREAT|O_CLOEXEC, 0666) = -1 EACCES (Permission denied) newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 --- SIGSEGV {si_signo=SIGSEGV, si_code=SEGV_MAPERR, si_addr=0x7f4f6ecad6b8} --- +++ killed by SIGSEGV (core dumped) +++ Segmentation fault (core dumped) ``` I hope this could help. Please let me know if there is another way to find the problem. Thank you! ---
### Author: ![lassoan](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.slicer.org/lassoan/32/13_2.png) [@lassoan](https://discourse.slicer.org/u/lassoan) #### Post date: [November 23, 2023, 8:35pm UTC](https://discourse.slicer.org/t/slicer-fresh-build-crash-start-but-executes-with-sudo-permissions/32978/5 "2023-11-23T20:35:30Z")
It is odd that Slicer cannot access this file: `/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/slicer.org/Slicer-31938.ini` Does the file exist? Can the current user access it? Does it help if you change permissions so that the current user can access it (or erase the file so that the current user creates it when launching Slicer)? ---
### Author: ![acsenrafilho](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.slicer.org/acsenrafilho/32/6217_2.png) [@acsenrafilho](https://discourse.slicer.org/u/acsenrafilho) #### Post date: [November 23, 2023, 8:47pm UTC](https://discourse.slicer.org/t/slicer-fresh-build-crash-start-but-executes-with-sudo-permissions/32978/6 "2023-11-23T20:47:18Z")
Interesting… the file indeed exist, with the following info: ```auto [Extensions] FrontendServerUrl=https://extensions.slicer.org InstallPath=slicer.org/Extensions-31938 LastServerAPI=Girder_v1 ManagerEnabled=true ServerUrl=https://slicer-packages.kitware.com [Modules] AdditionalPaths=@Invalid() IgnoreModules=@Invalid() ``` However, I do not know how this specific file is placed to `root` access 😯 ```auto antonio@LOAMRI-Legion:~/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/slicer.org$ ls -la total 16 drwxrwxr-x 3 antonio antonio 4096 Nov 23 08:59 . drwxrwxr-x 19 antonio antonio 4096 Nov 23 17:13 .. drwxrwxr-x 2 antonio antonio 4096 Nov 21 18:02 Extensions-31938 -rw-rw-r-- 1 root root 254 Nov 23 08:59 Slicer-31938.ini ``` I have changed the file access to my user (`antonio`, using the command `sudo chown antonio:antonio Slicer-31938.ini`). However the execution still fails… The new trace is: ```auto rename("/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/slicer.org/Slicer-31938.ini.euTTKB", "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/slicer.org/Slicer-31938.ini") = 0 statx(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/slicer.org/Slicer-31938.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, {stx_mask=STATX_ALL|STATX_MNT_ID, stx_attributes=0, stx_mode=S_IFREG|0664, stx_size=254, ...}) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 close(26) = 0 unlink("/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/slicer.org/Slicer-31938.ini.lock") = 0 statx(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/slicer.org/Extensions-31938", AT_STATX_SYNC_AS_STAT, STATX_ALL, {stx_mask=STATX_ALL|STATX_MNT_ID, stx_attributes=0, stx_mode=S_IFDIR|0775, stx_size=4096, ...}) = 0 statx(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/slicer.org/Slicer-31938.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, {stx_mask=STATX_ALL|STATX_MNT_ID, stx_attributes=0, stx_mode=S_IFREG|0664, stx_size=254, ...}) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 statx(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/slicer.org/Slicer-31938.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, {stx_mask=STATX_ALL|STATX_MNT_ID, stx_attributes=0, stx_mode=S_IFREG|0664, stx_size=254, ...}) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 statx(AT_FDCWD, "/home/antonio/.config/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, {stx_mask=STATX_ALL|STATX_MNT_ID, stx_attributes=0, stx_mode=S_IFREG|0664, stx_size=21247, ...}) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 access("/home/antonio/.config/slicer.org.ini", F_OK) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/home/antonio/.config/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffe779c5650) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/home/antonio/.config/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffe779c55f0) = -1 ENOENT (No such file or directory) access("/etc/xdg/xdg-cinnamon/slicer.org/Slicer.ini", F_OK) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/xdg-cinnamon/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffe779c5650) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/xdg-cinnamon/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffe779c55f0) = -1 ENOENT (No such file or directory) access("/etc/xdg/slicer.org/Slicer.ini", F_OK) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffe779c5650) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffe779c55f0) = -1 ENOENT (No such file or directory) access("/etc/xdg/xdg-cinnamon/slicer.org.ini", F_OK) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/xdg-cinnamon/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffe779c5650) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/xdg-cinnamon/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffe779c55f0) = -1 ENOENT (No such file or directory) access("/etc/xdg/slicer.org.ini", F_OK) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffe779c5650) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffe779c55f0) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/slicer.org/Extensions-31938", O_RDONLY|O_NONBLOCK|O_CLOEXEC|O_DIRECTORY) = 26 newfstatat(26, "", {st_mode=S_IFDIR|0775, st_size=4096, ...}, AT_EMPTY_PATH) = 0 getdents64(26, 0x55ff1ce847a0 /* 2 entries */, 32768) = 48 getdents64(26, 0x55ff1ce847a0 /* 0 entries */, 32768) = 0 close(26) = 0 statx(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/slicer.org/Slicer-31938.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, {stx_mask=STATX_ALL|STATX_MNT_ID, stx_attributes=0, stx_mode=S_IFREG|0664, stx_size=254, ...}) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 statx(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/slicer.org/Slicer-31938.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, {stx_mask=STATX_ALL|STATX_MNT_ID, stx_attributes=0, stx_mode=S_IFREG|0664, stx_size=254, ...}) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 statx(AT_FDCWD, "/home/antonio/.config/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, {stx_mask=STATX_ALL|STATX_MNT_ID, stx_attributes=0, stx_mode=S_IFREG|0664, stx_size=21247, ...}) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 access("/home/antonio/.config/slicer.org.ini", F_OK) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/home/antonio/.config/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffe779c5660) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/home/antonio/.config/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffe779c5600) = -1 ENOENT (No such file or directory) access("/etc/xdg/xdg-cinnamon/slicer.org/Slicer.ini", F_OK) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/xdg-cinnamon/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffe779c5660) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/xdg-cinnamon/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffe779c5600) = -1 ENOENT (No such file or directory) access("/etc/xdg/slicer.org/Slicer.ini", F_OK) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffe779c5660) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffe779c5600) = -1 ENOENT (No such file or directory) access("/etc/xdg/xdg-cinnamon/slicer.org.ini", F_OK) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/xdg-cinnamon/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffe779c5660) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/xdg-cinnamon/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffe779c5600) = -1 ENOENT (No such file or directory) access("/etc/xdg/slicer.org.ini", F_OK) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffe779c5660) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffe779c5600) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/home/antonio/.config/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, {stx_mask=STATX_ALL|STATX_MNT_ID, stx_attributes=0, stx_mode=S_IFREG|0664, stx_size=21247, ...}) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 access("/home/antonio/.config/slicer.org.ini", F_OK) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/home/antonio/.config/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffe779c5640) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/home/antonio/.config/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffe779c55e0) = -1 ENOENT (No such file or directory) access("/etc/xdg/xdg-cinnamon/slicer.org/Slicer.ini", F_OK) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/xdg-cinnamon/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffe779c5640) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/xdg-cinnamon/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffe779c55e0) = -1 ENOENT (No such file or directory) access("/etc/xdg/slicer.org/Slicer.ini", F_OK) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffe779c5640) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffe779c55e0) = -1 ENOENT (No such file or directory) access("/etc/xdg/xdg-cinnamon/slicer.org.ini", F_OK) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/xdg-cinnamon/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffe779c5640) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/xdg-cinnamon/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffe779c55e0) = -1 ENOENT (No such file or directory) access("/etc/xdg/slicer.org.ini", F_OK) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffe779c5640) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffe779c55e0) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/home/antonio/.config/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, {stx_mask=STATX_ALL|STATX_MNT_ID, stx_attributes=0, stx_mode=S_IFREG|0664, stx_size=21247, ...}) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 access("/home/antonio/.config/slicer.org.ini", F_OK) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/home/antonio/.config/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffe779c55c0) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/home/antonio/.config/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffe779c5560) = -1 ENOENT (No such file or directory) access("/etc/xdg/xdg-cinnamon/slicer.org/Slicer.ini", F_OK) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/xdg-cinnamon/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffe779c55c0) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/xdg-cinnamon/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffe779c5560) = -1 ENOENT (No such file or directory) access("/etc/xdg/slicer.org/Slicer.ini", F_OK) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffe779c55c0) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffe779c5560) = -1 ENOENT (No such file or directory) access("/etc/xdg/xdg-cinnamon/slicer.org.ini", F_OK) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/xdg-cinnamon/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffe779c55c0) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/xdg-cinnamon/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffe779c5560) = -1 ENOENT (No such file or directory) access("/etc/xdg/slicer.org.ini", F_OK) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffe779c55c0) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffe779c5560) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/home/antonio/.config/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, {stx_mask=STATX_ALL|STATX_MNT_ID, stx_attributes=0, stx_mode=S_IFREG|0664, stx_size=21247, ...}) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 access("/home/antonio/.config/slicer.org.ini", F_OK) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/home/antonio/.config/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffe779c5590) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/home/antonio/.config/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffe779c5530) = -1 ENOENT (No such file or directory) access("/etc/xdg/xdg-cinnamon/slicer.org/Slicer.ini", F_OK) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/xdg-cinnamon/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffe779c5590) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/xdg-cinnamon/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffe779c5530) = -1 ENOENT (No such file or directory) access("/etc/xdg/slicer.org/Slicer.ini", F_OK) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffe779c5590) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffe779c5530) = -1 ENOENT (No such file or directory) access("/etc/xdg/xdg-cinnamon/slicer.org.ini", F_OK) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/xdg-cinnamon/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffe779c5590) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/xdg-cinnamon/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffe779c5530) = -1 ENOENT (No such file or directory) access("/etc/xdg/slicer.org.ini", F_OK) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffe779c5590) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffe779c5530) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/slicer.org/Slicer-31938.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, {stx_mask=STATX_ALL|STATX_MNT_ID, stx_attributes=0, stx_mode=S_IFREG|0664, stx_size=254, ...}) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/bin/Python/slicer", {st_mode=S_IFDIR|0775, st_size=4096, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/bin", {st_mode=S_IFDIR|0775, st_size=12288, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/bin/Python", {st_mode=S_IFDIR|0775, st_size=4096, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/lib/Slicer-5.4/qt-loadable-modules", {st_mode=S_IFDIR|0775, st_size=16384, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/lib/Slicer-5.4/qt-loadable-modules/Python", {st_mode=S_IFDIR|0775, st_size=4096, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/lib/Slicer-5.4/qt-scripted-modules", {st_mode=S_IFDIR|0775, st_size=4096, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib/python3.9", {st_mode=S_IFDIR|0775, st_size=12288, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib/python3.9/code.py", {st_mode=S_IFREG|0644, st_size=10622, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib/python3.9/code.py", {st_mode=S_IFREG|0644, st_size=10622, ...}, 0) = 0 openat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib/python3.9/ __pycache__ /code.cpython-39.pyc", O_RDONLY|O_CLOEXEC) = 26 newfstatat(26, "", {st_mode=S_IFREG|0644, st_size=9978, ...}, AT_EMPTY_PATH) = 0 ioctl(26, TCGETS, 0x7ffe779c4810) = -1 ENOTTY (Inappropriate ioctl for device) lseek(26, 0, SEEK_CUR) = 0 lseek(26, 0, SEEK_CUR) = 0 newfstatat(26, "", {st_mode=S_IFREG|0644, st_size=9978, ...