Hello everyone, I need your support I got this stl as you can see it doesnt look good for further analysis. Can you please tell me how i can modify my stl by modifing my NIfTI data. As i dont know how to edit my stl data after generating it. Any ideas and method will be with a great help. Th…

See instructions for exporting to model node (that can be saved as STL file) here: https://www.slicer.org/wiki/Documentation/Nightly/Modules/Segmentations#How_to

Prof. Doc. Andras, Dear Everyone, I was writing back to you . I have fixed the stl export issue. I used segmentaions module>export,models>export. and finally could save it as a stl file. Thank you again Professor for the support. All the best, Hanaa [image] [image]

hello sir i am also suffering to edit the .stl model. i didnot try to edit in slicer but import it to Catia v5. i am engineering student. i had converted .stl file to .igs format but it is not editable in any format. i have to perform FE analyses thats why i converted to that format to open in …

Hi You can’t edit the stl file directly – although you work with the mesh editing (edit the triangles in the mesh) – you have to transform the mesh to surfaces – and edit them. To export to IGES or any other format would not help – it only transform the coordinates of nodes of each triangle surface…

thank you sir for reply how to perform 1): transform the mesh to surfaces : presently i am using meshmixer after 3D slicer to rectify or smoothing the surfaces, i will try there if possible. thanks again

hello vilem Vrbicky is any tutorial is available related to mesh editing, i haven,t get the success in edit it???

[image] deepmech: presently i am using meshmixer after 3D slicer to rectify or smoothing the surfaces MeshMixer is a very nice tool but you should be very careful in using it for surfaces obtained from medical images. The main limitation of MeshMixer is that it cannot show you the original i…

How to edit segments: Segment editor reference manual: http://slicer.readthedocs.io/en/latest/user_guide/module_segmenteditor.html Tutorials: https://www.slicer.org/wiki/Documentation/Nightly/Training#Segmentation_for_3D_printing Video tutorial: If you have a surface mesh then you have to impor…

thankyou lassoan sir i learned the smoothing and editing in 3D slicer thats ok. problem is : we know the bones are made up of two types :1) cortical outer region 2) cancellous inner region so that i want to keep that two volume separate to provide material properties. the file from 3D slicer is…

Create separate segments for cortical and cancellous bone regions.

Bone segmentation to create 3D-printable STL

Support

Topic		Replies	Views
Difficulty with editing new segments imported as stl files Support segmentation	3	2006	February 14, 2019
Convert stl to segmentation and use effect of Segment Editor Support segmentation	1	631	August 3, 2019
Converting .stl files into segments for editing Support	5	2956	July 26, 2019
Use a segmentation to create .stl file for 3D printing Support	6	4613	March 20, 2018
Is it possible to open the stl file, cut the desired part, and save it? Support stl	3	704	December 1, 2021

Bone segmentation to create 3D-printable STL

Related topics