# Survey 3D-printing Slicer Software

**URL:** <https://discourse.slicer.org/t/survey-3d-printing-slicer-software/11738>\
**Category:** Support\
**Created:** [May 27, 2020, 5:09pm UTC](https://discourse.slicer.org/t/survey-3d-printing-slicer-software/11738 "2020-05-27T17:09:08Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![JaelW](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.slicer.org/jaelw/32/6943_2.png) [@JaelW](https://discourse.slicer.org/u/JaelW)\
**Post date:** [May 27, 2020, 5:09pm UTC](https://discourse.slicer.org/t/survey-3d-printing-slicer-software/11738/1 "2020-05-27T17:09:08Z")

</div>

Hello 3D-print enthusiasts,

We would like to know about your experiences with 3D-printing parameters in your current Slicer. It would be very helpful if you completed this survey. The survey is for educational purposes and completely anonymous.

> **[Microsoft Forms](https://forms.office.com/Pages/ResponsePage.aspx?id=CSmTmFqaGE2s5HI2tbXhHbTNshSsHR5AliypGXwj41FUQlVWWUtNSTRNT1hZS01DQkJFNkxKRVI3TC4u)**

Many thanks in advance!

(Sidenote: Not sure if this is allowed, but we don’t know otherwise how to reach a wide range of people. Please, let us know if there is any objection.)

---

<div class="post-metadata">

**Author:** ![jcfr](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.slicer.org/jcfr/32/17825_2.png) [@jcfr](https://discourse.slicer.org/u/jcfr)\
**Post date:** [May 27, 2020, 8:34pm UTC](https://discourse.slicer.org/t/survey-3d-printing-slicer-software/11738/2 "2020-05-27T20:34:51Z")

</div>

Thanks for reaching out

While 3D Slicer is used in the context of 3D printing. See [https://www.slicer.org/wiki/Documentation/Nightly/Training#Segmentation\_for\_3D\_printing](https://www.slicer.org/wiki/Documentation/Nightly/Training#Segmentation_for_3D_printing)

Based on the survey questions, it looks like you are interested in `Slic3r` and not `3D Slicer`. These are two different software.