}, AT_EMPTY_PATH) = 0 read(26, "a\r\r\n\0\0\0\0\323\227\340a~)\0\0\343\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 9979) = 9978 read(26, "", 1) = 0 close(26) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/bin/Python/slicer", {st_mode=S_IFDIR|0775, st_size=4096, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/bin", {st_mode=S_IFDIR|0775, st_size=12288, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/bin/Python", {st_mode=S_IFDIR|0775, st_size=4096, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/lib/Slicer-5.4/qt-loadable-modules", {st_mode=S_IFDIR|0775, st_size=16384, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/lib/Slicer-5.4/qt-loadable-modules/Python", {st_mode=S_IFDIR|0775, st_size=4096, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/lib/Slicer-5.4/qt-scripted-modules", {st_mode=S_IFDIR|0775, st_size=4096, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib/python3.9", {st_mode=S_IFDIR|0775, st_size=12288, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib/python3.9/codeop.py", {st_mode=S_IFREG|0644, st_size=6326, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib/python3.9/codeop.py", {st_mode=S_IFREG|0644, st_size=6326, ...}, 0) = 0 openat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib/python3.9/ __pycache__ /codeop.cpython-39.pyc", O_RDONLY|O_CLOEXEC) = 26 newfstatat(26, "", {st_mode=S_IFREG|0644, st_size=6520, ...}, AT_EMPTY_PATH) = 0 ioctl(26, TCGETS, 0x7ffe779c39a0) = -1 ENOTTY (Inappropriate ioctl for device) lseek(26, 0, SEEK_CUR) = 0 lseek(26, 0, SEEK_CUR) = 0 newfstatat(26, "", {st_mode=S_IFREG|0644, st_size=6520, ...}, AT_EMPTY_PATH) = 0 read(26, "a\r\r\n\0\0\0\0\323\227\340a\266\30\0\0\343\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 6521) = 6520 read(26, "", 1) = 0 close(26) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/bin/Python/slicer", {st_mode=S_IFDIR|0775, st_size=4096, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/bin", {st_mode=S_IFDIR|0775, st_size=12288, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/bin/Python", {st_mode=S_IFDIR|0775, st_size=4096, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/lib/Slicer-5.4/qt-loadable-modules", {st_mode=S_IFDIR|0775, st_size=16384, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/lib/Slicer-5.4/qt-loadable-modules/Python", {st_mode=S_IFDIR|0775, st_size=4096, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/lib/Slicer-5.4/qt-scripted-modules", {st_mode=S_IFDIR|0775, st_size=4096, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib/python3.9", {st_mode=S_IFDIR|0775, st_size=12288, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib/python3.9/pydoc.py", {st_mode=S_IFREG|0644, st_size=109545, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib/python3.9/pydoc.py", {st_mode=S_IFREG|0644, st_size=109545, ...}, 0) = 0 openat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib/python3.9/ __pycache__ /pydoc.cpython-39.pyc", O_RDONLY|O_CLOEXEC) = 26 newfstatat(26, "", {st_mode=S_IFREG|0644, st_size=85378, ...}, AT_EMPTY_PATH) = 0 ioctl(26, TCGETS, 0x7ffe779c4770) = -1 ENOTTY (Inappropriate ioctl for device) lseek(26, 0, SEEK_CUR) = 0 lseek(26, 0, SEEK_CUR) = 0 newfstatat(26, "", {st_mode=S_IFREG|0644, st_size=85378, ...}, AT_EMPTY_PATH) = 0 read(26, "a\r\r\n\0\0\0\0\323\227\340a\351\253\1\0\343\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 85379) = 85378 read(26, "", 1) = 0 close(26) = 0 mmap(NULL, 262144, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fa3e7dd3000 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/bin/Python/slicer", {st_mode=S_IFDIR|0775, st_size=4096, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/bin", {st_mode=S_IFDIR|0775, st_size=12288, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/bin/Python", {st_mode=S_IFDIR|0775, st_size=4096, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/lib/Slicer-5.4/qt-loadable-modules", {st_mode=S_IFDIR|0775, st_size=16384, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/lib/Slicer-5.4/qt-loadable-modules/Python", {st_mode=S_IFDIR|0775, st_size=4096, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/lib/Slicer-5.4/qt-scripted-modules", {st_mode=S_IFDIR|0775, st_size=4096, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib/python3.9", {st_mode=S_IFDIR|0775, st_size=12288, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib/python3.9/pkgutil.py", {st_mode=S_IFREG|0644, st_size=24276, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib/python3.9/pkgutil.py", {st_mode=S_IFREG|0644, st_size=24276, ...}, 0) = 0 openat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib/python3.9/ __pycache__ /pkgutil.cpython-39.pyc", O_RDONLY|O_CLOEXEC) = 26 newfstatat(26, "", {st_mode=S_IFREG|0644, st_size=18628, ...}, AT_EMPTY_PATH) = 0 ioctl(26, TCGETS, 0x7ffe779c3900) = -1 ENOTTY (Inappropriate ioctl for device) lseek(26, 0, SEEK_CUR) = 0 lseek(26, 0, SEEK_CUR) = 0 newfstatat(26, "", {st_mode=S_IFREG|0644, st_size=18628, ...}, AT_EMPTY_PATH) = 0 read(26, "a\r\r\n\0\0\0\0\323\227\340a\324^\0\0\343\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 18629) = 18628 read(26, "", 1) = 0 close(26) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/bin/Python/slicer", {st_mode=S_IFDIR|0775, st_size=4096, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/bin", {st_mode=S_IFDIR|0775, st_size=12288, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/bin/Python", {st_mode=S_IFDIR|0775, st_size=4096, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/lib/Slicer-5.4/qt-loadable-modules", {st_mode=S_IFDIR|0775, st_size=16384, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/lib/Slicer-5.4/qt-loadable-modules/Python", {st_mode=S_IFDIR|0775, st_size=4096, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/lib/Slicer-5.4/qt-scripted-modules", {st_mode=S_IFDIR|0775, st_size=4096, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib/python3.9", {st_mode=S_IFDIR|0775, st_size=12288, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib/python3.9/sysconfig.py", {st_mode=S_IFREG|0644, st_size=24914, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib/python3.9/sysconfig.py", {st_mode=S_IFREG|0644, st_size=24914, ...}, 0) = 0 openat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib/python3.9/ __pycache__ /sysconfig.cpython-39.pyc", O_RDONLY|O_CLOEXEC) = 26 newfstatat(26, "", {st_mode=S_IFREG|0644, st_size=16129, ...}, AT_EMPTY_PATH) = 0 ioctl(26, TCGETS, 0x7ffe779c3900) = -1 ENOTTY (Inappropriate ioctl for device) lseek(26, 0, SEEK_CUR) = 0 lseek(26, 0, SEEK_CUR) = 0 newfstatat(26, "", {st_mode=S_IFREG|0644, st_size=16129, ...}, AT_EMPTY_PATH) = 0 read(26, "a\r\r\n\0\0\0\0\323\227\340aRa\0\0\343\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 16130) = 16129 read(26, "", 1) = 0 close(26) = 0 getcwd("/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build", 1024) = 67 newfstatat(AT_FDCWD, "/home", {st_mode=S_IFDIR|0755, st_size=4096, ...}, AT_SYMLINK_NOFOLLOW) = 0 newfstatat(AT_FDCWD, "/home/antonio", {st_mode=S_IFDIR|0750, st_size=4096, ...}, AT_SYMLINK_NOFOLLOW) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents", {st_mode=S_IFDIR|0755, st_size=4096, ...}, AT_SYMLINK_NOFOLLOW) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0", {st_mode=S_IFDIR|0775, st_size=12288, ...}, AT_SYMLINK_NOFOLLOW) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build", {st_mode=S_IFDIR|0775, st_size=4096, ...