# SlicerDMRI not building on metroplex/linux

**URL:** <https://discourse.slicer.org/t/slicerdmri-not-building-on-metroplex-linux/4362>\
**Category:** Development\
**Created:** [October 11, 2018, 4:40pm UTC](https://discourse.slicer.org/t/slicerdmri-not-building-on-metroplex-linux/4362 "2018-10-11T16:40:42Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![ihnorton](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.slicer.org/ihnorton/32/9_2.png) [@ihnorton](https://discourse.slicer.org/u/ihnorton)\
**Post date:** [October 11, 2018, 4:40pm UTC](https://discourse.slicer.org/t/slicerdmri-not-building-on-metroplex-linux/4362/1 "2018-10-11T16:40:42Z")

</div>

@jcfr @Sam_Horvath our SlicerDMRI extension is not building on linux (metroplex) since 2018-10-05. Can you investigate please? There is no entry at all on the dashboard for the next days (but it is building on vasstbuild). Thanks.

---

<div class="post-metadata">

**Author:** ![jcfr](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.slicer.org/jcfr/32/17825_2.png) [@jcfr](https://discourse.slicer.org/u/jcfr)\
**Post date:** [October 11, 2018, 4:51pm UTC](https://discourse.slicer.org/t/slicerdmri-not-building-on-metroplex-linux/4362/2 "2018-10-11T16:51:53Z")

</div>

Thanks for the note. I will have a look this afternoon.

---

<div class="post-metadata">

**Author:** ![jcfr](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.slicer.org/jcfr/32/17825_2.png) [@jcfr](https://discourse.slicer.org/u/jcfr)\
**Post date:** [October 11, 2018, 9:22pm UTC](https://discourse.slicer.org/t/slicerdmri-not-building-on-metroplex-linux/4362/3 "2018-10-11T21:22:52Z")

</div>

> [@jcfr](#):
>
> this afternoon.

Considering that we lost power in our NC office, I will have a look later tomorrow.

---

<div class="post-metadata">

**Author:** ![pieper](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.slicer.org/pieper/32/8_2.png) [@pieper](https://discourse.slicer.org/u/pieper)\
**Post date:** [October 11, 2018, 9:34pm UTC](https://discourse.slicer.org/t/slicerdmri-not-building-on-metroplex-linux/4362/4 "2018-10-11T21:34:13Z")

</div>

> [@jcfr](#):
>
> Considering that we lost power in our NC office, I will have a look later tomorrow.

OMG, the hurricane? Hope it’s not too bad there.

---

<div class="post-metadata">

**Author:** ![jcfr](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.slicer.org/jcfr/32/17825_2.png) [@jcfr](https://discourse.slicer.org/u/jcfr)\
**Post date:** [October 13, 2018, 10:29am UTC](https://discourse.slicer.org/t/slicerdmri-not-building-on-metroplex-linux/4362/5 "2018-10-13T10:29:43Z")

</div>

To follow up, @ihnorton reported earlier that the extension was built during the last cycle.

---

<div class="post-metadata">

**Author:** ![ihnorton](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.slicer.org/ihnorton/32/9_2.png) [@ihnorton](https://discourse.slicer.org/u/ihnorton)\
**Post date:** [October 16, 2018, 2:05pm UTC](https://discourse.slicer.org/t/slicerdmri-not-building-on-metroplex-linux/4362/6 "2018-10-16T14:05:58Z")

</div>

Did not build again last night.

---

<div class="post-metadata">

**Author:** ![jcfr](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.slicer.org/jcfr/32/17825_2.png) [@jcfr](https://discourse.slicer.org/u/jcfr)\
**Post date:** [October 16, 2018, 2:48pm UTC](https://discourse.slicer.org/t/slicerdmri-not-building-on-metroplex-linux/4362/7 "2018-10-16T14:48:03Z")

</div>

I started the night later … It is probably a matter of time.

---

<div class="post-metadata">

**Author:** ![jcfr](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.slicer.org/jcfr/32/17825_2.png) [@jcfr](https://discourse.slicer.org/u/jcfr)\
**Post date:** [October 16, 2018, 10:17pm UTC](https://discourse.slicer.org/t/slicerdmri-not-building-on-metroplex-linux/4362/8 "2018-10-16T22:17:44Z")

</div>

It is available now (~1hr after your last message). See [http://slicer.cdash.org/index.php?project=SlicerPreview&filtercount=2&showfilters=1&filtercombine=and&field1=buildname&compare1=63&value1=DMRI&field2=site&compare2=63&value2=metroplex](http://slicer.cdash.org/index.php?project=SlicerPreview&filtercount=2&showfilters=1&filtercombine=and&field1=buildname&compare1=63&value1=DMRI&field2=site&compare2=63&value2=metroplex)