# Uploading DICOM files

**URL:** <https://discourse.slicer.org/t/uploading-dicom-files/11550>\
**Category:** Support\
**Created:** [May 15, 2020, 1:32am UTC](https://discourse.slicer.org/t/uploading-dicom-files/11550 "2020-05-15T01:32:32Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Bassam](https://avatars.discourse-cdn.com/v4/letter/b/b38774/32.png) [@Bassam](https://discourse.slicer.org/u/Bassam)\
**Post date:** [May 15, 2020, 1:32am UTC](https://discourse.slicer.org/t/uploading-dicom-files/11550/1 "2020-05-15T01:32:32Z")

</div>

Hi,

Kindly, how can I display the whole view for DICOM images which were been taken in an oblique position ?

I have an images for the pancreas which were acquired in an oblique slices, and after I uploaded these images into the slicer, parts of the images are disappeared ? and if I would like to segment the pancreas in these images and then eras some parts of the segmented pancreas in a certain slice, the up and the down slices were been also erased.

Thanks all

---

<div class="post-metadata">

**Author:** ![joechenrh](https://avatars.discourse-cdn.com/v4/letter/j/51bf81/32.png) [@joechenrh](https://discourse.slicer.org/u/joechenrh)\
**Post date:** [May 15, 2020, 6:00am UTC](https://discourse.slicer.org/t/uploading-dicom-files/11550/2 "2020-05-15T06:00:03Z")

</div>

Maybe you can use Reformat Module.

 ![image](https://us1.discourse-cdn.com/flex002/uploads/slicer/original/3X/8/a/8af580820adc85f9daee133c050019333f2271a4.png)  
I only aujusted the red view.

---

<div class="post-metadata">

**Author:** ![Bassam](https://avatars.discourse-cdn.com/v4/letter/b/b38774/32.png) [@Bassam](https://discourse.slicer.org/u/Bassam)\
**Post date:** [May 15, 2020, 6:18am UTC](https://discourse.slicer.org/t/uploading-dicom-files/11550/3 "2020-05-15T06:18:07Z")

</div>

Appreciate your kind assistance. Its been sorted out now.