}, AT_SYMLINK_NOFOLLOW) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/Modules/Setup", 0x7ffe779c3340, 0) = -1 ENOENT (No such file or directory) newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/Modules/Setup.local", 0x7ffe779c3340, 0) = -1 ENOENT (No such file or directory) newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/bin/Python/slicer", {st_mode=S_IFDIR|0775, st_size=4096, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/bin", {st_mode=S_IFDIR|0775, st_size=12288, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/bin/Python", {st_mode=S_IFDIR|0775, st_size=4096, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/lib/Slicer-5.4/qt-loadable-modules", {st_mode=S_IFDIR|0775, st_size=16384, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/lib/Slicer-5.4/qt-loadable-modules/Python", {st_mode=S_IFDIR|0775, st_size=4096, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/lib/Slicer-5.4/qt-scripted-modules", {st_mode=S_IFDIR|0775, st_size=4096, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib/python3.9", {st_mode=S_IFDIR|0775, st_size=12288, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib/python3.9/_sysconfigdata__linux2_.py", {st_mode=S_IFREG|0644, st_size=18320, ...}, 0) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib/python3.9/_sysconfigdata__linux2_.py", {st_mode=S_IFREG|0644, st_size=18320, ...}, 0) = 0 openat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib/python3.9/ __pycache__ /_sysconfigdata__linux2_.cpython-39.pyc", O_RDONLY|O_CLOEXEC) = 26 newfstatat(26, "", {st_mode=S_IFREG|0644, st_size=16219, ...}, AT_EMPTY_PATH) = 0 ioctl(26, TCGETS, 0x7ffe779c29d0) = -1 ENOTTY (Inappropriate ioctl for device) lseek(26, 0, SEEK_CUR) = 0 lseek(26, 0, SEEK_CUR) = 0 newfstatat(26, "", {st_mode=S_IFREG|0644, st_size=16219, ...}, AT_EMPTY_PATH) = 0 read(26, "a\r\r\n\0\0\0\0\307\20]e\220G\0\0\343\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 16220) = 16219 read(26, "", 1) = 0 close(26) = 0 newfstatat(AT_FDCWD, "/home", {st_mode=S_IFDIR|0755, st_size=4096, ...}, AT_SYMLINK_NOFOLLOW) = 0 newfstatat(AT_FDCWD, "/home/antonio", {st_mode=S_IFDIR|0750, st_size=4096, ...}, AT_SYMLINK_NOFOLLOW) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents", {st_mode=S_IFDIR|0755, st_size=4096, ...}, AT_SYMLINK_NOFOLLOW) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0", {st_mode=S_IFDIR|0775, st_size=12288, ...}, AT_SYMLINK_NOFOLLOW) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install", {st_mode=S_IFDIR|0775, st_size=4096, ...}, AT_SYMLINK_NOFOLLOW) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib", {st_mode=S_IFDIR|0775, st_size=4096, ...}, AT_SYMLINK_NOFOLLOW) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib/python3.9", {st_mode=S_IFDIR|0775, st_size=12288, ...}, AT_SYMLINK_NOFOLLOW) = 0 newfstatat(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/python-install/lib/python3.9/config-3.9", {st_mode=S_IFDIR|0775, st_size=4096, ...}, AT_SYMLINK_NOFOLLOW) = 0 pipe2([26, 27], 0) = 0 lseek(1, 0, SEEK_CUR) = -1 ESPIPE (Illegal seek) dup(1) = 28 dup2(27, 1) = 1 close(27) = 0 mmap(NULL, 8392704, PROT_NONE, MAP_PRIVATE|MAP_ANONYMOUS|MAP_STACK, -1, 0) = 0x7fa3e75d2000 mprotect(0x7fa3e75d3000, 8388608, PROT_READ|PROT_WRITE) = 0 rt_sigprocmask(SIG_BLOCK, ~[], [], 8) = 0 clone3({flags=CLONE_VM|CLONE_FS|CLONE_FILES|CLONE_SIGHAND|CLONE_THREAD|CLONE_SYSVSEM|CLONE_SETTLS|CLONE_PARENT_SETTID|CLONE_CHILD_CLEARTID, child_tid=0x7fa3e7dd2910, parent_tid=0x7fa3e7dd2910, exit_signal=0, stack=0x7fa3e75d2000, stack_size=0x7fd1c0, tls=0x7fa3e7dd2640} => {parent_tid=[1377243]}, 88) = 1377243 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 pipe2([27, 29], 0) = 0 lseek(2, 0, SEEK_CUR) = -1 ESPIPE (Illegal seek) dup(2) = 30 dup2(29, 2) = 2 close(29) = 0 mmap(NULL, 8392704, PROT_NONE, MAP_PRIVATE|MAP_ANONYMOUS|MAP_STACK, -1, 0) = 0x7fa3e6dd1000 mprotect(0x7fa3e6dd2000, 8388608, PROT_READ|PROT_WRITE) = 0 rt_sigprocmask(SIG_BLOCK, ~[], [], 8) = 0 clone3({flags=CLONE_VM|CLONE_FS|CLONE_FILES|CLONE_SIGHAND|CLONE_THREAD|CLONE_SYSVSEM|CLONE_SETTLS|CLONE_PARENT_SETTID|CLONE_CHILD_CLEARTID, child_tid=0x7fa3e75d1910, parent_tid=0x7fa3e75d1910, exit_signal=0, stack=0x7fa3e6dd1000, stack_size=0x7fd1c0, tls=0x7fa3e75d1640} => {parent_tid=[1377244]}, 88) = 1377244 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 readlink("/tmp", 0x7ffe779c5160, 1023) = -1 EINVAL (Invalid argument) statx(AT_FDCWD, "/tmp/Slicer-antonio", AT_STATX_SYNC_AS_STAT, STATX_ALL, {stx_mask=STATX_ALL|STATX_MNT_ID, stx_attributes=0, stx_mode=S_IFDIR|0775, stx_size=4096, ...}) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 unlink("/tmp/Slicer-antonio/Slicer_31938_20231123_102003_826.log") = -1 ENOENT (No such file or directory) newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 access("/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/CMakeCache.txt", F_OK) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 openat(AT_FDCWD, "/proc/cpuinfo", O_RDONLY) = 32 newfstatat(32, "", {st_mode=S_IFREG|0444, st_size=0, ...}, AT_EMPTY_PATH) = 0 read(32, "processor\t: 0\nvendor_id\t: Genuin"..., 1024) = 1024 read(32, "ock_detect avx_vnni dtherm ida a"..., 1024) = 1024 read(32, "cx8 apic sep mtrr pge mca cmov p"..., 1024) = 1024 read(32, "apic_reg vid ple shadow_vmcs ept"..., 1024) = 1024 read(32, "c rdrand lahf_lm abm 3dnowprefet"..., 1024) = 1024 read(32, "i7-12700H\nstepping\t: 3\nmicrocode"..., 1024) = 1024 read(32, "e waitpkg gfni vaes vpclmulqdq r"..., 1024) = 1024 read(32, "gb rdtscp lm constant_tsc art ar"..., 1024) = 1024 read(32, " spec_store_bypass swapgs eibrs_"..., 1024) = 1024 read(32, "lexpriority ept vpid ept_ad fsgs"..., 1024) = 1024 read(32, "ings\t: 20\ncore id\t\t: 12\ncpu core"..., 1024) = 1024 read(32, "ch_capabilities\nvmx flags\t: vnmi"..., 1024) = 1024 read(32, "mperf tsc_known_freq pni pclmulq"..., 1024) = 1024 read(32, "ress sizes\t: 39 bits physical, 4"..., 1024) = 1024 read(32, "lflushopt clwb intel_pt sha_ni x"..., 1024) = 1024 read(32, " yes\ncpuid level\t: 32\nwp\t\t: yes\n"..., 1024) = 1024 read(32, "expriority apicv tsc_offset vtpr"..., 1024) = 1024 read(32, " pdcm sse4_1 sse4_2 x2apic movbe"..., 1024) = 1024 read(32, "ineIntel\ncpu family\t: 6\nmodel\t\t:"..., 1024) = 1024 read(32, "ida arat pln pts hwp hwp_notify "..., 1024) = 1024 read(32, "ca cmov pat pse36 clflush dts ac"..., 1024) = 1024 read(32, "_vmcs ept_mode_based_exec tsc_sc"..., 1024) = 1024 read(32, "m 3dnowprefetch cpuid_fault epb "..., 1024) = 1024 read(32, "\t: 3\nmicrocode\t: 0x430\ncpu MHz\t\t"..., 1024) = 1024 read(32, "vaes vpclmulqdq rdpid movdiri mo"..., 1024) = 1024 read(32, "constant_tsc art arch_perfmon pe"..., 1024) = 1024 read(32, "ypass swapgs eibrs_pbrsb\nbogomip"..., 1024) = 1024 read(32, " ept vpid ept_ad fsgsbase tsc_ad"..., 1024) = 1024 read(32, "core id\t\t: 29\ncpu cores\t: 14\napi"..., 1024) = 1024 read(32, "ities\nvmx flags\t: vnmi preemptio"..., 1024) = 1024 read(32, "_known_freq pni pclmulqdq dtes64"..., 1024) = 1024 read(32, "s\t: 39 bits physical, 48 bits vi"..., 1024) = 1024 read(32, "t clwb intel_pt sha_ni xsaveopt "..., 1024) = 708 read(32, "", 1024) = 0 close(32) = 0 brk(0x55ff1dd1a000) = 0x55ff1dd1a000 brk(0x55ff1dd3b000) = 0x55ff1dd3b000 brk(0x55ff1dd64000) = 0x55ff1dd64000 brk(0x55ff1dd8c000) = 0x55ff1dd8c000 brk(0x55ff1ddad000) = 0x55ff1ddad000 brk(0x55ff1ddce000) = 0x55ff1ddce000 brk(0x55ff1ddef000) = 0x55ff1ddef000 brk(0x55ff1de17000) = 0x55ff1de17000 brk(0x55ff1de38000) = 0x55ff1de38000 brk(0x55ff1de59000) = 0x55ff1de59000 brk(0x55ff1de7a000) = 0x55ff1de7a000 brk(0x55ff1dea2000) = 0x55ff1dea2000 brk(0x55ff1dec3000) = 0x55ff1dec3000 brk(0x55ff1dee4000) = 0x55ff1dee4000 brk(0x55ff1df05000) = 0x55ff1df05000 brk(0x55ff1df2d000) = 0x55ff1df2d000 brk(0x55ff1df4e000) = 0x55ff1df4e000 brk(0x55ff1df6f000) = 0x55ff1df6f000 brk(0x55ff1df90000) = 0x55ff1df90000 brk(0x55ff1dfb8000) = 0x55ff1dfb8000 uname({sysname="Linux", nodename="LOAMRI-Legion", ...}) = 0 uname({sysname="Linux", nodename="LOAMRI-Legion", ...}) = 0 openat(AT_FDCWD, "/proc/meminfo", O_RDONLY) = 32 newfstatat(32, "", {st_mode=S_IFREG|0444, st_size=0, ...}, AT_EMPTY_PATH) = 0 read(32, "MemTotal: 16156924 kB\nMemF"..., 1024) = 1024 read(32, "pted: 0 kB\nAnonHugePages: "..., 1024) = 395 read(32, "", 1024) = 0 close(32) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 access("/home/antonio/.config/slicer.org/Slicer.ini", F_OK) = 0 openat(AT_FDCWD, "/home/antonio/.config/slicer.org/Slicer.ini", O_RDWR|O_CREAT|O_CLOEXEC, 0666) = 32 close(32) = 0 openat(AT_FDCWD, "/home/antonio/.config/slicer.org/Slicer.ini.lock", O_RDWR|O_CREAT|O_EXCL|O_CLOEXEC, 0666) = 32 flock(32, LOCK_EX|LOCK_NB) = 0 openat(AT_FDCWD, "/proc/sys/kernel/random/boot_id", O_RDONLY|O_CLOEXEC) = 33 read(33, "738c301f-54a0-4d05-bc07-07f88f34"..., 36) = 36 close(33) = 0 openat(AT_FDCWD, "/var/lib/dbus/machine-id", O_RDONLY|O_CLOEXEC) = 33 read(33, "10b971ac1a304176906b1f6a23827476", 32) = 32 close(33) = 0 uname({sysname="Linux", nodename="LOAMRI-Legion", ...}) = 0 getpid() = 1377215 readlink("/proc/1377215/exe", "/home/antonio/Documents/Slicer-S"..., 256) = 85 getpid() = 1377215 write(32, "1377215\nSlicerApp-real\nLOAMRI-Le"..., 107) = 107 fdatasync(32) = 0 access("/home/antonio/.config/slicer.org/Slicer.ini", F_OK) = 0 statx(AT_FDCWD, "/home/antonio/.config/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, {stx_mask=STATX_ALL|STATX_MNT_ID, stx_attributes=0, stx_mode=S_IFREG|0664, stx_size=21247, ...}) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 access("/home/antonio/.config/slicer.org/Slicer.ini", F_OK) = 0 access("/home/antonio/.config/slicer.org/Slicer.ini", W_OK) = 0 statx(AT_FDCWD, "/home/antonio/.config/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, {stx_mask=STATX_ALL|STATX_MNT_ID, stx_attributes=0, stx_mode=S_IFREG|0664, stx_size=21247, ...}) = 0 statx(AT_FDCWD, "/home/antonio/.config/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT|AT_SYMLINK_NOFOLLOW, STATX_ALL, {stx_mask=STATX_ALL|STATX_MNT_ID, stx_attributes=0, stx_mode=S_IFREG|0664, stx_size=21247, ...}) = 0 openat(AT_FDCWD, "/home/antonio/.config/slicer.org", O_RDWR|O_CLOEXEC|O_TMPFILE, 0600) = 33 statx(AT_FDCWD, "/home/antonio/.config/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, {stx_mask=STATX_ALL|STATX_MNT_ID, stx_attributes=0, stx_mode=S_IFREG|0664, stx_size=21247, ...}) = 0 access("/home/antonio/.config/slicer.org/Slicer.ini", R_OK) = 0 access("/home/antonio/.config/slicer.org/Slicer.ini", W_OK) = 0 access("/home/antonio/.config/slicer.org/Slicer.ini", X_OK) = -1 EACCES (Permission denied) fchmod(33, 0664) = 0 statx(33, "", AT_STATX_SYNC_AS_STAT|AT_EMPTY_PATH, STATX_ALL, {stx_mask=STATX_ALL|STATX_MNT_ID, stx_attributes=0, stx_mode=S_IFREG|0664, stx_size=0, ...}) = 0 write(33, "[General]\nDatabaseDirectory_0.7."..., 15504) = 15504 write(33, "RecentFiles\\7\\file=@Variant(\\0\\0"..., 5743) = 5743 lseek(33, 0, SEEK_SET) = 0 fdatasync(33) = 0 linkat(AT_FDCWD, "/proc/self/fd/33", AT_FDCWD, "/home/antonio/.config/slicer.org/Slicer.ini", AT_SYMLINK_FOLLOW) = -1 EEXIST (File exists) linkat(AT_FDCWD, "/proc/self/fd/33", AT_FDCWD, "/home/antonio/.config/slicer.org/Slicer.ini.iHMkiG", AT_SYMLINK_FOLLOW) = 0 close(33) = 0 rename("/home/antonio/.config/slicer.org/Slicer.ini.iHMkiG", "/home/antonio/.config/slicer.org/Slicer.ini") = 0 statx(AT_FDCWD, "/home/antonio/.config/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, {stx_mask=STATX_ALL|STATX_MNT_ID, stx_attributes=0, stx_mode=S_IFREG|0664, stx_size=21247, ...}) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 close(32) = 0 unlink("/home/antonio/.config/slicer.org/Slicer.ini.lock") = 0 access("/home/antonio/.config/slicer.org.ini", F_OK) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/home/antonio/.config/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffe779c57e0) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/home/antonio/.config/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffe779c5780) = -1 ENOENT (No such file or directory) access("/etc/xdg/xdg-cinnamon/slicer.org/Slicer.ini", F_OK) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/xdg-cinnamon/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffe779c57e0) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/xdg-cinnamon/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffe779c5780) = -1 ENOENT (No such file or directory) access("/etc/xdg/slicer.org/Slicer.ini", F_OK) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffe779c57e0) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/slicer.org/Slicer.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffe779c5780) = -1 ENOENT (No such file or directory) access("/etc/xdg/xdg-cinnamon/slicer.org.ini", F_OK) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/xdg-cinnamon/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffe779c57e0) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/xdg-cinnamon/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffe779c5780) = -1 ENOENT (No such file or directory) access("/etc/xdg/slicer.org.ini", F_OK) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffe779c57e0) = -1 ENOENT (No such file or directory) statx(AT_FDCWD, "/etc/xdg/slicer.org.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, 0x7ffe779c5780) = -1 ENOENT (No such file or directory) newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 statx(AT_FDCWD, "/home/antonio/Documents/Slicer-SuperBuild-Debug-5.4.0/Slicer-build/slicer.org/Slicer-31938.ini", AT_STATX_SYNC_AS_STAT, STATX_ALL, {stx_mask=STATX_ALL|STATX_MNT_ID, stx_attributes=0, stx_mode=S_IFREG|0664, stx_size=254, ...}) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 newfstatat(AT_FDCWD, "/etc/localtime", {st_mode=S_IFREG|0644, st_size=1444, ...}, 0) = 0 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 write(5, "\1\0\0\0\0\0\0\0", 8) = 8 --- SIGSEGV {si_signo=SIGSEGV, si_code=SEGV_MAPERR, si_addr=0x7fa47d6f96b8} --- +++ killed by SIGSEGV (core dumped) +++ Segmentation fault (core dumped) ``` I don’t know if changed something… ---
### Author: ![lassoan](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.slicer.org/lassoan/32/13_2.png) [@lassoan](https://discourse.slicer.org/u/lassoan) #### Post date: [November 23, 2023, 8:52pm UTC](https://discourse.slicer.org/t/slicer-fresh-build-crash-start-but-executes-with-sudo-permissions/32978/7 "2023-11-23T20:52:04Z")
Can you enable the current user to access this file, too? ``` /home/antonio/.config/slicer.org/Slicer.ini ``` ---
### Author: ![acsenrafilho](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.slicer.org/acsenrafilho/32/6217_2.png) [@acsenrafilho](https://discourse.slicer.org/u/acsenrafilho) #### Post date: [November 24, 2023, 11:35am UTC](https://discourse.slicer.org/t/slicer-fresh-build-crash-start-but-executes-with-sudo-permissions/32978/8 "2023-11-24T11:35:59Z")
Sure, but I listed all files in `.config/slicer.org` path and all of them were already to access by me. ```auto antonio@LOAMRI-Legion:~/.config/slicer.org$ ls -la total 296 drwxrwxr-x 2 antonio antonio 4096 Nov 23 18:14 . drwxr-xr-x 29 antonio antonio 4096 Nov 23 18:14 .. -rw-rw-r-- 1 antonio antonio 2116 Nov 18 13:28 qSlicerAboutDialogTest1.ini -rw-rw-r-- 1 antonio antonio 2549 Nov 18 13:28 qSlicerAnnotationsModuleGenericTest.ini -rw-rw-r-- 1 antonio antonio 2579 Nov 18 13:28 qSlicerAnnotationsModuleWidgetGenericTest.ini -rw-rw-r-- 1 antonio antonio 2116 Nov 18 13:28 qSlicerApplicationTest1.ini -rw-rw-r-- 1 antonio antonio 2126 Nov 18 13:29 qSlicerAppMainWindowTest1.ini -rw-rw-r-- 1 antonio antonio 2156 Nov 18 13:28 qSlicerCamerasModuleGenericTest.ini -rw-rw-r-- 1 antonio antonio 2186 Nov 18 13:28 qSlicerCamerasModuleWidgetGenericTest.ini -rw-rw-r-- 1 antonio antonio 1939 Nov 18 13:28 qSlicerCLIModuleTest1.ini -rw-rw-r-- 1 antonio antonio 2151 Nov 18 13:28 qSlicerColorsModuleGenericTest.ini -rw-rw-r-- 1 antonio antonio 2181 Nov 18 13:28 qSlicerColorsModuleWidgetGenericTest.ini -rw-rw-r-- 1 antonio antonio 3232 Nov 18 13:28 qSlicerCropVolumeModuleGenericTest.ini -rw-rw-r-- 1 antonio antonio 3262 Nov 18 13:28 qSlicerCropVolumeModuleWidgetGenericTest.ini -rw-rw-r-- 1 antonio antonio 2111 Nov 18 13:28 qSlicerDataDialogTest1.ini -rw-rw-r-- 1 antonio antonio 2286 Nov 18 13:28 qSlicerDataModuleGenericTest.ini -rw-rw-r-- 1 antonio antonio 2316 Nov 18 13:28 qSlicerDataModuleWidgetGenericTest.ini -rw-rw-r-- 1 antonio antonio 2191 Nov 18 13:29 qSlicerDynamicModelerModuleGenericTest.ini -rw-rw-r-- 1 antonio antonio 2221 Nov 18 13:29 qSlicerDynamicModelerModuleWidgetGenericTest.ini -rw-rw-r-- 1 antonio antonio 2146 Nov 18 13:28 qSlicerErrorReportDialogTest1.ini -rw-rw-r-- 1 antonio antonio 2176 Nov 18 13:28 qSlicerEventBrokerModuleGenericTest.ini -rw-rw-r-- 1 antonio antonio 2206 Nov 18 13:28 qSlicerEventBrokerModuleWidgetGenericTest.ini -rw-rw-r-- 1 antonio antonio 3256 Nov 18 13:28 qSlicerMarkupsModuleGenericTest.ini -rw-rw-r-- 1 antonio antonio 3286 Nov 18 13:28 qSlicerMarkupsModuleWidgetGenericTest.ini -rw-rw-r-- 1 antonio antonio 2264 Nov 18 13:28 qSlicerModelsModuleGenericTest.ini -rw-rw-r-- 1 antonio antonio 2294 Nov 18 13:28 qSlicerModelsModuleWidgetGenericTest.ini -rw-rw-r-- 1 antonio antonio 2151 Nov 18 13:28 qSlicerModelsModuleWidgetTest1.ini -rw-rw-r-- 1 antonio antonio 2171 Nov 18 13:28 qSlicerModelsModuleWidgetTestScene.ini -rw-rw-r-- 1 antonio antonio 2116 Nov 18 13:28 qSlicerModulePanelTest1.ini -rw-rw-r-- 1 antonio antonio 130 Nov 18 13:28 qSlicerModulePanelTest2.ini -rw-rw-r-- 1 antonio antonio 2141 Nov 18 13:28 qSlicerMouseModeToolBarTest1.ini -rw-rw-r-- 1 antonio antonio 2146 Nov 18 13:28 qSlicerPlotsModuleGenericTest.ini -rw-rw-r-- 1 antonio antonio 2176 Nov 18 13:28 qSlicerPlotsModuleWidgetGenericTest.ini -rw-rw-r-- 1 antonio antonio 1949 Nov 18 13:28 qSlicerPyCLIModuleTest1.ini -rw-rw-r-- 1 antonio antonio 2161 Nov 18 13:28 qSlicerReformatModuleGenericTest.ini -rw-rw-r-- 1 antonio antonio 2191 Nov 18 13:28 qSlicerReformatModuleWidgetGenericTest.ini -rw-rw-r-- 1 antonio antonio 2238 Nov 18 13:28 qSlicerSaveDataDialogCustomFileWriterTest.ini -rw-rw-r-- 1 antonio antonio 2171 Nov 18 13:28 qSlicerSceneViewsModuleGenericTest.ini -rw-rw-r-- 1 antonio antonio 2201 Nov 18 13:28 qSlicerSceneViewsModuleWidgetGenericTest.ini -rw-rw-r-- 1 antonio antonio 2459 Nov 18 13:28 qSlicerSegmentationsModuleGenericTest.ini -rw-rw-r-- 1 antonio antonio 2489 Nov 18 13:28 qSlicerSegmentationsModuleWidgetGenericTest.ini -rw-rw-r-- 1 antonio antonio 2166 Nov 18 13:28 qSlicerSequencesModuleGenericTest.ini -rw-rw-r-- 1 antonio antonio 2196 Nov 18 13:28 qSlicerSequencesModuleWidgetGenericTest.ini -rw-rw-r-- 1 antonio antonio 2461 Nov 18 13:28 qSlicerSubjectHierarchyModuleGenericTest.ini -rw-rw-r-- 1 antonio antonio 2491 Nov 18 13:28 qSlicerSubjectHierarchyModuleWidgetGenericTest.ini -rw-rw-r-- 1 antonio antonio 2151 Nov 18 13:28 qSlicerTablesModuleGenericTest.ini -rw-rw-r-- 1 antonio antonio 2181 Nov 18 13:28 qSlicerTablesModuleWidgetGenericTest.ini -rw-rw-r-- 1 antonio antonio 2263 Nov 18 13:28 qSlicerTerminologiesModuleGenericTest.ini -rw-rw-r-- 1 antonio antonio 2293 Nov 18 13:28 qSlicerTerminologiesModuleWidgetGenericTest.ini -rw-rw-r-- 1 antonio antonio 2146 Nov 18 13:28 qSlicerTextsModuleGenericTest.ini -rw-rw-r-- 1 antonio antonio 2176 Nov 18 13:28 qSlicerTextsModuleWidgetGenericTest.ini -rw-rw-r-- 1 antonio antonio 3232 Nov 18 13:28 qSlicerTransformsModuleGenericTest.ini -rw-rw-r-- 1 antonio antonio 3262 Nov 18 13:28 qSlicerTransformsModuleWidgetGenericTest.ini -rw-rw-r-- 1 antonio antonio 2612 Nov 18 13:28 qSlicerUnitsModuleGenericTest.ini -rw-rw-r-- 1 antonio antonio 2642 Nov 18 13:28 qSlicerUnitsModuleWidgetGenericTest.ini -rw-rw-r-- 1 antonio antonio 2196 Nov 18 13:28 qSlicerViewControllersModuleGenericTest.ini -rw-rw-r-- 1 antonio antonio 2226 Nov 18 13:28 qSlicerViewControllersModuleWidgetGenericTest.ini -rw-rw-r-- 1 antonio antonio 2410 Nov 18 13:28 qSlicerVolumeRenderingModuleGenericTest.ini -rw-rw-r-- 1 antonio antonio 2440 Nov 18 13:28 qSlicerVolumeRenderingModuleWidgetGenericTest.ini -rw-rw-r-- 1 antonio antonio 2410 Nov 18 13:28 qSlicerVolumeRenderingModuleWidgetTest1.ini -rw-rw-r-- 1 antonio antonio 2410 Nov 18 13:28 qSlicerVolumeRenderingModuleWidgetTest2.ini -rw-rw-r-- 1 antonio antonio 2171 Nov 18 13:28 qSlicerVolumesIOOptionsWidgetTest1.ini -rw-rw-r-- 1 antonio antonio 3217 Nov 18 13:28 qSlicerVolumesModuleGenericTest.ini -rw-rw-r-- 1 antonio antonio 3247 Nov 18 13:28 qSlicerVolumesModuleWidgetGenericTest.ini -rw-rw-r-- 1 antonio antonio 2156 Nov 18 13:28 qSlicerVolumesModuleWidgetTest1.ini -rw-rw-r-- 1 antonio antonio 2156 Nov 18 13:28 qSlicerWelcomeModuleGenericTest.ini -rw-rw-r-- 1 antonio antonio 2186 Nov 18 13:28 qSlicerWelcomeModuleWidgetGenericTest.ini -rw-rw-r-- 1 antonio antonio 20697 Nov 23 18:14 Slicer.ini -rw-rw-r-- 1 antonio antonio 120 Nov 18 13:35 Slicer-tmp.ini ``` I made a search in the `Slicer-Superbuild` folder to look at the files with `root` access, and there are two of them: ```auto antonio@LOAMRI-Legion:~/Documents/Slicer-SuperBuild-Debug-5.4.0$ find . -user root ./Slicer-build/lib/Slicer-5.4/qt-scripted-modules/SegmentEditorEffects/ __pycache__ / __init__.cpython-39.pyc ./VTK-build/lib/python3.9/site-packages/vtkmodules/util/ __pycache__ /numpy_support.cpython-39.pyc antonio@LOAMRI-Legion:~/Documents/Slicer-SuperBuild-Debug-5.4.0$ ls -la ./Slicer-build/lib/Slicer-5.4/qt-scripted-modules/SegmentEditorEffects/ __pycache__ / __init__.cpython-39.pyc -rw-r--r-- 1 root root 1704 Nov 21 18:02 ./Slicer-build/lib/Slicer-5.4/qt-scripted-modules/SegmentEditorEffects/ __pycache__ / __init__.cpython-39.pyc antonio@LOAMRI-Legion:~/Documents/Slicer-SuperBuild-Debug-5.4.0$ ls -la ./VTK-build/lib/python3.9/site-packages/vtkmodules/util/ __pycache__ /numpy_support.cpython-39.pyc -rw-r--r-- 1 root root 6592 Nov 21 18:02 ./VTK-build/lib/python3.9/site-packages/vtkmodules/util/ __pycache__ /numpy_support.cpython-39.pyc ``` They should be in this way? I do I need to change it to my user access? By the way, I am wandering why those changes in root access occur on those files. Is there any clue what did I do in the build process that may change it? By the way, thank you lassoan for all the attention on this matter. 🙏 ---
### Author: ![pieper](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.slicer.org/pieper/32/8_2.png) [@pieper](https://discourse.slicer.org/u/pieper) #### Post date: [November 24, 2023, 12:58pm UTC](https://discourse.slicer.org/t/slicer-fresh-build-crash-start-but-executes-with-sudo-permissions/32978/9 "2023-11-24T12:58:45Z")
Maybe when you ran `sudo ./Slicer` some python files got compiled with root-only access. Maybe do `chown -R antonio:antonio .` in your superbuild directory `.config`. Also what linux is this? Do the slicer binary packages run okay on this computer? ---
### Author: ![acsenrafilho](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.slicer.org/acsenrafilho/32/6217_2.png) [@acsenrafilho](https://discourse.slicer.org/u/acsenrafilho) #### Post date: [November 24, 2023, 3:31pm UTC](https://discourse.slicer.org/t/slicer-fresh-build-crash-start-but-executes-with-sudo-permissions/32978/10 "2023-11-24T15:31:27Z")
Hi @pieper , thanks for the ideas I’ve executed the `chown -R` command on `Slicer-Superbuild` and `.config/slicer.org` folder. All the files were changed to my user access, however the `./Slicer` execution still crashes. Sorry to not given the linux SO details before. I am using a fresh install of Linux Mint 21.2 (which is based on Ubuntu 22.04) ([link for Linux Mint release notes](https://www.linuxmint.com/rel_victoria_cinnamon.php)): ```auto antonio@LOAMRI-Legion:~/Documents/Slicer-SuperBuild-Debug-5.4.0$ uname -a Linux LOAMRI-Legion 5.15.0-89-generic #99-Ubuntu SMP Mon Oct 30 20:42:41 UTC 2023 x86_64 x86_64 x86_64 GNU/Linux ``` I also downloaded the binary packages for Slicer v5.4.0 and it executes normally. I made the same execution using the command `./Slicer --launch-verbose --application-information` just to see if this could help in anything. ```auto antonio@LOAMRI-Legion:~/Documents/Slicer-5.4.0-linux-amd64$ ./Slicer --launcher-verbose --application-information info: AdditionalSettingsFilePath [] info: LauncherSplashImagePath [/home/antonio/Documents/Slicer-5.4.0-linux-amd64/bin/Slicer-SplashScreen.png] info: LauncherSplashScreenHideDelayMs [3000] info: ApplicationToLaunch [/home/antonio/Documents/Slicer-5.4.0-linux-amd64/bin/SlicerApp-real] info: ApplicationToLaunchArguments [] info: AdditionalSettingsFilePath [] info: LauncherDir [/home/antonio/Documents/Slicer-5.4.0-linux-amd64] info: LauncherName [Slicer] info: OrganizationDomain [slicer.org] info: OrganizationName [slicer.org] info: ApplicationName [Slicer] info: ApplicationRevision [31938] info: SettingsFileName [/home/antonio/Documents/Slicer-5.4.0-linux-amd64/bin/SlicerLauncherSettings.ini] info: SettingsDir [/home/antonio/Documents/Slicer-5.4.0-linux-amd64/bin] info: UserAdditionalSettingsDir [/home/antonio/Documents/Slicer-5.4.0-linux-amd64/slicer.org] info: UserAdditionalSettingsFileName [/home/antonio/Documents/Slicer-5.4.0-linux-amd64/slicer.org/Slicer-31938.ini] info: UserAdditionalSettingsFileBaseName [] info: AdditionalSettingsDir [] info: AdditionalSettingsExcludeGroups [] info: LauncherNoSplashScreen [0] info: AdditionalLauncherHelpShortArgument [-h] info: AdditionalLauncherHelpLongArgument [--help] info: AdditionalLauncherNoSplashArguments [--no-splash,--help,--version,--home,--program-path,--no-main-window,--settings-path,--temporary-path] info: DetachApplicationToLaunch [0] info: LoadEnvironment [-1] info: LauncherSplashImagePath [/home/antonio/Documents/Slicer-5.4.0-linux-amd64/bin/Slicer-SplashScreen.png] info: LauncherSplashScreenHideDelayMs [3000] info: ApplicationToLaunch [/home/antonio/Documents/Slicer-5.4.0-linux-amd64/bin/SlicerApp-real] info: ApplicationToLaunchArguments [] info: -> [/home/antonio/Documents/Slicer-5.4.0-linux-amd64] info: -> [Slicer] info: (RegularSettings) -> [/home/antonio/Documents/Slicer-5.4.0-linux-amd64/bin] info: (UserAdditionalSettings) -> [/home/antonio/Documents/Slicer-5.4.0-linux-amd64/slicer.org] info: (AdditionalSettings) -> [] info: -> [:] info: Setting env. variable [QTWEBENGINE_DISABLE_SANDBOX]:1 info: Setting env. variable [SLICER_HOME]:/home/antonio/Documents/Slicer-5.4.0-linux-amd64/bin/.. info: Setting env. variable [PIP_REQUIRE_VIRTUALENV]:0 info: Setting env. variable [ITK_AUTOLOAD_PATH]:/home/antonio/Documents/Slicer-5.4.0-linux-amd64/bin/../lib/Slicer-5.4/ITKFactories info: Setting env. variable [PYTHONNOUSERSITE]:1 info: Setting env. variable [PYTHONHOME]:/home/antonio/Documents/Slicer-5.4.0-linux-amd64/bin/../lib/Python info: Setting env. variable [SSL_CERT_FILE]:/home/antonio/Documents/Slicer-5.4.0-linux-amd64/bin/../share/Slicer-5.4/Slicer.crt info: Setting env. variable [LibraryPaths]:/home/antonio/Documents/Slicer-5.4.0-linux-amd64/slicer.org/Extensions-31938/AnomalousFiltersExtension/lib/Slicer-5.4:/home/antonio/Documents/Slicer-5.4.0-linux-amd64/slicer.org/Extensions-31938/AnomalousFiltersExtension/lib/Slicer-5.4/cli-modules:/home/antonio/Documents/Slicer-5.4.0-linux-amd64/slicer.org/Extensions-31938/SlicerDMRI/lib/Slicer-5.4:/home/antonio/Documents/Slicer-5.4.0-linux-amd64/slicer.org/Extensions-31938/SlicerDMRI/lib/Slicer-5.4/cli-modules:/home/antonio/Documents/Slicer-5.4.0-linux-amd64/slicer.org/Extensions-31938/SlicerDMRI/lib/Slicer-5.4/qt-loadable-modules:/home/antonio/Documents/Slicer-5.4.0-linux-amd64/slicer.org/Extensions-31938/UKFTractography/lib/Slicer-5.4:/home/antonio/Documents/Slicer-5.4.0-linux-amd64/slicer.org/Extensions-31938/UKFTractography/lib/Slicer-5.4/cli-modules:/home/antonio/Documents/Slicer-5.4.0-linux-amd64/slicer.org/Extensions-31938/UKFTractography/lib/Slicer-5.4/qt-loadable-modules:/home/antonio/Documents/Slicer-5.4.0-linux-amd64/bin/../bin:/home/antonio/Documents/Slicer-5.4.0-linux-amd64/bin/../lib/Slicer-5.4:/home/antonio/Documents/Slicer-5.4.0-linux-amd64/bin/../lib/Slicer-5.4/cli-modules:/home/antonio/Documents/Slicer-5.4.0-linux-amd64/bin/../lib/Slicer-5.4/qt-loadable-modules:/home/antonio/Documents/Slicer-5.4.0-linux-amd64/../lib/Slicer-5.4/qt-loadable-modules:/home/antonio/Documents/Slicer-5.4.0-linux-amd64/bin/../lib/Python/lib:/home/antonio/Documents/Slicer-5.4.0-linux-amd64/bin/../lib:/home/antonio/Documents/Slicer-5.4.0-linux-amd64/bin/../lib/Teem-1.12.0:/home/antonio/Documents/Slicer-5.4.0-linux-amd64/bin/../lib/PythonQt:/home/antonio/Documents/Slicer-5.4.0-linux-amd64/bin/../lib/Python/lib/python3.9/site-packages/numpy/core:/home/antonio/Documents/Slicer-5.4.0-linux-amd64/bin/../lib/Python/lib/python3.9/site-packages/numpy/lib info: Setting env. variable [LD_LIBRARY_PATH]:/home/antonio/Documents/Slicer-5.4.0-linux-amd64/slicer.org/Extensions-31938/AnomalousFiltersExtension/lib/Slicer-5.4:/home/antonio/Documents/Slicer-5.4.0-linux-amd64/slicer.org/Extensions-31938/AnomalousFiltersExtension/lib/Slicer-5.4/cli-modules:/home/antonio/Documents/Slicer-5.4.0-linux-amd64/slicer.org/Extensions-31938/SlicerDMRI/lib/Slicer-5.4:/home/antonio/Documents/Slicer-5.4.0-linux-amd64/slicer.org/Extensions-31938/SlicerDMRI/lib/Slicer-5.4/cli-modules:/home/antonio/Documents/Slicer-5.4.0-linux-amd64/slicer.org/Extensions-31938/SlicerDMRI/lib/Slicer-5.4/qt-loadable-modules:/home/antonio/Documents/Slicer-5.4.0-linux-amd64/slicer.org/Extensions-31938/UKFTractography/lib/Slicer-5.4:/home/antonio/Documents/Slicer-5.4.0-linux-amd64/slicer.org/Extensions-31938/UKFTractography/lib/Slicer-5.4/cli-modules:/home/antonio/Documents/Slicer-5.4.0-linux-amd64/slicer.org/Extensions-31938/UKFTractography/lib/Slicer-5.4/qt-loadable-modules:/home/antonio/Documents/Slicer-5.4.0-linux-amd64/bin/../bin:/home/antonio/Documents/Slicer-5.4.0-linux-amd64/bin/../lib/Slicer-5.4:/home/antonio/Documents/Slicer-5.4.0-linux-amd64/bin/../lib/Slicer-5.4/cli-modules:/home/antonio/Documents/Slicer-5.4.0-linux-amd64/bin/../lib/Slicer-5.4/qt-loadable-modules:/home/antonio/Documents/Slicer-5.4.0-linux-amd64/../lib/Slicer-5.4/qt-loadable-modules:/home/antonio/Documents/Slicer-5.4.0-linux-amd64/bin/../lib/Python/lib:/home/antonio/Documents/Slicer-5.4.0-linux-amd64/bin/../lib:/home/antonio/Documents/Slicer-5.4.0-linux-amd64/bin/../lib/Teem-1.12.0:/home/antonio/Documents/Slicer-5.4.0-linux-amd64/bin/../lib/PythonQt:/home/antonio/Documents/Slicer-5.4.0-linux-amd64/bin/../lib/Python/lib/python3.9/site-packages/numpy/core:/home/antonio/Documents/Slicer-5.4.0-linux-amd64/bin/../lib/Python/lib/python3.9/site-packages/numpy/lib info: Setting env. variable [PATH]:/home/antonio/Documents/Slicer-5.4.0-linux-amd64/slicer.org/Extensions-31938/AnomalousFiltersExtension/lib/Slicer-5.4/cli-modules:/home/antonio/Documents/Slicer-5.4.0-linux-amd64/slicer.org/Extensions-31938/SlicerDMRI/lib/Slicer-5.4/cli-modules:/home/antonio/Documents/Slicer-5.4.0-linux-amd64/slicer.org/Extensions-31938/UKFTractography/lib/Slicer-5.4/cli-modules:/home/antonio/Documents/Slicer-5.4.0-linux-amd64/bin/../bin:/home/antonio/Documents/Slicer-5.4.0-linux-amd64/bin/../lib/Slicer-5.4/cli-modules:/home/antonio/Documents/Slicer-5.4.0-linux-amd64/bin/../lib/Slicer-5.4/qt-loadable-modules info: Setting env. variable [QT_PLUGIN_PATH]:/home/antonio/Documents/Slicer-5.4.0-linux-amd64/bin/../lib/QtPlugins info: Setting env. variable [PYTHONPATH]:/home/antonio/Documents/Slicer-5.4.0-linux-amd64/slicer.org/Extensions-31938/SlicerDMRI/lib/Slicer-5.4/qt-scripted-modules:/home/antonio/Documents/Slicer-5.4.0-linux-amd64/slicer.org/Extensions-31938/UKFTractography/lib/Slicer-5.4/qt-scripted-modules:/home/antonio/Documents/Slicer-5.4.0-linux-amd64/bin/../lib/Slicer-5.4:/home/antonio/Documents/Slicer-5.4.0-linux-amd64/bin/../lib/Slicer-5.4/qt-scripted-modules:/home/antonio/Documents/Slicer-5.4.0-linux-amd64/bin/../lib/Slicer-5.4/qt-loadable-modules:/home/antonio/Documents/Slicer-5.4.0-linux-amd64/bin/../lib/vtkTeem:/home/antonio/Documents/Slicer-5.4.0-linux-amd64/bin/../bin/Python:/home/antonio/Documents/Slicer-5.4.0-linux-amd64/bin/../lib/Slicer-5.4/qt-loadable-modules/Python:/home/antonio/Documents/Slicer-5.4.0-linux-amd64/bin/../lib/Python/lib/python3.9:/home/antonio/Documents/Slicer-5.4.0-linux-amd64/bin/../lib/Python/lib/python3.9/lib-dynload:/home/antonio/Documents/Slicer-5.4.0-linux-amd64/bin/../lib/Python/lib/python3.9/site-packages:/home/antonio/Documents/Slicer-5.4.0-linux-amd64/bin/../lib/python3.9/site-packages info: Starting [/home/antonio/Documents/Slicer-5.4.0-linux-amd64/bin/SlicerApp-real] info: argument [--application-information] info: launcher-timeout (ms) [-1000] info: DisableSplash [0] Session start time .......: 2023-11-24 12:30:01 Slicer version ...........: 5.4.0 (revision 31938 / 311cb26) linux-amd64 - installed release Operating system .........: Linux / 5.15.0-89-generic / #99-Ubuntu SMP Mon Oct 30 20:42:41 UTC 2023 / UTF-8 - 64-bit Memory ...................: 15778 MB physical, 2047 MB virtual CPU ......................: GenuineIntel 12th Gen Intel(R) Core(TM) i7-12700H, 14 cores, 20 logical processors VTK configuration ........: OpenGL2 rendering, Sequential threading Qt configuration .........: version 5.15.2, with SSL, requested OpenGL 3.2 (core profile) Internationalization .....: disabled, language= Developer mode ...........: disabled Application path .........: /home/antonio/Documents/Slicer-5.4.0-linux-amd64/bin Additional module paths ..: slicer.org/Extensions-31938/AnomalousFiltersExtension/lib/Slicer-5.4/cli-modules, slicer.org/Extensions-31938/SlicerDMRI/lib/Slicer-5.4/cli-modules, slicer.org/Extensions-31938/SlicerDMRI/lib/Slicer-5.4/qt-loadable-modules, slicer.org/Extensions-31938/SlicerDMRI/lib/Slicer-5.4/qt-scripted-modules, slicer.org/Extensions-31938/UKFTractography/lib/Slicer-5.4/cli-modules, slicer.org/Extensions-31938/UKFTractography/lib/Slicer-5.4/qt-loadable-modules, slicer.org/Extensions-31938/UKFTractography/lib/Slicer-5.4/qt-scripted-modules Switch to module: "Welcome" ``` ---
### Author: ![pieper](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.slicer.org/pieper/32/8_2.png) [@pieper](https://discourse.slicer.org/u/pieper) #### Post date: [November 24, 2023, 6:10pm UTC](https://discourse.slicer.org/t/slicer-fresh-build-crash-start-but-executes-with-sudo-permissions/32978/11 "2023-11-24T18:10:32Z")
Hmm, that’s odd. I don’t have any experience with linux mint, but I can say that I did a build from source this morning on a ubuntu 20.04 with no issues. Maybe @acsenrafilho you could start a fresh build and see if the issue recurs? Or perhaps as a fallback install docker and try a different distribution. ---
### Author: ![acsenrafilho](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.slicer.org/acsenrafilho/32/6217_2.png) [@acsenrafilho](https://discourse.slicer.org/u/acsenrafilho) #### Post date: [November 25, 2023, 3:58pm UTC](https://discourse.slicer.org/t/slicer-fresh-build-crash-start-but-executes-with-sudo-permissions/32978/12 "2023-11-25T15:58:12Z")
Indeed this is odd. I have been using Slicer on Linux Mint for several years (since version 19) and it is the first time I have seen this issue with file permissions on execution. I am wondering if I may have done something wrong with the dependencies installations or if the cmake setup had some parameters that I need to change. Just to be sure: 1. I followed the installation procedure in the Slicer documentation ([relative to Linux section](https://slicer.readthedocs.io/en/latest/developer_guide/build_instructions/linux.html)) 2. I installed the dependencies following the [Ubuntu recommendations](https://slicer.readthedocs.io/en/latest/developer_guide/build_instructions/linux.html#ubuntu-23-04-lunar-lobster) (since Linux Mint is based on Ubuntu) 3. The cmake version used was 3.28 which I [installed from source](https://cmake.org/download/) (using the cmake installation recommendations) The rest of the process I don´t know what gives us a clue… In your opinion, what could be the most probable issue? is it something about Python? The OpenSSL error at first starting execution have something related to it? I will try to build Slicer again, but I don´t know what parameter may be better to change. Is there any recommendation? or try to use the “default” build again? ---
### Author: ![pieper](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.slicer.org/pieper/32/8_2.png) [@pieper](https://discourse.slicer.org/u/pieper) #### Post date: [November 25, 2023, 4:09pm UTC](https://discourse.slicer.org/t/slicer-fresh-build-crash-start-but-executes-with-sudo-permissions/32978/13 "2023-11-25T16:09:51Z")
I guess I would try the default again. I typically use a command like `time make -j $(nproc) |& tee buildlog` to be able to look for anything suspicious in the buildlog. But there really shouldn’t be anything requiring root permissions just to run a fresh build. My other suggestion would be to build in Debug mode or RelWithDebInfo so you can step through and see where the crash happens. ---
### Author: ![acsenrafilho](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.slicer.org/acsenrafilho/32/6217_2.png) [@acsenrafilho](https://discourse.slicer.org/u/acsenrafilho) #### Post date: [November 27, 2023, 1:35pm UTC](https://discourse.slicer.org/t/slicer-fresh-build-crash-start-but-executes-with-sudo-permissions/32978/14 "2023-11-27T13:35:38Z")
Great tip @pieper, I have made the build using the default configuration and exported the terminal output in the file bellow: [buildlog](https://drive.google.com/file/d/1m_Q8u48x4Yc400E5-n0ONuMluwZR0YsI/view?usp=sharing) This is Google Drive link, please informs me if you have some problem with the access. I tried to find something in the log, but I confess that I did not know how to filter it properly. Looking forward for any help. By the way, the `./Slicer` execution failed in the same way before. ---
### Author: ![pieper](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.slicer.org/pieper/32/8_2.png) [@pieper](https://discourse.slicer.org/u/pieper) #### Post date: [December 1, 2023, 10:07pm UTC](https://discourse.slicer.org/t/slicer-fresh-build-crash-start-but-executes-with-sudo-permissions/32978/15 "2023-12-01T22:07:49Z")
I don’t see anything out of the ordinary in the build log. I think single-stepping through the startup process would be the most informative: [C++ debugging on GNU/Linux systems — 3D Slicer documentation](https://slicer.readthedocs.io/en/latest/developer_guide/debugging/linuxcpp.html)